[SOLVED] Need help with ESP8266 MQTT Gateway (RFM69HW radio)

willemx

Yes, I can see the gateway connecting to the broker. And yes, it is a local sensor that is trying to find the gateway (I just copied the "door/window/button" example sketch for testing)

electrik

It looks like the gateway is stuck in a loop. Could you post your code?

willemx

This is the gateway code: (comments left out)

#define MY_DEBUG

#define MY_BAUD_RATE 9600

#define MY_RADIO_RFM69
#define MY_IS_RFM69HW
#define MY_RFM69_IRQ_PIN D1
#define MY_RFM69_IRQ_NUM MY_RFM69_IRQ_PIN
#define MY_RFM69_CS_PIN D8

#define MY_GATEWAY_MQTT_CLIENT
#define MY_GATEWAY_ESP8266

#define MY_MQTT_PUBLISH_TOPIC_PREFIX "mygateway2-out"
#define MY_MQTT_SUBSCRIBE_TOPIC_PREFIX "mygateway2-in"

#define MY_MQTT_CLIENT_ID "mysensors-2"

#define MY_WIFI_SSID "TOUTATIS"
#define MY_WIFI_PASSWORD "XXXXXXXXXXXXXX"

#define MY_CONTROLLER_IP_ADDRESS 192, 168, 178, 90

#define MY_PORT 1883

#include <ESP8266WiFi.h>
#include <MySensors.h>

void setup() {}

void presentation() {}

void loop() {}

This is the sensor node code:

#define MY_DEBUG 

#define MY_RADIO_RFM69
#define MY_IS_RFM69HW

#include <MySensors.h>
#include <Bounce2.h>

#define CHILD_ID 3
#define BUTTON_PIN  3

Bounce debouncer = Bounce(); 
int oldValue=-1;

MyMessage msg(CHILD_ID,V_TRIPPED);

void setup()  
{  
  pinMode(BUTTON_PIN,INPUT);
  digitalWrite(BUTTON_PIN,HIGH);
  debouncer.attach(BUTTON_PIN);
  debouncer.interval(5);
}

void presentation() {
  present(CHILD_ID, S_DOOR);  
}

void loop() 
{
  debouncer.update();
  int value = debouncer.read();

  if (value != oldValue) {
     send(msg.set(value==HIGH ? 1 : 0));
     oldValue = value;
  }
}

This is the sensor node log:

 __  __       ____
|  \/  |_   _/ ___|  ___ _ __  ___  ___  _ __ ___
| |\/| | | | \___ \ / _ \ `_ \/ __|/ _ \| `__/ __|
| |  | | |_| |___| |  __/ | | \__ \  _  | |  \__ \
|_|  |_|\__, |____/ \___|_| |_|___/\___/|_|  |___/
        |___/                      2.3.2

16 MCO:BGN:INIT NODE,CP=RRNNA---,FQ=8,REL=255,VER=2.3.2
28 TSM:INIT
28 TSF:WUR:MS=0
32 TSM:INIT:TSP OK
34 TSM:FPAR
38 ?TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
2048 !TSM:FPAR:NO REPLY
2050 TSM:FPAR
2054 ?TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
4063 !TSM:FPAR:NO REPLY
4065 TSM:FPAR
4069 ?TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
6078 !TSM:FPAR:NO REPLY
6080 TSM:FPAR
6084 ?TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
8093 !TSM:FPAR:FAIL
8095 TSM:FAIL:CNT=1
8097 TSM:FAIL:DIS
8099 TSF:TDI:TSL
18102 TSM:FAIL:RE-INIT
18104 TSM:INIT
18106 TSM:INIT:TSP OK
18110 TSM:FPAR
18114 ?TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
20123 !TSM:FPAR:NO REPLY
20125 TSM:FPAR
20129 ?TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
22138 !TSM:FPAR:NO REPLY
22140 TSM:FPAR
22145 ?TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
24154 !TSM:FPAR:NO REPLY
24156 TSM:FPAR
24160 ?TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
26169 !TSM:FPAR:FAIL
26171 TSM:FAIL:CNT=2
26173 TSM:FAIL:DIS
26175 TSF:TDI:TSL
36179 TSM:FAIL:RE-INIT
36182 TSM:INIT
............repeating endlessly

And this is the gateway log:

--- Miniterm on /dev/cu.SLAB_USBtoUART  9600,8,N,1 ---
--- Quit: Ctrl+C | Menu: Ctrl+T | Help: Ctrl+T followed by Ctrl+H ---
0�~?�4�Ҷ␞��␄OA␌r��61 MCO:BGN:INIT GW,CP=RRNGE---,FQ=80,REL=255,VER=2.3.2
118 TSF:LRT:OK
134 TSM:INIT
148 TSF:WUR:MS=0
167 TSM:INIT:TSP OK
scandone
state: 0 -> 2 (b0)
217 TSM:INIT:GW MODE
239 TSM:READY:ID=0,PAR=0,DIS=0
state: 2 -> 3 (0)
290 MCO:REG:NOT NEEDED
state: 3 -> 5 (10)
add 0
aid 4
cnt 
354 GWT:TPC:CONNECTING...

connected with TOUTATIS, channel 2
dhcp client start...
scandone
1441 MCO:BGN:STP
1459 MCO:BGN:INIT OK,TSP=1
1487 TSM:READY:NWD REQ
1515 ?TSF:MSG:SEND,0-0-255-255,s=255,c=3,t=20,pt=0,l=0,sg=0,ft=0,st=OK:
ip:192.168.178.68,mask:255.255.255.0,gw:192.168.178.1
2209 GWT:TPC:IP=192.168.178.68
2296 GWT:RMQ:CONNECTING...
2605 GWT:RMQ:OK
2622 GWT:TPS:TOPIC=mygateway2-out/0/255/0/0/18,MSG SENT
pm open,type:2 0
900148 TSF:SAN:OK
1201488 TSM:READY:NWD REQ
1201519 ?TSF:MSG:SEND,0-0-255-255,s=255,c=3,t=20,pt=0,l=0,sg=0,ft=0,st=OK:
1800148 TSF:SRT:OK
1800168 TSF:SAN:OK
2401489 TSM:READY:NWD REQ
2401520 ?TSF:MSG:SEND,0-0-255-255,s=255,c=3,t=20,pt=0,l=0,sg=0,ft=0,st=OK:

So it appears that the gateway is not hanging after all. It just takes a long time between log messages. It is doing a network discovery broadcast every 20 minutes or so.
But the gateway and sensor (1 meter distance) node do not connect...

electrik

Is the node id assigned automatically? Maybe you can try with a static id?

willemx

Yes, but this cannot be the problem. The node must first find a parent anyway.

Rolo6442u

For comparison, I have a MQTT Gateway running on a Wemos D1 for 2 months now, with a RFM69W. Works perfect. Here is my hardware setup and code, maybe it is of any help to you. Change the networkid, MQTT broker and wifi credentials to your own setup. I use static ID's on my nodes.

// Enable debug prints to serial monitor
#define MY_DEBUG

// Use a bit lower baudrate for serial prints on ESP8266 than default in MyConfig.h
#define MY_BAUD_RATE 9600

// Enables and select radio type (if attached)
#define MY_RADIO_RFM69
//#define MY_IS_RFM69HW
#define MY_RFM69_NETWORKID 83   // Own network ID, mysensors default is 100


#define MY_GATEWAY_MQTT_CLIENT
#define MY_GATEWAY_ESP8266

// Set this node's subscribe and publish topic prefix
#define MY_MQTT_PUBLISH_TOPIC_PREFIX "mygateway1-out"
#define MY_MQTT_SUBSCRIBE_TOPIC_PREFIX "mygateway1-in"

// Set MQTT client id
#define MY_MQTT_CLIENT_ID "mysensors-1"

// Enable these if your MQTT broker requires username/password
//#define MY_MQTT_USER "username"
//#define MY_MQTT_PASSWORD "password"

// Set WIFI SSID and password
#define MY_WIFI_SSID "xxxxxxx"
#define MY_WIFI_PASSWORD "xxxxxxxx"

// Set the hostname for the WiFi Client. This is the hostname
// passed to the DHCP server if not static.
#define MY_HOSTNAME "ESP8266_MQTT_GW"

// Enable MY_IP_ADDRESS here if you want a static ip address (no DHCP)
//#define MY_IP_ADDRESS 192,168,178,87

// If using static ip you can define Gateway and Subnet address as well
//#define MY_IP_GATEWAY_ADDRESS 192,168,178,1
//#define MY_IP_SUBNET_ADDRESS 255,255,255,0

// MQTT broker ip address.
#define MY_CONTROLLER_IP_ADDRESS 10, 0, 0, 47

//MQTT broker if using URL instead of ip address.
// #define MY_CONTROLLER_URL_ADDRESS "test.mosquitto.org"

// The MQTT broker port to to open
#define MY_PORT 1883

// Enable inclusion mode
//#define MY_INCLUSION_MODE_FEATURE
// Enable Inclusion mode button on gateway
//#define MY_INCLUSION_BUTTON_FEATURE
// Set inclusion mode duration (in seconds)
//#define MY_INCLUSION_MODE_DURATION 60
// Digital pin used for inclusion mode button
//#define MY_INCLUSION_MODE_BUTTON_PIN D1

// Set blinking period
#define MY_DEFAULT_LED_BLINK_PERIOD 300

// Flash leds on rx/tx/err
#define MY_DEFAULT_ERR_LED_PIN D4   // Red
#define MY_DEFAULT_TX_LED_PIN D3    // Yellow
#define MY_DEFAULT_RX_LED_PIN D2    // Green


#include <MySensors.h>

void setup()
{
	// Setup locally attached sensors
}

void presentation()
{
	// Present locally attached sensors here
}

void loop()
{
	// Send locally attached sensors data here
}

2020-03-15 07_13_27-sPlan 7.0 - [Z__mysensors_GatewayESP8266MQTTClient_GatewayESP8266MQTT.spl7].jpg

willemx

Thank you for your setup example. It is nearly identical to my setup (only I use RFM69HW's).
The only thing I can think of now is that the radio modules must be defective, but I have no means to test this) So I ordered a new batch of RFM69's and hope for the best...

[Edit]
I see that you do not use the following defines as instructed in link text:

#define MY_RFM69_IRQ_PIN D1
#define MY_RFM69_IRQ_NUM MY_RFM69_IRQ_PIN
#define MY_RFM69_CS_PIN D8

I have tried both with and without these defines, but it makes no difference.

electrik

Did you try to add a capacitor next to the power pins?

willemx

Yes, I added a capacitor to both radio's.

tekka

@willemx And you have 868Mhz modules?

willemx

Yes, that is what I ordered and also it is marked on the radio PCB's.

tekka

@willemx Can you try with the new rfm69 driver & debug verbose mode on both, node & gw - i.e.

#define MY_RFM69_NEW_DRIVER
#define MY_DEBUG_VERBOSE_RFM69

and post the debug logs here.

willemx

config on WEMOS D1 gateway:

#define MY_RADIO_RFM69
#define MY_RFM69_NEW_DRIVER
#define MY_DEBUG_VERBOSE_RFM69
#define MY_IS_RFM69HW

log:

--- Miniterm on /dev/cu.SLAB_USBtoUART  9600,8,N,1 ---
--- Quit: Ctrl+C | Menu: Ctrl+T | Help: Ctrl+T followed by Ctrl+H ---
0�~?�4�Ҷ␞��␄OAqr��62 MCO:BGN:INIT GW,CP=RPNGE---,FQ=80,REL=255,VER=2.3.2
119 TSF:LRT:OK
135 TSM:INIT
148 TSF:WUR:MS=0
166 RFM69:INIT
scandone
state: 0 -> 2 (b0)
state: 2 -> 3 (0)
state: 3 -> 5 (10)
add 0
aid 3
cnt 

connected with TOUTATIS, channel 2
dhcp client start...
ip:192.168.178.68,mask:255.255.255.0,gw:192.168.178.1
383 RFM69:INIT:PIN,CS=15,IQP=5,IQN=5
423 RFM69:PTX:LEVEL=5 dBm
450 !RFM69:INIT:SANCHK FAIL
479 !TSM:INIT:TSP FAIL
503 TSM:FAIL:CNT=1
523 TSM:FAIL:DIS
540 TSF:TDI:TSL
557 RFM69:RSL
pm open,type:2 0
10573 TSM:FAIL:RE-INIT
10597 TSM:INIT
10612 RFM69:INIT
10630 RFM69:INIT:PIN,CS=15,IQP=5,IQN=5
10673 RFM69:PTX:LEVEL=5 dBm
10702 !RFM69:INIT:SANCHK FAIL
10734 !TSM:INIT:TSP FAIL
10760 TSM:FAIL:CNT=2
10781 TSM:FAIL:DIS
10801 TSF:TDI:TSL
10820 RFM69:RSL
20838 TSM:FAIL:RE-INIT
20862 TSM:INIT
20877 RFM69:INIT
20895 RFM69:INIT:PIN,CS=15,IQP=5,IQN=5
20938 RFM69:PTX:LEVEL=5 dBm
20967 !RFM69:INIT:SANCHK FAIL
20999 !TSM:INIT:TSP FAIL
21025 TSM:FAIL:CNT=3
21047 TSM:FAIL:DIS
21066 TSF:TDI:TSL
21085 RFM69:RSL
31103 TSM:FAIL:RE-INIT
31127 TSM:INIT
31142 RFM69:INIT
31160 RFM69:INIT:PIN,CS=15,IQP=5,IQN=5
31203 RFM69:PTX:LEVEL=5 dBm
31232 !RFM69:INIT:SANCHK FAIL
31264 !TSM:INIT:TSP FAIL
31290 TSM:FAIL:CNT=4
31312 TSM:FAIL:DIS
31332 TSF:TDI:TSL
31350 RFM69:RSL
41368 TSM:FAIL:RE-INIT
41392 TSM:INIT
41407 RFM69:INIT
41425 RFM69:INIT:PIN,CS=15,IQP=5,IQN=5
41468 RFM69:PTX:LEVEL=5 dBm
41497 !RFM69:INIT:SANCHK FAIL
41529 !TSM:INIT:TSP FAIL
41555 TSM:FAIL:CNT=5
41577 TSM:FAIL:DIS
41596 TSF:TDI:TSL
41615 RFM69:RSL
51633 TSM:FAIL:RE-INIT
51657 TSM:INIT
51672 RFM69:INIT
51690 RFM69:INIT:PIN,CS=15,IQP=5,IQN=5
51733 RFM69:PTX:LEVEL=5 dBm
51762 !RFM69:INIT:SANCHK FAIL
51794 !TSM:INIT:TSP FAIL
51820 TSM:FAIL:CNT=6
51842 TSM:FAIL:DIS
51861 TSF:TDI:TSL
51880 RFM69:RSL
61898 TSM:FAIL:RE-INIT
61922 TSM:INIT
61937 RFM69:INIT
61955 RFM69:INIT:PIN,CS=15,IQP=5,IQN=5
61998 RFM69:PTX:LEVEL=5 dBm
62027 !RFM69:INIT:SANCHK FAIL
62059 !TSM:INIT:TSP FAIL
62085 TSM:FAIL:CNT=7
62107 TSM:FAIL:DIS
62126 TSF:TDI:TSL
62145 RFM69:RSL
122163 TSM:FAIL:RE-INIT
122188 TSM:INIT
122204 RFM69:INIT
122223 RFM69:INIT:PIN,CS=15,IQP=5,IQN=5
122267 RFM69:PTX:LEVEL=5 dBm
122298 !RFM69:INIT:SANCHK FAIL
122330 !TSM:INIT:TSP FAIL
122357 TSM:FAIL:CNT=7
122380 TSM:FAIL:DIS
122401 TSF:TDI:TSL
122421 RFM69:RSL
182439 TSM:FAIL:RE-INIT
182464 TSM:INIT
182480 RFM69:INIT
182499 RFM69:INIT:PIN,CS=15,IQP=5,IQN=5
182543 RFM69:PTX:LEVEL=5 dBm
182574 !RFM69:INIT:SANCHK FAIL
182606 !TSM:INIT:TSP FAIL
182633 TSM:FAIL:CNT=7
182656 TSM:FAIL:DIS
182677 TSF:TDI:TSL
182697 RFM69:RSL
242716 TSM:FAIL:RE-INIT
242741 TSM:INIT
242757 RFM69:INIT
242776 RFM69:INIT:PIN,CS=15,IQP=5,IQN=5
242820 RFM69:PTX:LEVEL=5 dBm
242851 !RFM69:INIT:SANCHK FAIL
242883 !TSM:INIT:TSP FAIL
242910 TSM:FAIL:CNT=7
242933 TSM:FAIL:DIS
242954 TSF:TDI:TSL
242974 RFM69:RSL
302992 TSM:FAIL:RE-INIT
303017 TSM:INIT
303033 RFM69:INIT
303052 RFM69:INIT:PIN,CS=15,IQP=5,IQN=5
303096 RFM69:PTX:LEVEL=5 dBm
303127 !RFM69:INIT:SANCHK FAIL
303159 !TSM:INIT:TSP FAIL
303186 TSM:FAIL:CNT=7
303209 TSM:FAIL:DIS
303230 TSF:TDI:TSL
303250 RFM69:RSL

log from Arduino Pro Mini sensor node:


 __  __       ____
|  \/  |_   _/ ___|  ___ _ __  ___  ___  _ __ ___
| |\/| | | | \___ \ / _ \ `_ \/ __|/ _ \| `__/ __|
| |  | | |_| |___| |  __/ | | \__ \  _  | |  \__ \
|_|  |_|\__, |____/ \___|_| |_|___/\___/|_|  |___/
        |___/                      2.3.2

16 MCO:BGN:INIT NODE,CP=RPNNA---,FQ=8,REL=255,VER=2.3.2
28 TSM:INIT
28 TSF:WUR:MS=0
30 RFM69:INIT
32 RFM69:INIT:PIN,CS=10,IQP=2,IQN=0
36 RFM69:PTX:LEVEL=5 dBm
38 TSM:INIT:TSP OK
40 TSM:INIT:STATID=42
45 TSF:SID:OK,ID=42
47 TSM:FPAR
47 RFM69:SWR:SEND,TO=255,SEQ=0,RETRY=0
53 RFM69:CSMA:RSSI=-104
59 ?TSF:MSG:SEND,42-42-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
2066 !TSM:FPAR:NO REPLY
2068 TSM:FPAR
2070 RFM69:SWR:SEND,TO=255,SEQ=1,RETRY=0
2074 RFM69:CSMA:RSSI=-107
2080 ?TSF:MSG:SEND,42-42-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
4089 !TSM:FPAR:NO REPLY
4091 TSM:FPAR
4093 RFM69:SWR:SEND,TO=255,SEQ=2,RETRY=0
4098 RFM69:CSMA:RSSI=-105
4104 ?TSF:MSG:SEND,42-42-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
6113 !TSM:FPAR:NO REPLY
6115 TSM:FPAR
6117 RFM69:SWR:SEND,TO=255,SEQ=3,RETRY=0
6121 RFM69:CSMA:RSSI=-106
6127 ?TSF:MSG:SEND,42-42-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
8136 !TSM:FPAR:FAIL
8138 TSM:FAIL:CNT=1
8140 TSM:FAIL:DIS
8142 TSF:TDI:TSL
8142 RFM69:RSL
18145 TSM:FAIL:RE-INIT
18147 TSM:INIT
18149 RFM69:INIT
18151 RFM69:INIT:PIN,CS=10,IQP=2,IQN=0
18155 RFM69:PTX:LEVEL=5 dBm
18157 TSM:INIT:TSP OK
18161 TSM:INIT:STATID=42
18163 TSF:SID:OK,ID=42
18165 TSM:FPAR
18167 RFM69:SWR:SEND,TO=255,SEQ=0,RETRY=0
18173 RFM69:CSMA:RSSI=-107
18180 ?TSF:MSG:SEND,42-42-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
20189 !TSM:FPAR:NO REPLY
20191 TSM:FPAR
20193 RFM69:SWR:SEND,TO=255,SEQ=1,RETRY=0
20197 RFM69:CSMA:RSSI=-103
20203 ?TSF:MSG:SEND,42-42-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
22212 !TSM:FPAR:NO REPLY
22214 TSM:FPAR
22216 RFM69:SWR:SEND,TO=255,SEQ=2,RETRY=0
22220 RFM69:CSMA:RSSI=-105
22226 ?TSF:MSG:SEND,42-42-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
24236 !TSM:FPAR:NO REPLY
24238 TSM:FPAR
24240 RFM69:SWR:SEND,TO=255,SEQ=3,RETRY=0
24244 RFM69:CSMA:RSSI=-109
24250 ?TSF:MSG:SEND,42-42-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
26259 !TSM:FPAR:FAIL
26261 TSM:FAIL:CNT=2
26263 TSM:FAIL:DIS
26265 TSF:TDI:TSL
26267 RFM69:RSL
36270 TSM:FAIL:RE-INIT
36272 TSM:INIT
36274 RFM69:INIT
36276 RFM69:INIT:PIN,CS=10,IQP=2,IQN=0
36280 RFM69:PTX:LEVEL=5 dBm
36282 TSM:INIT:TSP OK
36286 TSM:INIT:STATID=42
36288 TSF:SID:OK,ID=42
36290 TSM:FPAR
36292 RFM69:SWR:SEND,TO=255,SEQ=0,RETRY=0
36298 RFM69:CSMA:RSSI=-105
36304 ?TSF:MSG:SEND,42-42-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
38316 !TSM:FPAR:NO REPLY
38318 TSM:FPAR
38320 RFM69:SWR:SEND,TO=255,SEQ=1,RETRY=0
38324 RFM69:CSMA:RSSI=-105
38330 ?TSF:MSG:SEND,42-42-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
40339 !TSM:FPAR:NO REPLY
40341 TSM:FPAR
40343 RFM69:SWR:SEND,TO=255,SEQ=2,RETRY=0
40347 RFM69:CSMA:RSSI=-102
40353 ?TSF:MSG:SEND,42-42-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
42362 !TSM:FPAR:NO REPLY
42364 TSM:FPAR
42366 RFM69:SWR:SEND,TO=255,SEQ=3,RETRY=0
42371 RFM69:CSMA:RSSI=-104
42377 ?TSF:MSG:SEND,42-42-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
44386 !TSM:FPAR:FAIL
44388 TSM:FAIL:CNT=3
44390 TSM:FAIL:DIS
44392 TSF:TDI:TSL
44394 RFM69:RSL
54398 TSM:FAIL:RE-INIT
54401 TSM:INIT
54403 RFM69:INIT
54405 RFM69:INIT:PIN,CS=10,IQP=2,IQN=0
54409 RFM69:PTX:LEVEL=5 dBm
54411 TSM:INIT:TSP OK
54415 TSM:INIT:STATID=42
54417 TSF:SID:OK,ID=42
54419 TSM:FPAR
54421 RFM69:SWR:SEND,TO=255,SEQ=0,RETRY=0
54427 RFM69:CSMA:RSSI=-105
54433 ?TSF:MSG:SEND,42-42-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
56442 !TSM:FPAR:NO REPLY
56444 TSM:FPAR
56446 RFM69:SWR:SEND,TO=255,SEQ=1,RETRY=0
56451 RFM69:CSMA:RSSI=-104
56457 ?TSF:MSG:SEND,42-42-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
58466 !TSM:FPAR:NO REPLY
58468 TSM:FPAR
58470 RFM69:SWR:SEND,TO=255,SEQ=2,RETRY=0
58474 RFM69:CSMA:RSSI=-104
58480 ?TSF:MSG:SEND,42-42-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
60489 !TSM:FPAR:NO REPLY
60491 TSM:FPAR
60493 RFM69:SWR:SEND,TO=255,SEQ=3,RETRY=0
60497 RFM69:CSMA:RSSI=-102
60504 ?TSF:MSG:SEND,42-42-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
62513 !TSM:FPAR:FAIL
62515 TSM:FAIL:CNT=4
62517 TSM:FAIL:DIS
62519 TSF:TDI:TSL
62521 RFM69:RSL
72525 TSM:FAIL:RE-INIT!

tekka

@willemx said in Need help with ESP8266 MQTT Gateway (RFM69HW radio):

450 !RFM69:INIT:SANCHK FAIL

There is a problem with the rfm69 module and/or wiring on your GW - can you exchange the rfm69 module with the one from the node and post the logs?

willemx

:tada: :tada: :tada:
You were right; there was a minuscule piece of wire strand between two contacts and after removing it all is fine now.
Also checked all the radio's again which is easy now I have a working configuration and there was indeed one defective radio module.
Thanks everyone for unblocking me!

tekka

@willemx Excellent! Have fun! :+1:

[SOLVED] Need help with ESP8266 MQTT Gateway (RFM69HW radio)

13

12.0k

11.2k

113.4k