Blinds control
-
Hello,
I made an interface that controls my blind by using the remote control.
The actual plugin does work but I have to turn on and off each button as I only require a short push of a button to get the blind going. I don't need to be pressing the button for a long time for the blind to move.
What I'd like to do is to have a new element in VERA with 3 buttons: UP, STOP and DOWN. This buttons just send a command to the arduino node that makes the click on the remote.
Now I have 3 light switches per blind were I only need one device.Can anyone help me get started?
Thanks in advance. -
You should have a look at the ServoActuator example. It creates a window covering device in vera which has the buttons you need.
-
Ok, thnaks. I'll take a look at it.
I found this on the micasaverde forum, but I don't even know how to start adapting it to be used by my sensors api.Vera plugins just are out of my control.
I'll try to open the files and see what I find. -
You should have a look at the ServoActuator example. It creates a window covering device in vera which has the buttons you need.
@hek
I'm a little confused as to how to add more servos to the node.
I need 3 of them, but is not as easy as it was on the temperature sensor for example.
I need to create 3 servo objects with different names?
What's attachedServo stand for?
I'm a little lost with this -
@hek
I'm a little confused as to how to add more servos to the node.
I need 3 of them, but is not as easy as it was on the temperature sensor for example.
I need to create 3 servo objects with different names?
What's attachedServo stand for?
I'm a little lost with this -
You can remove all servo stuff (as you don't use servos right?). This is just an example of receiving commands from vera for the window-cover-device (stop/up/down buttons).
@hek
Yes, not needing to control an actual servo, but the logic works pretty good for what I need.
The problem is that no matter what I can't get Vera to show 3 devices (as if I had 3 servos).
I search through the api and found nothing about it.
How do I add 2 more servos to this node?
The example says i could have up to eight, but is not clear to me how to accomplish that. -
Maybe I don't understand... but I guess you just create three child-devices.
gw.sendSensorPresentation(1, S_COVER);
gw.sendSensorPresentation(2, S_COVER);
gw.sendSensorPresentation(2, S_COVER);And remove Servo-class from the example as you cannot use it without attaching physical servos.
-
Maybe I don't understand... but I guess you just create three child-devices.
gw.sendSensorPresentation(1, S_COVER);
gw.sendSensorPresentation(2, S_COVER);
gw.sendSensorPresentation(2, S_COVER);And remove Servo-class from the example as you cannot use it without attaching physical servos.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login