Topics created by jlb

@jlb said in Radio stops working: How to make the node detect this radio problem ? I don't think there is a function to do this, but maybe someone else can help with that. How do I get my sketch to do a cold restart of the radio ? It would be good to see how you wired this all up - a hand drawn sketch or fritzing would do. I suspect that by modifying the way power is applied may need arjusting and come capacitors may need adding - You can reboot by using a hardware watchdog circuit (web search for it).

Hi, The strange behavior is no longer present and I can't replicate the problem. I suspect there was a general communication problem with the gateway. Anyway, please see the following debug prints. __ __ ____ | \/ |_ _/ ___| ___ _ __ ___ ___ _ __ ___ | |\/| | | | \___ \ / _ \ `_ \/ __|/ _ \| `__/ __| | | | | |_| |___| | __/ | | \__ \ _ | | \__ \ |_| |_|\__, |____/ \___|_| |_|___/\___/|_| |___/ |___/ 2.3.2 16 MCO:BGN:INIT NODE,CP=RNNNA-Q-,FQ=16,REL=255,VER=2.3.2 26 TSM:INIT 28 TSF:WUR:MS=0 34 TSM:INIT:TSP OK 36 TSF:SID:OK,ID=1 38 TSM:FPAR 41 ?TSF:MSG:SEND,1-1-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: 247 TSF:MSG:READ,0-0-1,s=255,c=3,t=8,pt=1,l=1,sg=0:0 252 TSF:MSG:FPAR OK,ID=0,D=1 2050 TSM:FPAR:OK 2051 TSM:ID 2052 TSM:ID:OK 2054 TSM:UPL 2057 TSF:MSG:SEND,1-1-0-0,s=255,c=3,t=24,pt=1,l=1,sg=0,ft=0,st=OK:1 2068 TSF:MSG:READ,0-0-1,s=255,c=3,t=25,pt=1,l=1,sg=0:1 2073 TSF:MSG:PONG RECV,HP=1 2075 TSM:UPL:OK 2077 TSM:READY:ID=1,PAR=0,DIS=1 2081 TSF:MSG:SEND,1-1-0-0,s=255,c=3,t=15,pt=6,l=2,sg=0,ft=0,st=OK:0100 2100 TSF:MSG:READ,0-0-1,s=255,c=3,t=15,pt=6,l=2,sg=0:0100 2110 TSF:MSG:SEND,1-1-0-0,s=255,c=0,t=17,pt=0,l=5,sg=0,ft=0,st=OK:2.3.2 2118 TSF:MSG:SEND,1-1-0-0,s=255,c=3,t=6,pt=1,l=1,sg=0,ft=0,st=OK:0 2179 TSF:MSG:READ,0-0-1,s=255,c=3,t=6,pt=0,l=1,sg=0:M 2186 TSF:MSG:SEND,1-1-0-0,s=255,c=3,t=11,pt=0,l=18,sg=0,ft=0,st=OK:Stairs Wall Lights 2198 TSF:MSG:SEND,1-1-0-0,s=255,c=3,t=12,pt=0,l=3,sg=0,ft=0,st=OK:1.2 2209 TSF:MSG:SEND,1-1-0-0,s=0,c=0,t=4,pt=0,l=10,sg=0,ft=0,st=OK:Top_Lights 2318 TSF:MSG:SEND,1-1-0-0,s=1,c=0,t=4,pt=0,l=13,sg=0,ft=0,st=OK:Bottom_Lights 2427 TSF:MSG:SEND,1-1-0-0,s=2,c=0,t=3,pt=0,l=17,sg=0,ft=0,st=OK:Top_Lights_Switch 2537 TSF:MSG:SEND,1-1-0-0,s=3,c=0,t=3,pt=0,l=20,sg=0,ft=0,st=OK:Bottom_Lights_Switch 2648 TSF:MSG:SEND,1-1-0-0,s=4,c=0,t=23,pt=0,l=23,sg=0,ft=0,st=OK:Top_Lights_Switch_Level 2758 TSF:MSG:SEND,1-1-0-0,s=5,c=0,t=23,pt=0,l=25,sg=0,ft=0,st=OK:Bottom_Lights_Switch_Leve 2866 MCO:REG:REQ 2871 TSF:MSG:SEND,1-1-0-0,s=255,c=3,t=26,pt=1,l=1,sg=0,ft=0,st=OK:2 2877 TSF:MSG:READ,0-0-1,s=255,c=3,t=27,pt=1,l=1,sg=0:1 2882 MCO:PIM:NODE REG=1 2884 MCO:BGN:STP Setup Started. 2888 TSF:MSG:SEND,1-1-0-0,s=2,c=1,t=2,pt=1,l=1,sg=0,ft=0,st=OK:0 2995 TSF:MSG:SEND,1-1-0-0,s=3,c=1,t=2,pt=1,l=1,sg=0,ft=0,st=OK:0 Top Switch level: 100 3103 TSF:MSG:SEND,1-1-0-0,s=4,c=1,t=24,pt=1,l=1,sg=0,ft=0,st=OK:100 Bottom Switch level: 100 3211 TSF:MSG:SEND,1-1-0-0,s=5,c=1,t=24,pt=1,l=1,sg=0,ft=0,st=OK:100 3318 TSF:MSG:SEND,1-1-0-0,s=0,c=2,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 3364 TSF:MSG:READ,0-0-1,s=0,c=1,t=3,pt=0,l=1,sg=0:0 V_Dimmer received: 0 Fade to Level: 0:0-->0 3425 TSF:MSG:SEND,1-1-0-0,s=1,c=2,t=3,pt=0,l=0,sg=0,ft=0,st=OK: 3469 TSF:MSG:READ,0-0-1,s=1,c=1,t=3,pt=0,l=1,sg=0:0 V_Dimmer received: 1 Fade to Level: 1:0-->0 Setup Colplete. 3531 MCO:BGN:INIT OK,TSP=1 Switch 1 pressed. 11350 TSF:MSG:SEND,1-1-0-0,s=2,c=1,t=2,pt=1,l=1,sg=0,ft=0,st=OK:1 Fade to Level: 0:0-->100 Sensor Update received: 0 12360 TSF:MSG:SEND,1-1-0-0,s=0,c=1,t=2,pt=1,l=1,sg=0,ft=0,st=OK:1 12466 TSF:MSG:SEND,1-1-0-0,s=0,c=1,t=3,pt=1,l=1,sg=0,ft=0,st=OK:100 Switch 1 pressed. 14713 TSF:MSG:SEND,1-1-0-0,s=2,c=1,t=2,pt=1,l=1,sg=0,ft=0,st=OK:0 Fade to Level: 0:100-->0 Sensor Update received: 0 15726 TSF:MSG:SEND,1-1-0-0,s=0,c=1,t=2,pt=1,l=1,sg=0,ft=0,st=OK:0 15832 TSF:MSG:SEND,1-1-0-0,s=0,c=1,t=3,pt=1,l=1,sg=0,ft=0,st=OK:0 Thanks

Thanks I will try