Meet in Malmö, Summer 2016?

[tbowmo]

@bjacobse

I plan to be there at 11ish (give or take a little).

About your programmer issue.. Do you have a oscilloscope at hand? They normally have a 1Khz 5v output that could be used to drive the clock input on your atmega (have done this a couple of times to resurrect a "dead" atmega8)

[mfalkvidd]

Not sure if it helps, but 976.5625Hz is possible to get from PWM on a 16MHz atmega328. Maybe that's close enough to 1kHz?

[tbowmo]

@mfalkvidd

There is no restriction on the clock input (I think it could be as high as 16Mhz) it was just an example of how to get a clock signal for reprogramming the device (and one that I know is working :D )

[bjacobse]

@tboha @mfalkvidd
Thank you guys for this OFF-topic question in this thread... Now my Arduino Pro Mini's are back alive again
I used this code http://forum.arduino.cc/index.php?topic=213053.msg1564631#msg1564631 uploaded into Arduino Duomilanove, used pin9 to touch the ATmega328P in Crystal clkpin1 - and success

On-topic you get first 2 beers on Saturday :-)

[hek]

Meat...

• IKEA variera hack to fit them all in the smoker...

[mfalkvidd]

@hek where do we point our GPSes to find your house? Kamrersvägen 59D ?

[Briske]

Looks good Hek, do we need anything for lunch? I can pick up some spicy sausages from Carnex on my way

[hek]

@mfalkvidd said:

Kamrersvägen 59D

Yes, this address (In Bjärred) will get you here.

[hek]

@Briske

Thanks but, not needed, lunch and dinner (for everyone) is already planned and purchased.

[hek]

Membranes removed and home brewed magic dust rub applied.

Now we just have to let it sit over night.

[bjacobse]

It's raining right now in Bunkeflostrand - hope weather are better in Bjärred tomorrow :-)
I'm driving with Tbowmo - I think we are arriving at 13ish. See ya' tomorrow guys

[TheoL]

And of course we are curious about how every thing is going. Can't wait to see some pictures.

[hek]

Ok, we've got some food:
https://www.youtube.com/watch?v=qPrYQwxnWFE

[Tore André Rosander]

I cant belive i missed this topic. Count me in next time, a perfect time to drop the kids off at their grandparents house in falkenberg on the way down and take home some cheap bacon, beer and sigaretts on the way home (norway) ;) Its a win, win, win situation.

A bit dissapointed that the bbq was not rigged with mysensors :\ hehe

[gregl]

Looks great guys!...especially your ribs @hek - Wish id been able to make it!

Speaking of cooking....there must have been some crazy ideas cooked up on what to mysensorize next??

(i've already thought of and semi built a mysensor meat thermometer...so anything else? )

[bjacobse]

Thank you all for a great event - it was nice to meet face-2-face and see who you are. And thank you to Henrik, wife and kids to hos us all

[tbowmo]

It was really nice seeing all of you, and collaborating on the release was so much easier when sitting together. A big thank you to @hek (and family) to host us geeks :)

[mfalkvidd]

Great photos @hek
I really enjoyed the day and meeting you all. Big thanks to hek and family!

[tomkxy]

Looks like you had a good time :-)

[TheoL]

It seems like you all had a great time. Hopefully we can say the same after the 30th of July.