Windows GUI/Controller for MySensors

[diamantmatch]

wow, this is something!
would really love to set this up at home!
i also can't wait for your link to appear, really exited !

[Tibus]

Yeah, really looks nice!
Can't wait too for the link and more info about de OTA bootloader.
I'm making some industrial opensources sensor based on MySensor and my current bootloader don't have an OTA Bootloader. So it would be greate with your Bootloader and your application!

[p0lar]

Nice.... Following

[jribera]

This looks very interesting. Seems like it will make remote debugging easy, ie can run this on a PC at home and RDP into it.

[chris021]

Also Following. Very keen to try this!

[RJ_Make]

Will this program act like a controller (take the place of Vera?) and handle automation logic?

[tekka]

hi all,

here is the first alpha version of the MYSController (I changed the name).

http://goo.gl/9DCWNo

There are still lots of things that need to be done and some bugs :), but feel free to give it a try. I included the modified bootloader (flash according to the settings in the fuses.txt file) and two example .hexs for testing/uploading. From my experience, the OTA works better/faster using the serial gateway.

Cheers,
tekka

[chris021]

Got it working first try! Can see data coming back from my Temp and Hum sensors!

Looks like a great tool.

Thank you!

[daulagari]

@tekka

here is the first alpha version of the MYSController

:+1:

Saw it was a Windows executable but did give it a try on Linux:

wine MYSController.exe

And the GUI comes up nicely!

I can not select the serial port yet, so could not test it further, likely have to do some mapping in wine.

[hek]

Yepp.. GUI comes up on mac using wine as well. Will try tomorrow when I have an Arduino nearby.

[Tibus]

is it possible tu use the ota bootloader on 8Mhz?

[tekka]

For OTA should be ok, for AVRDUDE not tested

[Tibus]

OK, Thank's!

The GUI doesn't work on mac with wine. The program is running good but do not recognize the usb device (even with a symbolic link to wine,...). Is it possible to get the program on mac?

[tekka]

@Tibus
I will look into that. Meanwhile, can you try to link the serial gateway to localhost (e.g. ser2net or socat) and connect via tcp?

[Tibus]

ok, I'll try that. Really looking forward to play with it ;D

[daulagari]

I can not select the serial port yet, so could not test it further, likely have to do some mapping in wine.

Took some time to find out but after:

• Adding a mapping from the Linux serial port to the Wine dosdevice configuration:
  ln -s /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_* ~/.wine/dosdevices/COM3

• Adding to ~/.wine/system.reg:

    [Hardware\\Devicemap\\Serialcomm] 1231984861
    @=""
    "Serial0"="COM1"
    "Serial1"="COM2"
    "Serial2"="COM3" 

I could start MYSController.exe and select COM3 and get:

But after pressing OK things look to work however:

@tekka : Thanks!

[tekka]

@daulagari thanks for the workaround. Success with OTA?

[daulagari]

Doing OTA did work once but trying a second time did not work out yet.

I found that it is important the user that runs "wine MYSController.exe" must have access to the port ~/.wine/dosdevices/COMx links to:

$ ls -als /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_*
0 lrwxrwxrwx 1 root root 13 25 jan 09:38 /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A9SZN99X-if00-port0 -> ../../ttyUSB0

Is not good ("root root"), I changed the link to to:

$ ls -asl /dev/ttyUSB0 
0 crw-rw---- 1 root dialout 188, 0 25 jan 11:34 /dev/ttyUSB0

In the debug log I see the 0;0;3;0;14;Gateway startup complete. message but no messages from the sensor.

Looks like the "File not open." window I am getting and:

fixme:comm:set_queue_size insize 4096 outsize 0 unimplemented stub

I am seeing on the command line has something to do with it.

NB: Seems like the GUI is programmed using TK. How about compiling it for Linux?

[tekka]

@daulagari
interesting, do you get the "File not open" message with AutoFW disabled? Also, what happens if you reboot the gateway several times (reset button), does the "Gateway startup complete" message re-appear? I recall that I had problems with OTA with the debug-mode enabled in config.h, the gateway kept freezing when sending OTA messages.
The controller is written in lazarus/fpc - porting to mac or *nix should be straight forward, I'll have a look.

[daulagari]

I have AutoFW disabled.

The funny thing is that things do not work at all if I do not get the "File not open" error.
No, rebooting the gateway does not make the "Gateway startup complete" message re-appear.

Did watch the serial port using interceptty and see data is passed so it seems like Wine is not passing it.