MySensors plugin : Choose the Serial Port
-
Hi,
Running a serial gateway with nano. (original nano, not knock off version)
Every time there is a power failure, after start up I get this message:
MySensors plugin : Choose the Serial Port
MySensors Plugin[3575] : Running Lua StartupThe options for the serial gateway setup are not present. I need to go into my roof and unplug my serial gateway and plug it back into my Vera. Once it I do I can see the options for the set up and everything works fine. The other day I hit the reboot button on the nano and this did not seem to do the trick. I will need to confirm about that.
Has anyone had this problem?
-
Hi,
Running a serial gateway with nano. (original nano, not knock off version)
Every time there is a power failure, after start up I get this message:
MySensors plugin : Choose the Serial Port
MySensors Plugin[3575] : Running Lua StartupThe options for the serial gateway setup are not present. I need to go into my roof and unplug my serial gateway and plug it back into my Vera. Once it I do I can see the options for the set up and everything works fine. The other day I hit the reboot button on the nano and this did not seem to do the trick. I will need to confirm about that.
Has anyone had this problem?
-
@dpancer said:
MySensors plugin : Choose the Serial Port
MySensors Plugin[3575] : Running Lua StartupThis message is coming from Vera?
If yes, then I think the problem is in Vera.
@flopp said:
This message is coming from Vera?
If yes, then I think the problem is in Vera.
yes this message is coming from vera. Now, how can I solve this? I'm sure someone running the same setup can chime in. This must have happened to other people before.
Maybe adding a reboot every 6 hours in the arduino gateway sketch? Or is there a vera specific fix that might work?
-
Yes, there have been reports of Vera re-numerating the usb-serial devices at reboot, which is very annoying.
I use a usb hub and it always pops up again after reboot. The only time have problems, is if I leave the gateway unplugged during reboot. Then I have to reconfigure it again.
-
If it's a standard arduino (with 328p)then resetting won't have an effect, as the USB controller is external and won't reset/re-enumerate
If it's a 32u4, or atsam micro (with build in USB controller) then it will re-enumerate as you will be resetting the USB controller as well..
-
Yes, there have been reports of Vera re-numerating the usb-serial devices at reboot, which is very annoying.
I use a usb hub and it always pops up again after reboot. The only time have problems, is if I leave the gateway unplugged during reboot. Then I have to reconfigure it again.
@hek said in MySensors plugin : Choose the Serial Port:
Yes, there have been reports of Vera re-numerating the usb-serial devices at reboot, which is very annoying.
I use a usb hub and it always pops up again after reboot. The only time have problems, is if I leave the gateway unplugged during reboot. Then I have to reconfigure it again.
Its been quite some time since this issue has been discussed. Has there been any updates which can solve this re-numerating problem at reboot?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login