Arduino (MySensors W5100 Gateway) closing TCP connection (2us- NOT 2ms) after each sending of data
-
Hello Everybody,
just noticed with Wireshark, that TCP connection is closing after Arduino sends something!
UDP does not do that with the same sketch!!!!
It is closing after 2 MICROSECONDS not Milliseconds.. so it means, that TCP does not wait for anything and just closing...
Did somebody noticed that too?
i am working with a latest DEV branch.
Thank you in Advance!
-
Hello Everybody,
checked yesterday and noticed, that if i use JUST STANDARD "TCP W5100) Sketch, it happens (Connection is closing just (2 MICROseconds) after Arduino sends something and just after that it starting to establish a new connection over the next TCP port!
Checked everything with WIRESHARK.
WHEN I USE STANDARD ETHERNET sketch, from the Standard Arduino Library Example:
https://github.com/arduino/Arduino/tree/master/libraries/Ethernet
everything is just fine!
Should i place it as an Issue?