MYSBootloader 1.3
-
Did any one able to make this work with atmega328P-PU 28 DIP 8MHz internal clock? or is it just me having problems with this boot loader?
I was able to load the boot loader successfully and able to upload a sketch but then nothing happen, i see nothing in the serial port (default 115200) and the gateway does not find any node.
I am using latest dev branch of 2.0 and the boot loader from the above thread link.
Just for compression i loaded another boot loader for 8MHz internal clock (Arduino on breadboard) and uploaded a sketch to it and it worked perfectly communicating with the gateway etc.
I want to be able to upload OTA.
Am i doing something wrong? does this boot loader even supports this MCU?
-
Something new about OTA and MySensors 2.1.1 with atmega328P-PU 28 DIP 8MHz internal clock?
//Mattias
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login