Forgive me, I did not mean to offend anyone. I am so sorry. I promise to practice my English

Forgive me, I did not mean to offend anyone. I am so sorry. I promise to practice my English

hi...look it work to me now with this skech
https://forum.mysensors.org/topic/775/8-lamp-outlet-smart-plug-module

find parent
send: 19-19-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,st=bc:
read: 11-11-19 s=255,c=3,t=8,pt=1,l=1,sg=0:1
parent=11, d=2
read: 0-0-19 s=255,c=3,t=8,pt=1,l=1,sg=0:0
parent=0, d=1
send: 19-19-0-0 s=255,c=3,t=15,pt=2,l=2,sg=0,st=ok:0
send: 19-19-0-0 s=255,c=0,t=17,pt=0,l=5,sg=0,st=ok:1.5.4
send: 19-19-0-0 s=255,c=3,t=6,pt=1,l=1,sg=0,st=ok:0
sensor started, id=19, parent=0, distance=1
send: 19-19-0-0 s=255,c=3,t=11,pt=0,l=12,sg=0,st=ok:Relay Outlet
send: 19-19-0-0 s=255,c=3,t=12,pt=0,l=3,sg=0,st=ok:1.0
send: 19-19-0-0 s=0,c=0,t=3,pt=0,l=0,sg=0,st=ok:
send: 19-19-0-0 s=255,c=3,t=15,pt=2,l=2,sg=0,st=ok:0
send: 19-19-0-0 s=255,c=0,t=17,pt=0,l=5,sg=0,st=ok:1.5.4
send: 19-19-0-0 s=255,c=3,t=6,pt=1,l=1,sg=0,st=ok:0
sensor started, id=19, parent=0, distance=1
send: 19-19-0-0 s=255,c=3,t=11,pt=0,l=12,sg=0,st=ok:Relay Outlet
send: 19-19-0-0 s=255,c=3,t=12,pt=0,l=3,sg=0,st=ok:1.0
send: 19-19-0-0 s=0,c=0,t=3,pt=0,l=0,sg=0,st=ok:

and with libraries version 1.5.4, do you know why? what is the difference?
I see de differences in the code but i dont understand
And for more information im use de Git Repo for UI7 on my vera edge
I do not mind using an old version of the libraries, but what I was interested in was the code of a relay with button actuator.

And one more time...thank you for your help and interest

Buenas...hay alguien que hable español por aqui? soy nuevo en esto y tengo un monton de dudas...el problema es que mi ingles no es muy bueno...si alguen que hable español me puede ayudar le estaria eternamente agradecido.

Gracias...thankss

Thanks for replying, this is what I get ... I do not understand anything. I'm still learning. Can you see a bug?

My gw has the latest version, and the latest libraries also.

Hi, can anyone tell me if with these components and this code should I see it in my vera?
I'm going crazy, because my other noods work well.

thanks guys

Components:
http://www.ebay.com/itm/130977189883?rmvSB=true
http://www.ebay.com/itm/400594940658?rmvSB=true
http://www.ebay.com/itm/261099571172?rmvSB=true

Code: https://github.com/mysensors/MySensorsArduinoExamples/blob/master/examples/RelayWithButtonActuator/RelayWithButtonActuator.ino

Hi guys...Can someone tell me if the second version should work with my sensors?

Version 1
http://www.ebay.com/itm/130977189883?rmvSB=true

Version 2
http://www.ebay.es/itm/201722913123?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

i have 2 sensors with the first version and works very well, but now i by the second version and my gw dont detect my sensors.
Is there any difference

Hi guys. I have a problem with my serial gateway, i have it connected to my vera edge by usb but if i disconnect it, or i turn off my vera it loses the configurations and sometimes I have to pair all my sensors. Has anyone had this problem or know how to fix it?

I would greatly appreciate it. I like your project.

Thanks for your help.

Hello. Thanks for reply.

This is my first project witn arduino. I'm learning. xD
For this project i have:

• the vera edge;
• arduino uno;
• NRF24L01+ 2.4GHz Wireless Transceiver;
• Relays;

So my question is. It's possible wiht this components? I need another?

You say: (All of these builds are well documented on the Mysensor website.) - can you please send me de link? because i can't found.

Thank you.

Hello I would like to make the following project:

Control lights and intencidad with Vera and arduino. On, off and control its intencidad . It will be possible?
Can you help me with components and code?

Thanks guys.

Forgive my English , I'm using google translate .