problem with RF24 and switching relays
-
Hello,
I have a problem with nodes that switch a relay, after switching the relay, the node is often no longer accessible and thus the relay is no longer switchable the error message is:
2019-02-10 17:01:33.737 Error: MySensors: Command not received by Node !! (node_id: 11, child_id: 4)I have the problem with several knots independently of each other
MySensor 2.3
components:
-
@mhofer The serial log of the node might reveal what's going on with the node.
It could very well be the inductive kick from switching the relay that resets or hangs your node.
How is everything connected?
2 out of 2
Suggested Topics
-
Day 1 - Status report
Announcements • 23 Mar 2014, 22:45 • hek 24 Mar 2014, 20:12 -
Echo request is not set
Troubleshooting • 12 Aug 2024, 15:36 • kamilb85 3 Sept 2024, 08:58 -
NODs stop responding, but ping works.
Troubleshooting • about 20 hours ago • Marcin about 20 hours ago -
Compiling Sensor code using BME280 and ESP8266
Troubleshooting • 12 days ago • dpcons 11 days ago -
Getting system time from the controller
Troubleshooting • 11 days ago • dpcons 7 days ago -
Can not compile MySensors on esp8266
Troubleshooting • 24 Aug 2024, 15:35 • TheoL 29 Aug 2024, 20:47
