Any mass produced prototyping shields for the pro mini?
-
I looked, and I'm not finding any. Surely, it cannot be true?
-
-
Seems like there should be something better. I'm specifically thinking of how to cheaply yet cleanly hook up the RFM69x.
Ideally, all the pins would connect upwards into the protoboard so that it can be attached/detached cleanly just via header pins.
-
Here's an interesting board, becauseit also considers what kind of box it might ultimately go into:
-
Actually, it looks as though virtually any 2.54 pitch prototyping board would easily mate with a pro mini. There's no "oops" with the pitch as there was with the Uno to prevent it.
-
Actually, it looks as though virtually any 2.54 pitch prototyping board would easily mate with a pro mini. There's no "oops" with the pitch as there was with the Uno to prevent it.
@NeverDie Not exactly mass produced, but here are some other options:
https://oshpark.com/shared_projects/uXIff7XO
https://oshpark.com/shared_projects/pRJiKWxV
https://oshpark.com/shared_projects/nJ8HNuZj
Cheers
Al
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login