💬 Sensebender Micro mk2
-
Currently I have the first prototype pcbs without components, so need to make an order at mouser/digikey. This has been on my task list for the last couple of months though, as wife / kids have a lot of other projects for me during the summer time :)
-
Currently I have the first prototype pcbs without components, so need to make an order at mouser/digikey. This has been on my task list for the last couple of months though, as wife / kids have a lot of other projects for me during the summer time :)
-
MySensors is already ported to samd21 so I expect things to be minor in order to get it up and running on samd20.
I will probably change footprint for the rfm69 module to use one that is compatible with rfm95 as well. And some other minor changes as well
-
A small update on this project, which I admit is taking longer than it should be (A lot of other projects has higher priority according to the wife)
I finally got the first prototype assembled saturday evening, I can upload firmware (via jtag/swd), and I have a semi hacked arduino core, that can build. But when programming the samd20e with this core, and a simple sketch toggling an output pin, nothing happens.
It seems that arduino halts in its initialization routine, waiting for some hardware to become ready after a reset, however I have not identified which part of the hardware yet.
-
A small update on this project, which I admit is taking longer than it should be (A lot of other projects has higher priority according to the wife)
I finally got the first prototype assembled saturday evening, I can upload firmware (via jtag/swd), and I have a semi hacked arduino core, that can build. But when programming the samd20e with this core, and a simple sketch toggling an output pin, nothing happens.
It seems that arduino halts in its initialization routine, waiting for some hardware to become ready after a reset, however I have not identified which part of the hardware yet.
-
Sorry, I got caught up in a couple of other projects, so still haven't got the first prototype up and run nok :(
-
@tbowmo said in 💬 Sensebender Micro mk2:
so still haven't got the first prototype up and run nok :(
Any luck with that at all? I really like they way the node is very small and with SAMD21
-
@alexsh1 bugger, I knew there where something that I had to do. The wife says that I have to finish the chicken coop automation first (opening / closing gates etc.).
