Upgrade Ethernet GW -> 1.4 (wiznet)

[Hoffan]

Same for me.. Compilation Error :(

[hek]

Did you replace the whole MySensors-library folder?

[mitekg]

@hek Yes, MySensors-library was replaced

[Hoffan]

I did not :)

[mitekg]

@Hoffan compilation success?
Evrthing works?
IDE version

thx?

[Hoffan]

The Develepment Version looks like working Good for me

[mitekg]

thx! ill try today.
And what about IDE 1.0.5. or 1.5.7?

[Hoffan]

@mitekg

1.5.7

[mitekg]

1.5.7 + latest dev version
lib,,...\EthernetGateway.ino
Compilation, . error:

Arduino: 1.5.7 (Windows 7), Board: "Arduino Nano, ATmega328"

In file included from EthernetGateway.ino:57:0:
GatewayUtil.h: In function 'void parseAndSend(MySensor, char*)':
GatewayUtil.h:187:31: error: 'mSetRequestAck' was not declared in this scope
mSetRequestAck(msg,ack?1:0);
^
In file included from EthernetGateway.ino:53:0:
C:\Users\Dima\Documents\Arduino\libraries\MySensors/MySensor.h:248:10: error: 'boolean MySensor::sendRoute(MyMessage&)' is protected
boolean sendRoute(MyMessage &message);
^
In file included from EthernetGateway.ino:57:0:
GatewayUtil.h:193:26: error: within this context
ok = gw.sendRoute(msg);
^

This report would have more information with
"Show verbose output during compilation"
enabled in File > Preferences.

[hek]

@mitekg

You don't seem to have updated everything (in the library folder) or forgot to restart Arduino IDE afterwards.

[mitekg]

@hek
test it twice!
clean installation (unpack in new dir) of 1.5.6. + latest dev version from git.

[mitekg]

This post is deleted!

[mitekg]

@hek
sorry!!
Im stupid man! compiled :+1:
Continue testing!

[mitekg]

@hek , @Hoffan everything is work properly on master version!
thank to ALL!

[jmmorgan]

I have a similar problem. I upgraded from 1.3 to 1.4 and my Wiznet gateway does not work. I can ping version 1.3 from my PC and it see the gateway. When I ping 1.4 from my PC it says that the destination address can not be found. I have downloaded the latest Ethernet gateway sketch, but it did not help. Has any other file change that could effect this.
Thanks
John