💬 EFEKTA Temperature & Humidity mini sensor
-
@instrumentsmeco
perhaps it will be more interesting extended version ... coming soon ;)
E-paper Temp&Hum sensor | First prototype test | MySensors -
The second revision of the pcb. Added mounting holes for mounting to the device body. Added cutouts for the buttons. Added temperature barrier for temperature and humidity sensor. The lines are moved as far away from the antenna as possible. The empty areas on the Board are filled and connected to the ground.
-
@mika said in 💬 EFEKTA Temperature & Humidity mini sensor:
Hi,
exist some enclosures for your sensors?
MiKaHi, this is a problem, for now, I do it, but I practically have no time for it. But I will definitely make them myself. Maybe I will do them on industrial equipment, if some people like my devices, now they are testing them :)
-
@mika said in 💬 EFEKTA Temperature & Humidity mini sensor:
Hi,
exist some enclosures for your sensors?
MiKaHi, this is a problem, for now, I do it, but I practically have no time for it. But I will definitely make them myself. Maybe I will do them on industrial equipment, if some people like my devices, now they are testing them :)
-
@berkseo do you have a 3d Model of the Sensor? I could support with designing a housing if you want!
-
Started the development of the case...
Remember to support the project with your likes !!! :)
-
@berkseo
Update, the hull prototype is ready. Developed at SOLIDWORKS. It was printed on a 3D printer type SLA. Trial printing on opaque resins has been started. This case cannot be reproduced on the printer type FDM. -
One button is reset, the second button is multifunctional. Depends on how many seconds you hold this button. In my program, I use this button to connect via air to other devices and to transfer the device to receive settings (data transmission intervals, led operation and so on). This button is not used in my test sketch
An example of direct connection between devices (without the use of controllers, without changing the SOFTWARE) is my development, which is in the testing stage is the controller of Underfloor heating. This device controls the five contours of the Underfloor heating. Up to 10 such temperature sensors can be connected to this device simply by pressing the connect button. Maximum of two temperature sensors per one relay channel.
Examples of direct connections (micro-networks) based on MySensors can be found here:
-
-
Is it possible for you to share the sketch as it has been removed from the project presentation because of the rules of the website?
-
Is it possible for you to share the sketch as it has been removed from the project presentation because of the rules of the website?
@jeremushka said in 💬 EFEKTA Temperature & Humidity mini sensor:
Is it possible for you to share the sketch as it has been removed from the project presentation because of the rules of the website?
