Need a bid of help...

[gohan]

Take a look at nodemanager, it will simplify your life ☺️

[Rene046]

@gohan

Hi Gohan.

Im still learning .. nodemanager ????

Features

Manage all the aspects of a sleeping cycle by leveraging smart sleep
Allow configuring the sleep mode and the sleep duration remotely
Allow waking up a sleeping node remotely at the end of a sleeping cycle
Allow powering on each connected sensor only while the node is awake to save battery
Report battery level periodically and automatically
Calculate battery level without requiring an additional pin and the resistors
Report battery voltage through a built-in sensor
Can report battery level on demand
Allow rebooting the board remotely
Provide out-of-the-box sensors personalities and automatically execute their main task at each cycle

it looks intresting but i just started...

[gohan]

For beginners it's easier, it cuts down code quite a lot

[Rene046]

@gohan

Do you have a sample or could you help me starting with the sketch i already have ?

[Rene046]

@Rene046 said in Need a bid of help...:

@gohan

Do you have a sample or could you help me starting with the sketch i already have ?

i installed nodemanager i think ...lol

[Rene046]

This post is deleted!

[gohan]

maybe you set the something wrong in the sleep settings, but without seeing your code it's hard to give you an answer :)

[Rene046]

Found it i connected the BME280 in the BH1750 line after removing i worked again....
the sketch could not work without Seeing the BH1750.

my code is in my first post on top of this topic.

[gohan]

Yes, but I wanted to see if you made the modifications to run the nodemanager

[Rene046]

nope i dont even know where to start....

[alowhum]

Try this code:
https://github.com/flatsiedatsie/MySensorsArduinoExamples/blob/5c84100098352bab6db4b9c86e76db79842131ec/examples/WeatherStationSensor/WeatherStationSensor.ino