Topics created by ArduiSens

This can maybe a solution for having a bridge between RS485 and nRF24L01.

@mfalkvidd OK, the before() works! 0 MCO:BGN:INIT NODE,CP=RSNNA--,VER=2.1.1 3 MCO:BGN:BFR running before() function 2006 TSM:INIT 2011 TSF:WUR:MS=0 2012 TSM:INIT:TSP OK 2014 TSM:INIT:STATID=25 2016 TSF:SID:OK,ID=25 2018 TSM:FPAR 2036 TSF:MSG:SEND,25-25-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 2850 TSF:MSG:READ,0-0-25,s=255,c=3,t=8,pt=1,l=1,sg=0:0 2855 TSF:MSG:FPAR OK,ID=0,D=1 4043 TSM:FPAR:OK thanks for the cooperation mfalkvidd & rejoe2

@ArduiSens I have an uno with w5100 Ethernet shield connecting to Domoticz running on my Synology . So it should work for you too. Have a look at this post and see if the information there helps. If not post your sketch and we may be able to find the problem

Hello, I have had some other problems too, one of them was the reconnections-after-30-sec problem with Domotics (via Synology). To solve this I have compiled my UNO (with ethernet shield at top) 2 minutes ago and now I have full contact with Domotics (on Synology NAS). Start playing now ... thanks for the inspiration!