Domoticz TEXT sensor triggering

Sushukka

Here is the latest update:
https://github.com/domoticz/domoticz/issues/2380
At least got some response...do it yourself.
Darn sad: a good, reliable and widely-used product, but the developers are just pricks or don't give shit. With better attitude this could be so much more and most likely there would be lots of more contributors helping with them.

gohan

Agreed, that is bad but on the other side consider it is a feature not used much actually.

Nca78

@gohan said in Domoticz TEXT sensor triggering:

Agreed, that is bad but on the other side consider it is a feature not used much actually.

Well I don't use it at the moment, but only because it's a PITA with Domoticz...

GertSanders

@gohan I would love to have that feature so I can send updates to a LCD equipped sensor, without the "switch" hack.
Polling is really inefficient, one should be able to send V_TEXT just like V_STATUS.

gohan

Don't get me wrong, I understand, I was just considering that it a feature not needed by many people and it is still on the feature request list

alowhum

I built a partial solution for this in the Aurora theme for Domoticz. With it you can just change the vText variable value in the interface.

Install Aurora
Go to Utility tab
click on the text value. It will change into an edit field. Click outside of it when you're done.

The node still needs to poll Domoticz periodically to request the new value. But at least you can change the value easily this way.

Sushukka

YEEEEEEESSSSHHH!!! This is now implemented in Domoticz!
https://github.com/domoticz/domoticz/issues/2380

You can change the V_TEXT sensor value from Domoticz via JSON, Scripts and Blocky and the update will be sent directly to the node without any hacks!!! This is big update; you can pass lots of information, parameters etc directly to the nodes without extra steps. And @alowhum you don't need that poll anymore in the sketch. :) LCD screen updates, speech-to-text commands...now we just need bigger payload size for MySensors... :D

alexsh1

@gertsanders said in Domoticz TEXT sensor triggering:

@gohan I would love to have that feature so I can send updates to a LCD equipped sensor, without the "switch" hack.
Polling is really inefficient, one should be able to send V_TEXT just like V_STATUS.

you ca do it now with the latest update

alowhum

What other things are bi-directional with Domoticz?

Fo example I'm looking to receive a setpoint value from Domoticz for a node that is an oven controller. Dresenting a s_hvac and then setting a new temperature in Domoticz, does that automatically get sent back to a node? Or is there a setpoint something?

tbowmo

@alowhum

If I remember right, then domoticz sends the new temperature to the device, but only updates the gui when it receives a value from the node. So your node sketch have to reply the set command from your controller, with another set command, which sends the value back to your controller.

gohan

@alowhum those kind of values should be sent automatically to the node if they are changed in domoticz

kimot

@alowhum

bool MySensorsBase::WriteToHardware(const char *pdata, const unsigned char length)
{
	const tRBUF *pCmd = reinterpret_cast<const tRBUF *>(pdata);
	unsigned char packettype = pCmd->ICMND.packettype;
	unsigned char subtype = pCmd->ICMND.subtype;

	if (packettype == pTypeLighting2)
	{
		//Light command

		int node_id = pCmd->LIGHTING2.id4;
		int child_sensor_id = pCmd->LIGHTING2.unitcode;

		if (_tMySensorNode *pNode = FindNode(node_id))
		{
			_tMySensorChild *pChild = pNode->FindChild(child_sensor_id);
			if (!pChild)
			{
				_log.Log(LOG_ERROR, "MySensors: Light command received for unknown node_id: %d, child_id: %d", node_id, child_sensor_id);
				return false;
			}

			int light_command = pCmd->LIGHTING2.cmnd;
			if ((pCmd->LIGHTING2.cmnd == light2_sSetLevel) && (pCmd->LIGHTING2.level == 0))
			{
				light_command = light2_sOff;
			}
			else if ((pCmd->LIGHTING2.cmnd == light2_sSetLevel) && (pCmd->LIGHTING2.level == 255))
			{
				light_command = light2_sOn;
			}

			if ((light_command == light2_sOn) || (light_command == light2_sOff))
			{
				std::string lState = (light_command == light2_sOn) ? "1" : "0";
				if (pChild->presType == S_LOCK)
				{
					//Door lock/contact
					return SendNodeSetCommand(node_id, child_sensor_id, MT_Set, V_LOCK_STATUS, lState, pChild->useAck, pChild->ackTimeout);
				}
				else if (pChild->presType == S_SCENE_CONTROLLER)
				{
					//Scene Controller
					return SendNodeSetCommand(node_id, child_sensor_id, MT_Set, (light_command == light2_sOn) ? V_SCENE_ON : V_SCENE_OFF, lState, pChild->useAck, pChild->ackTimeout);
				}
				else
				{
					//normal
					return SendNodeSetCommand(node_id, child_sensor_id, MT_Set, V_STATUS, lState, pChild->useAck, pChild->ackTimeout);
				}
			}
			else if (light_command == light2_sSetLevel)
			{
				float fvalue = (100.0f / 14.0f)*float(pCmd->LIGHTING2.level);
				if (fvalue > 100.0f)
					fvalue = 100.0f; //99 is fully on
				int svalue = round(fvalue);

				std::stringstream sstr;
				sstr << svalue;
				return SendNodeSetCommand(node_id, child_sensor_id, MT_Set, V_PERCENTAGE, sstr.str(), pChild->useAck, pChild->ackTimeout);
			}
		}
		else {
			_log.Log(LOG_ERROR, "MySensors: Light command received for unknown node_id: %d", node_id);
			return false;
		}
	}
	else if (packettype == pTypeLimitlessLights)
	{
		//RGW/RGBW command
		_tLimitlessLights *pLed = (_tLimitlessLights *)pdata;
		//unsigned char ID1 = (unsigned char)((pLed->id & 0xFF000000) >> 24);
		//unsigned char ID2 = (unsigned char)((pLed->id & 0x00FF0000) >> 16);
		unsigned char ID3 = (unsigned char)((pLed->id & 0x0000FF00) >> 8);
		unsigned char ID4 = (unsigned char)pLed->id & 0x000000FF;

		int node_id = (ID3 << 8) | ID4;
		int child_sensor_id = pLed->dunit;

		if (_tMySensorNode *pNode = FindNode(node_id))
		{
			_tMySensorChild *pChild = pNode->FindChild(child_sensor_id);
			if (!pChild)
			{
				_log.Log(LOG_ERROR, "MySensors: Light command received for unknown node_id: %d, child_id: %d", node_id, child_sensor_id);
				return false;
			}

			bool bIsRGBW = (pNode->FindChildWithPresentationType(child_sensor_id, S_RGBW_LIGHT) != NULL);
			if (pLed->command == Limitless_SetRGBColour)
			{
				int red, green, blue;

				float cHue = (360.0f / 255.0f)*float(pLed->value);//hue given was in range of 0-255
				int Brightness = 100;
				int dMax = round((255.0f / 100.0f)*float(Brightness));
				hue2rgb(cHue, red, green, blue, dMax);
				std::stringstream sstr;
				sstr << std::setw(2) << std::uppercase << std::hex << std::setfill('0') << std::hex << red
					<< std::setw(2) << std::uppercase << std::hex << std::setfill('0') << std::hex << green
					<< std::setw(2) << std::uppercase << std::hex << std::setfill('0') << std::hex << blue;
				return SendNodeSetCommand(node_id, child_sensor_id, MT_Set, (bIsRGBW == true) ? V_RGBW : V_RGB, sstr.str(), pChild->useAck, pChild->ackTimeout);
			}
			else if (pLed->command == Limitless_SetColorToWhite)
			{
				std::stringstream sstr;
				int Brightness = 100;
				int wWhite = round((255.0f / 100.0f)*float(Brightness));
				if (!bIsRGBW)
				{
					sstr << std::setw(2) << std::uppercase << std::hex << std::setfill('0') << std::hex << wWhite
						<< std::setw(2) << std::uppercase << std::hex << std::setfill('0') << std::hex << wWhite
						<< std::setw(2) << std::uppercase << std::hex << std::setfill('0') << std::hex << wWhite;
				}
				else
				{
					sstr << "#000000"
						<< std::setw(2) << std::uppercase << std::hex << std::setfill('0') << std::hex << wWhite;
				}
				return SendNodeSetCommand(node_id, child_sensor_id, MT_Set, (bIsRGBW == true) ? V_RGBW : V_RGB, sstr.str(), pChild->useAck, pChild->ackTimeout);
			}
			else if (pLed->command == Limitless_SetBrightnessLevel)
			{
				float fvalue = pLed->value;
				int svalue = round(fvalue);
				if (svalue > 100)
					svalue = 100;
				std::stringstream sstr;
				sstr << svalue;
				return SendNodeSetCommand(node_id, child_sensor_id, MT_Set, V_PERCENTAGE, sstr.str(), pChild->useAck, pChild->ackTimeout);
			}
			else if ((pLed->command == Limitless_LedOff) || (pLed->command == Limitless_LedOn))
			{
				std::string lState = (pLed->command == Limitless_LedOn) ? "1" : "0";
				return SendNodeSetCommand(node_id, child_sensor_id, MT_Set, V_STATUS, lState, pChild->useAck, pChild->ackTimeout);
			}
		}
		else
		{
			_log.Log(LOG_ERROR, "MySensors: Light command received for unknown node_id: %d", node_id);
			return false;
		}
	}
	else if (packettype == pTypeBlinds)
	{
		//Blinds/Window command
		int node_id = pCmd->BLINDS1.id3;
		int child_sensor_id = pCmd->BLINDS1.unitcode;

		if (_tMySensorNode *pNode = FindNode(node_id))
		{
			_tMySensorChild *pChild = pNode->FindChild(child_sensor_id);
			if (!pChild)
			{
				_log.Log(LOG_ERROR, "MySensors: Light command received for unknown node_id: %d, child_id: %d", node_id, child_sensor_id);
				return false;
			}

			if (pCmd->BLINDS1.cmnd == blinds_sOpen)
			{
				return SendNodeSetCommand(node_id, child_sensor_id, MT_Set, V_UP, "", pChild->useAck, pChild->ackTimeout);
			}
			else if (pCmd->BLINDS1.cmnd == blinds_sClose)
			{
				return SendNodeSetCommand(node_id, child_sensor_id, MT_Set, V_DOWN, "", pChild->useAck, pChild->ackTimeout);
			}
			else if (pCmd->BLINDS1.cmnd == blinds_sStop)
			{
				return SendNodeSetCommand(node_id, child_sensor_id, MT_Set, V_STOP, "", pChild->useAck, pChild->ackTimeout);
			}
		}
		else {
			_log.Log(LOG_ERROR, "MySensors: Blinds/Window command received for unknown node_id: %d", node_id);
			return false;
		}
	}
	else if ((packettype == pTypeThermostat) && (subtype == sTypeThermSetpoint))
	{
		//Set Point
		const _tThermostat *pMeter = reinterpret_cast<const _tThermostat *>(pCmd);

		int node_id = pMeter->id2;
		int child_sensor_id = pMeter->id3;
		_eSetType vtype_id = (_eSetType)pMeter->id4;

		if (_tMySensorNode *pNode = FindNode(node_id))
		{
			_tMySensorChild *pChild = pNode->FindChild(child_sensor_id);
			if (!pChild)
			{
				_log.Log(LOG_ERROR, "MySensors: Light command received for unknown node_id: %d, child_id: %d", node_id, child_sensor_id);
				return false;
			}

			char szTmp[10];
			sprintf(szTmp, "%.1f", pMeter->temp);
			return SendNodeSetCommand(node_id, child_sensor_id, MT_Set, vtype_id, szTmp, pChild->useAck, pChild->ackTimeout);
		}
		else {
			_log.Log(LOG_ERROR, "MySensors: Blinds/Window command received for unknown node_id: %d", node_id);
			return false;
		}
	}
	else if (packettype == pTypeGeneralSwitch)
	{
		//Used to store IR codes
		const _tGeneralSwitch *pSwitch= reinterpret_cast<const _tGeneralSwitch *>(pCmd);

		int node_id = pSwitch->unitcode;
		unsigned int ir_code = pSwitch->id;

		if (_tMySensorNode *pNode = FindNode(node_id))
		{
			_tMySensorChild* pChild = pNode->FindChildByValueType(V_IR_RECEIVE);
			if (pChild)
			{
				std::stringstream sstr;
				sstr << ir_code;
				return SendNodeSetCommand(node_id, pChild->childID, MT_Set, V_IR_SEND, sstr.str(), pChild->useAck, pChild->ackTimeout);
			}
		}
		else {
			_log.Log(LOG_ERROR, "MySensors: Blinds/Window command received for unknown node_id: %d", node_id);
			return false;
		}
	}
	else
	{
		_log.Log(LOG_ERROR, "MySensors: Unknown action received");
		return false;
	}
	return true;
}```

alowhum

@kimot : Thanks! If I'm reading that domoticz code correctly:

All kinds of switches, including percentage and V_IR_RECEIVE
"sTypeThermSetpoint"
Hmm, I don't see the V_text update in that code

@tbowmo : I had discovered that by experimenting, good to see it confirmed by you too.

kimot

@alowhum
There are some changes in V_TEXT type in latest builds.
Read this:
https://forum.mysensors.org/topic/9340/domoticz-v_text-sensor-now-bidirectional

Domoticz TEXT sensor triggering

24

11.7k

11.2k

113.1k