💬 MDMSNode "Lighting" Rev 1.1
-
-
Added thermal fuse.
-
The first batch of devices will be shipping to the customer soon :airplane:
-
Now i can understand the modifications on the rev1.1. Do you detect in the firmware if the light is off or on with the ACS712 ? Does the push switch from the wall will still be acting independently of this Mysensors board?
Light status (on/off) will update when the physical switch will be pressed? -
Now i can understand the modifications on the rev1.1. Do you detect in the firmware if the light is off or on with the ACS712 ? Does the push switch from the wall will still be acting independently of this Mysensors board?
Light status (on/off) will update when the physical switch will be pressed?@jeremushka I developed this device and added functionality to it that can be useful for many users of MySensors technology. Personally, I use only the lamp on / off function. I do not use the wall switch, current flow detecting, etc. I can only theoretically answer on your questions. For confirmation it, is necessary to implement all this in the sketch.
@jeremushka said in 💬 MDMSNode "Lighting" Rev 1.1:
Do you detect in the firmware if the light is off or on with the ACS712 ?
It is possibility.
@jeremushka said in 💬 MDMSNode "Lighting" Rev 1.1:
Does the push switch from the wall will still be acting independently of this Mysensors board?
Wall switch must connect directly to terminal block. No other connections should be.
@jeremushka said in 💬 MDMSNode "Lighting" Rev 1.1:
Light status (on/off) will update when the physical switch will be pressed?
This needs to be controlled by the sketch.
-
@kalina, Thanks. So it will not work for my configuration. Wall switch (push button) is already installed. No possibilities to draw more electrical wires.
Moreover, if i put the board near the light, i have just the Neutral and the return wire from the wall switch. No Live wire to power on the mysensors board.
I think in my ase the best way is to manage everything in my garage in the electrical main board where all the wires are mapped. I can get L + N for mysensors power supply. And i can continue to reuse the original wall switch independently of the Mysensors board.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login