Any plan to implement Ethernet GW?

drock1985

Haven't tried build-tools (tried build-essential, it couldn't find any packages) and I do have GCC installed.

Will try again when i'm done work for the evening and see what happens.

martinhjelmare

@drock1985

I think it's called development tools for Fedora. Google it.

If you can post the build log message, I could advise better. It could be a specific lib package that is missing for the compile. The log will usually give some hint on what's missing.

martinhjelmare

I've updated the branch at my fork of pymysensors. If you have installed the ethernet branch of my fork of home-assistant, you should uninstall/reinstall that, or just make a new virtual environment and install again. You should remove the lib directory in your home assistant config directory as well.

Eg:

rm -r ~/.homeassistant/lib
mkvirtualenv -p /usr/bin/python3 hasstest2
cd ~/dev/home-assistant
git branch -D mysensors-tcp-gateway
git fetch origin mysensors-tcp-gateway
git checkout mysensors-tcp-gateway
pip3 install -e .
pip3 install colorlog
pip3 install python-Levenshtein

drock1985

@martinhjelmare

Hi,

This is the error I am getting when starting up HASS.

(hasstest) pi@pitest:~/dev/home-assistant $ hass
Config directory: /home/pi/.homeassistant
16-03-05 20:07:56 INFO (MainThread) [homeassistant.core] Bus:Handling <Event service_registered[L]: service=turn_off, domain=homeassistant>
16-03-05 20:07:57 INFO (MainThread) [homeassistant.core] Bus:Handling <Event service_registered[L]: service=turn_on, domain=homeassistant>
16-03-05 20:07:57 INFO (MainThread) [homeassistant.core] Bus:Handling <Event service_registered[L]: service=toggle, domain=homeassistant>
16-03-05 20:07:57 INFO (MainThread) [homeassistant.bootstrap] Home Assistant core initialized
16-03-05 20:07:57 INFO (MainThread) [homeassistant.loader] Loaded history from homeassistant.components.history
16-03-05 20:07:57 INFO (MainThread) [homeassistant.loader] Loaded recorder from homeassistant.components.recorder
16-03-05 20:07:57 INFO (MainThread) [homeassistant.loader] Loaded http from homeassistant.components.http
16-03-05 20:07:57 INFO (MainThread) [homeassistant.loader] Loaded introduction from homeassistant.components.introduction
16-03-05 20:07:57 INFO (MainThread) [homeassistant.loader] Loaded updater from homeassistant.components.updater
16-03-05 20:07:57 INFO (MainThread) [homeassistant.loader] Loaded conversation from homeassistant.components.conversation
16-03-05 20:07:57 INFO (MainThread) [homeassistant.loader] Loaded mysensors from homeassistant.components.mysensors
16-03-05 20:07:59 INFO (MainThread) [homeassistant.loader] Loaded logbook from homeassistant.components.logbook
16-03-05 20:07:59 INFO (MainThread) [homeassistant.loader] Loaded sun from homeassistant.components.sun
16-03-05 20:07:59 INFO (MainThread) [homeassistant.loader] Loaded discovery from homeassistant.components.discovery
16-03-05 20:07:59 INFO (MainThread) [homeassistant.loader] Loaded frontend from homeassistant.components.frontend
16-03-05 20:07:59 INFO (MainThread) [homeassistant.loader] Loaded api from homeassistant.components.api
16-03-05 20:07:59 INFO (MainThread) [homeassistant.components.introduction]

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

        Hello, and welcome to Home Assistant!

        We'll hope that we can make all your dreams come true.

        Here are some resources to get started:

         - Configuring Home Assistant:
           https://home-assistant.io/getting-started/configuration/

         - Available components:
           https://home-assistant.io/components/

         - Troubleshooting your configuration:
           https://home-assistant.io/getting-started/troubleshooting-configuration/

         - Getting help:
           https://home-assistant.io/help/

        This message is generated by the introduction component. You can
        disable it in configuration.yaml.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

16-03-05 20:07:59 INFO (MainThread) [homeassistant.core] Bus:Handling <Event component_loaded[L]: component=introduction>
16-03-05 20:07:59 INFO (MainThread) [homeassistant.core] Bus:Handling <Event component_loaded[L]: component=recorder>
16-03-05 20:07:59 INFO (MainThread) [homeassistant.core] Bus:Handling <Event component_loaded[L]: component=http>
16-03-05 20:07:59 INFO (MainThread) [homeassistant.core] Bus:Handling <Event component_loaded[L]: component=history>
16-03-05 20:07:59 INFO (MainThread) [requests.packages.urllib3.connectionpool] Starting new HTTPS connection (1): pypi.python.org
16-03-05 20:08:00 INFO (MainThread) [homeassistant.core] Bus:Handling <Event state_changed[L]: old_state=None, new_state=<state updater.updater=0.14.2; friendly_name=Update Available @ 20:08:00 05-03-2016>, entity_id=updater.updater>
16-03-05 20:08:00 INFO (MainThread) [homeassistant.core] Bus:Handling <Event component_loaded[L]: component=updater>
16-03-05 20:08:00 INFO (MainThread) [homeassistant.core] Bus:Handling <Event service_registered[L]: service=process, domain=conversation>
16-03-05 20:08:00 INFO (MainThread) [homeassistant.core] Bus:Handling <Event component_loaded[L]: component=conversation>
16-03-05 20:08:00 ERROR (MainThread) [homeassistant.components.mysensors] Missing required configuration items in mysensors: port
16-03-05 20:08:00 ERROR (MainThread) [homeassistant.bootstrap] component mysensors failed to initialize
16-03-05 20:08:00 INFO (MainThread) [homeassistant.core] Bus:Handling <Event service_registered[L]: service=log, domain=logbook>
16-03-05 20:08:00 INFO (MainThread) [homeassistant.core] Bus:Handling <Event component_loaded[L]: component=logbook>
16-03-05 20:08:00 INFO (MainThread) [requests.packages.urllib3.connectionpool] Starting new HTTP connection (1): maps.googleapis.com
16-03-05 20:08:01 INFO (MainThread) [homeassistant.core] Bus:Handling <Event state_changed[L]: old_state=None, new_state=<state sun.sun=below_horizon; next_setting=22:12:29 06-03-2016, elevation=-21.55, next_rising=10:44:01 06-03-2016, friendly_name=Sun @ 20:08:01 05-03-2016>, entity_id=sun.sun>
16-03-05 20:08:01 INFO (MainThread) [homeassistant.core] Bus:Handling <Event component_loaded[L]: component=sun>
16-03-05 20:08:01 INFO (MainThread) [homeassistant.core] Bus:Handling <Event component_loaded[L]: component=discovery>
16-03-05 20:08:01 INFO (MainThread) [homeassistant.core] Bus:Handling <Event component_loaded[L]: component=api>
16-03-05 20:08:01 INFO (MainThread) [homeassistant.core] Bus:Handling <Event component_loaded[L]: component=frontend>
16-03-05 20:08:01 INFO (MainThread) [homeassistant.core] Starting Home Assistant (13 threads)
16-03-05 20:08:01 INFO (MainThread) [homeassistant.core] Bus:Handling <Event homeassistant_start[L]>
16-03-05 20:08:01 INFO (MainThread) [homeassistant.core] Bus:Handling <Event service_registered[L]: service=stop, domain=homeassistant>
16-03-05 20:08:01 INFO (MainThread) [homeassistant.core] Bus:Handling <Event service_registered[L]: service=restart, domain=homeassistant>
16-03-05 20:08:01 INFO (Thread-17) [homeassistant.components.http] Starting web interface at http://0.0.0.0:8123
16-03-05 20:08:01 INFO (Thread-15) [homeassistant.core] Timer:starting
16-03-05 20:08:01 INFO (Thread-18) [homeassistant.components.http] "GET /api/stream?api_password=no_password_set&restrict=state_changed,component_loaded,service_registered HTTP/1.1" 200 -
16-03-05 20:08:01 INFO (Thread-19) [homeassistant.components.http] "GET /api/bootstrap HTTP/1.1" 200 -^C16-03-05 20:08:01 INFO (MainThread) [homeassistant.core] Stopping
16-03-05 20:08:01 INFO (MainThread) [homeassistant.core] Bus:Handling <Event homeassistant_stop[L]>
16-03-05 20:08:02 INFO (Thread-16) [netdisco.service] Scanning
^CProcess Process-1:
Traceback (most recent call last):
Traceback (most recent call last):
  File "/home/pi/.virtualenvs/hasstest/bin/hass", line 9, in <module>
    load_entry_point('homeassistant', 'console_scripts', 'hass')()
  File "/home/pi/dev/home-assistant/homeassistant/__main__.py", line 330, in main
    keep_running, exit_code = run_hass_process(hass_proc)
  File "/usr/lib/python3.4/multiprocessing/process.py", line 254, in _bootstrap
    self.run()
  File "/usr/lib/python3.4/multiprocessing/process.py", line 93, in run
    self._target(*self._args, **self._kwargs)
  File "/home/pi/dev/home-assistant/homeassistant/__main__.py", line 248, in setup_and_run_hass
    exit_code = int(hass.block_till_stopped())
TypeError: 'bool' object is not iterable
  File "/home/pi/dev/home-assistant/homeassistant/core.py", line 100, in block_till_stopped
    self.stop()
  File "/home/pi/dev/home-assistant/homeassistant/core.py", line 107, in stop
    self.pool.stop()
  File "/home/pi/dev/home-assistant/homeassistant/util/__init__.py", line 364, in stop
    self.block_till_done()
  File "/home/pi/dev/home-assistant/homeassistant/util/__init__.py", line 358, in block_till_done
    self._work_queue.join()
  File "/usr/lib/python3.4/queue.py", line 86, in join
    self.all_tasks_done.wait()
  File "/usr/lib/python3.4/threading.py", line 290, in wait
    waiter.acquire()
KeyboardInterrupt

 mysensors:
   gateways:
     - device: '192.168.1.10'
       persistence_file: '~/.homeassistant/mysensors3.json'
       tcp_port: 5003
   debug: true
   persistence: true
   version: '1.5'

martinhjelmare

@drock1985

Did you checkout correct branch?

git fetch origin mysensors-tcp-gateway
git checkout mysensors-tcp-gateway

You should remove the lib directory in ~/.homeassistant/ before you start hass again after the git checkout also.

rm -r ~/.homeassistant/lib

drock1985

Ugh, forgot to run the checkout command. palm smacks head

Booting now, will report back in a minute if it is working or not.

martinhjelmare

@drock1985

Don't forget to use the correct ip address of your gateway in your network.

drock1985

@martinhjelmare

It works! Found my motion sensor with ease. Will start adding lights now shortly

Thanks again, loving this.

EDIT: Quick question: To autostart this, would I just use the normal Home-Assistant instructions in the virtualenv, or is there another method to do it?

martinhjelmare

@drock1985

:thumbsup:

When you have time, can you run git log and tell me the top commit message, so I know which version you are using.

Regarding autostart, no I don't think you can use the normal instructions together with the virtualenv. You could write a script, that changes to the virtualenv and starts hass, and run that script at login or similar.

If you don't have another production install of home assistant on the computer, you can skip the virtualenv alltogether and just do:

pip3 install --user "https://github.com/MartinHjelmare/home-assistant/archive/mysensors-tcp-gateway.zip"

or if you want to install as root:

sudo pip3 install "https://github.com/MartinHjelmare/home-assistant/archive/mysensors-tcp-gateway.zip"

This way you should be able to autostart the usual way, per instructions on the web.

But then if you want to test an update from me, you have to make sure you uninstall everything correctly and manually remove ~/.homeassistant/lib before you install again.

drock1985

@martinhjelmare

Here is the info you requested:

commit d07f8097a6186611371b8bc918fcb0d436bb39ba
Author: MartinHjelmare <marhje52@kth.se>
Date:   Sat Feb 27 04:55:38 2016 +0100

    Add mysensors tcp ethernet gateway

    * Replace CONF_PORT with CONF_DEVICE and ATTR_PORT with ATTR_DEVICE.
    * Add tcp_port in config.
    * Use fork pymysensors repo, temporarily.
    * Try to guess if tcp or serial gateway is configured, by validating
        device name as an ip address. If successful setup tcp gateway, if it
        fails, setup serial gateway.
    * Update device_state_attributes to show correct device, ethernet or
        serial.

commit 278fdc0983a8528945e13cf912da82f3bc5fe14c
Merge: 6dc49df 8ffa368
Author: Daniel Høyer Iversen <daniel.h.iversen@ntnu.no>
Date:   Fri Feb 26 10:49:10 2016 +0100

    Merge pull request #1385 from balloob/rfxtrx

    improve rfxtrx sensor
:

martinhjelmare

@drock1985

Sorry, I forgot I've only updated the pymysensors project, so you checking the home-assistant git log is no use. Well, I think your're running the lastest version anyway, since you got it working just now. Everything should be ok.

Let me know if you experience any problems.

If everything seems ok for you after some time of testing, I don't see why we can't release this very soon. My limited testing after the lastest update, show no problems.

Dave Dan

Hey @martinhjelmare,

I finally got this working.

I'm doing tests with a couple of multi-sensors (Temp, Hum, Light & motion). The discovery worked very well, no issue at all after following all the above steps.

What I'm not seeing wotking are the updates. I always see the same values. I'm checking messages with MYSController and I see the GW is receiving the events and updates but I can't see new values showing in the portal.

Still testing ...

martinhjelmare

@Dave-Dan

Do you mean that the sensors are not showing the latest values in the gui?

If the last value from a sensor is the same as the previous value, a state change won't happen. So the value will be reported as being as old as the previous value. Could this explain what you see?

Dave Dan

actually, I just got it working ...

yes, I was referrring to that. The way I have built the sensor is that everytime a movement is detected is sending all sensors statuses to the GW. This sensors are designed to be plugged (no battery powered) so no concern on power consumption.

I restarted the server and now updates are working.

What I'm seeing in the log is constantly this message:
16-03-14 10:39:53 INFO (Thread-9) [mysensors.mysensors] Permission denied when writing to /home/pi/dev/home-assistant/path/mysensors3.json

If I'm not wrong this is the persistence.

Apart of this I now see updates coming in ...

martinhjelmare

Good!

The path to the persistence file must exist, not the file itself, but the directory tree above, and hass should have write permission to it.

I usually put the file in the same directory as configuration.yml.

Dave Dan

Ok, couple of things that I'm seeing now.

Everytime I restart the server the MySensor nodes are no longer in the system. I have to restart them to get them in again. All of them are in the persistence file.
Now i can only have 1 node added.
While in the persistence file I see multiple nodes, once I add one of them I can't add anymore. No error if fired (at least not that I've seen).

martinhjelmare

@Dave-Dan

Can you attach the persistence file here and post your config, and I'll take a look?

Dave Dan

Sure!

Consistence file:

{"156": {"sketch_version": null, "children": {}, "battery_level": 0, "sketch_name": null, "type": 17, "sensor_id": 156}, "102": {"sketch_version": null, "children": {}, "battery_level": 0, "sketch_name": null, "type": 17, "sensor_id": 102}}

the Configuration is very light. Actually is the by default config and i just added this to test MySensors:

mysensors:
  gateways:
    - device: 192.168.1.X
      persistence_file: '/home/pi/.homeassistant/MSPersistence.json'
      tcp_port: 5003
  debug: true
  persistence: true
  version: '1.5'

let me know if you need anything else.

martinhjelmare

In the persistence file I can see two issues.

Sketch name is null for both nodes.
Both nodes don't have any children.

Are you using a non default example sketch, if so can you post it?

Dave Dan

hey Martin,

that's correct, those are the 2 items I saw that was little curious about.

The sketch I'm using, while custom, is a mix of different sketches that can be found in the MySensors page.

As you'll see below, each node (which are identical) have all the information (Sketch name, version, etc). And all of them have 4 childs:
- Ambient Humidity
- Ambient Temperature
- Ambient Light
- Movement (Motion Sensor Trip).

But I might have something wrong so ... happy to learn! :)

#include <SPI.h>
#include <MySensor.h>  
#include <DHT.h>  

#define NODE_ID 102

#define SKETCH_NAME "dyaSensor (HTLM) v1.2"
#define SKETCH_VERSION "1.2"

#define CHILD_ID_HUM 0
#define CHILD_ID_TEMP 1
#define CHILD_ID_LIGHT 2
#define CHILD_ID_MOV 3

#define HUMIDITY_SENSOR_DIGITAL_PIN 4
#define DIGITAL_INPUT_SENSOR 3   // The digital input you attached your motion sensor.  (Only 2 and 3 generates interrupt!)
#define INTERRUPT DIGITAL_INPUT_SENSOR-2 // Usually the interrupt = pin -2 (on uno/nano anyway)
#define LIGHT_SENSOR_ANALOG_PIN 0

#defin TEMP_CORRECTION 2

unsigned long SLEEP_TIME = 1000; // Sleep time between reads (in milliseconds)

MySensor gw;
DHT dht;
float lastTemp;
float lastHum;
int lastLightLevel;
boolean metric = true; 

//Building Messages
MyMessage msgHum(CHILD_ID_HUM, V_HUM);            // Initialize humidity message
MyMessage msgTemp(CHILD_ID_TEMP, V_TEMP);         // Initialize temperature message
MyMessage msgLum(CHILD_ID_LIGHT, V_LIGHT_LEVEL);  // Initialize Light message
MyMessage msgMov(CHILD_ID_MOV, V_TRIPPED);        // Initialize motion message

void setup()  
{ 

  gw.begin(NULL, NODE_ID, false);
  dht.setup(HUMIDITY_SENSOR_DIGITAL_PIN); 

  // Send the Sketch Version Information to the Gateway
  gw.sendSketchInfo(SKETCH_NAME, SKETCH_VERSION);

  pinMode(DIGITAL_INPUT_SENSOR, INPUT);      // sets the motion sensor digital pin as input

  // Register all sensors to gw (they will be created as child devices)
  Serial.println("Presenting Humidity Sensor");
  gw.present(CHILD_ID_HUM, S_HUM, "Humidity Sensor");
  
  Serial.println("Presenting Temperature Sensor");
  gw.present(CHILD_ID_TEMP, S_TEMP, "Temperature Sensor");
  
  Serial.println("Light Level Sensor");
  gw.present(CHILD_ID_LIGHT, S_LIGHT_LEVEL, "Light Level Sensor");
  
  Serial.println("Presenting Motion Sensor");
  gw.present(CHILD_ID_MOV, S_MOTION, "Motion Sensor");
  
  metric = gw.getConfig().isMetric;
}

void loop()      
{  

  // By calling process() you route messages in the background
  gw.process();
  
  delay(dht.getMinimumSamplingPeriod());

  float temperature = dht.getTemperature()-TEMP_CORRECTION;
  if (isnan(temperature)) {
      Serial.println("Failed reading temperature from DHT");
  } else if (temperature != lastTemp) {
    lastTemp = temperature;
    if (!metric) {
      temperature = dht.toFahrenheit(temperature);
    }
    gw.send(msgTemp.set(temperature, 1));
    Serial.print("- T: ");
    Serial.println(temperature);
  }
  
  float humidity = dht.getHumidity();
  if (isnan(humidity)) {
      Serial.println("Failed reading humidity from DHT");
  } else if (humidity != lastHum) {
      lastHum = humidity;
      gw.send(msgHum.set(humidity, 1));
      Serial.print("- H: ");
      Serial.println(humidity);
  }

  int lightLevel = (1023-analogRead(LIGHT_SENSOR_ANALOG_PIN))/10.23; 
  if (lightLevel != lastLightLevel) {
    lastLightLevel = lightLevel;
    gw.send(msgLum.set(lightLevel));
    Serial.print("- L: ");
    Serial.println(lightLevel);    
  }

  // Read digital motion value
  boolean tripped = digitalRead(DIGITAL_INPUT_SENSOR) == HIGH; 
  gw.send(msgMov.set(tripped?"1":"0"));  // Send tripped value to gw 
  Serial.println(tripped?"- Movement Detected":"- No Movement Detected");

  gw.sleep(INTERRUPT,CHANGE, SLEEP_TIME);
}

Any plan to implement Ethernet GW?

19

11.7k

11.2k

113.1k