💬 Sensebender Micro mk2
-
Currently I have the first prototype pcbs without components, so need to make an order at mouser/digikey. This has been on my task list for the last couple of months though, as wife / kids have a lot of other projects for me during the summer time :)
-
Currently I have the first prototype pcbs without components, so need to make an order at mouser/digikey. This has been on my task list for the last couple of months though, as wife / kids have a lot of other projects for me during the summer time :)
-
MySensors is already ported to samd21 so I expect things to be minor in order to get it up and running on samd20.
I will probably change footprint for the rfm69 module to use one that is compatible with rfm95 as well. And some other minor changes as well
-
A small update on this project, which I admit is taking longer than it should be (A lot of other projects has higher priority according to the wife)
I finally got the first prototype assembled saturday evening, I can upload firmware (via jtag/swd), and I have a semi hacked arduino core, that can build. But when programming the samd20e with this core, and a simple sketch toggling an output pin, nothing happens.
It seems that arduino halts in its initialization routine, waiting for some hardware to become ready after a reset, however I have not identified which part of the hardware yet.
-
A small update on this project, which I admit is taking longer than it should be (A lot of other projects has higher priority according to the wife)
I finally got the first prototype assembled saturday evening, I can upload firmware (via jtag/swd), and I have a semi hacked arduino core, that can build. But when programming the samd20e with this core, and a simple sketch toggling an output pin, nothing happens.
It seems that arduino halts in its initialization routine, waiting for some hardware to become ready after a reset, however I have not identified which part of the hardware yet.
-
Sorry, I got caught up in a couple of other projects, so still haven't got the first prototype up and run nok :(
-
@tbowmo said in 💬 Sensebender Micro mk2:
so still haven't got the first prototype up and run nok :(
Any luck with that at all? I really like they way the node is very small and with SAMD21
-
@alexsh1 bugger, I knew there where something that I had to do. The wife says that I have to finish the chicken coop automation first (opening / closing gates etc.).
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login