Meetup in the Netherlands - Saturday July 30th, in Breda!
-
COOOOOL just 10 min driving for me !And maybe can arrange some people to take some home made (open-hardware) PCB's
There's more than meets the eye
-
COOOOOL just 10 min driving for me !And maybe can arrange some people to take some home made (open-hardware) PCB's
@the-cosmic-gate great! Hardware designs are always appreciated :+1:
Don't forget to register upfront BTW! -
@the-cosmic-gate great! Hardware designs are always appreciated :+1:
Don't forget to register upfront BTW!@Yveaux said:
@the-cosmic-gate great! Hardware designs are always appreciated :+1:
Don't forget to register upfront BTW!
Sure, and it's @CM i read .... ( NAC Breda sponsor :) )The idea is that some people who designed some open hardeware PCB's like @GertSanders en off course @TheoL can bring or show there hardware .
And people can buy it for example -
COOOOOL just 10 min driving for me !And maybe can arrange some people to take some home made (open-hardware) PCB's
@the-cosmic-gate great stuff :) on more from the 'local' area. 10 minutes away.. Mmm Teteringen???
-
@the-cosmic-gate great stuff :) on more from the 'local' area. 10 minutes away.. Mmm Teteringen???
@sincze said:
@the-cosmic-gate great stuff :) on more from the 'local' area. 10 minutes away.. Mmm Teteringen???
hahah almost : Etten-Leur / Hoeven :P ( i drive a bit faster then normal :P )
There's more than meets the eye
-
@sincze said:
@the-cosmic-gate great stuff :) on more from the 'local' area. 10 minutes away.. Mmm Teteringen???
hahah almost : Etten-Leur / Hoeven :P ( i drive a bit faster then normal :P )
@the-cosmic-gate
Aha ho-even... Count me in from oudenbosch :) -
@Yveaux said:
@the-cosmic-gate great! Hardware designs are always appreciated :+1:
Don't forget to register upfront BTW!
Sure, and it's @CM i read .... ( NAC Breda sponsor :) )The idea is that some people who designed some open hardeware PCB's like @GertSanders en off course @TheoL can bring or show there hardware .
And people can buy it for example@the-cosmic-gate I'm attending the Meetup, but I'm afraid I won't be able to bring some stuff. But if there are any questions I'm happy to answer them. We could design some MySensors stuff together, like a design-a-ton?
-
@the-cosmic-gate I'm attending the Meetup, but I'm afraid I won't be able to bring some stuff. But if there are any questions I'm happy to answer them. We could design some MySensors stuff together, like a design-a-ton?
-
@TheoL Hi Theo, maybe you can make some pictures of your sensors and give a nice presentation???
-
-
@sincze I'm currently working on something. It's not really fance buy I have a lot of fun making it.
Will there be a domoticz controller?
-
@TheoL we're still looking for people who want to tell /present something. Would you like to show it there?
@Yveaux I'd love to but then I would have to make a promise I can't keep. The reason why I not have been active in this community for the last couple of months, is because I'm following an online course at San Diego university. This takes up most of my spare time. My employer paid for this so I can't slow down.
At the moment I'm doing the final capstone. Which I hope to finish within 5 weeks. Maybe I'll finish it before the meetup, but most likely I won't. That's not the only reason I want to finish it. I'm taking classes to become a therapist. It's just something I like to do, I'm not gonna do this for a living. The next year starts in September. So if I finish the capstone, I'll have the month of August without any obligations, which sound great for a change.
I just don't want to give you hope that I'll be able to finish my capstone before the meetup and have time left to prepare a good presentation. But I'll promiss I'll bring my latest project. Just don't expect it to be really original.
-
If somebody wants to do a presentation, but has no inspiration for one. I'm interested in the following topic(s):
-
Demo of how to mod a proMini so that it can be run on batteries (like removing the annoying led e.t.c.).
-
The electronics for emulating a touch button (like the one's found in coffee machines). I'd love to MySensorfy my coffee machine ;-) So that I'll wakeup with the smell of fresh coffee...
-
Do's and don'ts when writing sketches.
-
Sharing experience of the different Home Automation we all have
-
Present the configuration of your own Home Automation system???
Maybe we can brainstorm about a new awesome sensor. I'll bring me laptop and some electronics with me, so that I can do some coding if needed,
-
-
@Yveaux I'd love to but then I would have to make a promise I can't keep. The reason why I not have been active in this community for the last couple of months, is because I'm following an online course at San Diego university. This takes up most of my spare time. My employer paid for this so I can't slow down.
At the moment I'm doing the final capstone. Which I hope to finish within 5 weeks. Maybe I'll finish it before the meetup, but most likely I won't. That's not the only reason I want to finish it. I'm taking classes to become a therapist. It's just something I like to do, I'm not gonna do this for a living. The next year starts in September. So if I finish the capstone, I'll have the month of August without any obligations, which sound great for a change.
I just don't want to give you hope that I'll be able to finish my capstone before the meetup and have time left to prepare a good presentation. But I'll promiss I'll bring my latest project. Just don't expect it to be really original.
@TheoL I totally understand! We all use MySensors for our hobby projects, and are in constant struggle to find a balance between private life, hobbys and work (and even more...).
If you manage to have some presentation available on July 30th, then we'll just slip it in on the agenda.
There will also be room for some static display, or just visit and enjoy the day with fellow MySensors enthusiasts! -
If somebody wants to do a presentation, but has no inspiration for one. I'm interested in the following topic(s):
-
Demo of how to mod a proMini so that it can be run on batteries (like removing the annoying led e.t.c.).
-
The electronics for emulating a touch button (like the one's found in coffee machines). I'd love to MySensorfy my coffee machine ;-) So that I'll wakeup with the smell of fresh coffee...
-
Do's and don'ts when writing sketches.
-
Sharing experience of the different Home Automation we all have
-
Present the configuration of your own Home Automation system???
Maybe we can brainstorm about a new awesome sensor. I'll bring me laptop and some electronics with me, so that I can do some coding if needed,
-
-
@TheoL Thanks for the ideas!
I still have to prepare a presentation and really appreciate input on which topics people like to hear about. -
@Yveaux I hope I will make a presentation. I am too busy now too so I do not promise a thorough lecture. But I plan to share some hardware practices with my new boards as examples.
-
Since I cannot go to the meeting but I already bought a ticket is there anybody who wants a ticket for 10 euro?
I'm selling mine. -
Since I cannot go to the meeting but I already bought a ticket is there anybody who wants a ticket for 10 euro?
I'm selling mine.@Sander-Stolk I'm sorry you hear you can't attend the meeting. But maybe we'll meet another time.
-
@Yveaux Do you know if someone is bringing a MySensor gateway (id=1) and Domoticz? Maybe I can bring my new project with me and demonstrate it. I'm currently bug fixing, but I think it'll be a cool project to show to you guys. Maybe I can explain some of the design choices and some of the code. Because the hardware part is really easy but the coding was a p*1n in the butt. I think I almost pushed my ProMini to the max.
I hope that I can finish it before the 30th so no hard promise. It's still mySensors 1.5.4 but it should work on 2.0 I guess.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login