Tried that, still having problems. Syslog says a lot of: "mysgw: Client 0: 0:0:3:0:18:PING with an occasional "rsyslogd-2007: action 'action 17' suspended, which is probanly about the log being spammed by MySensors. It uses a 3.3v stabiliser board. Tried different power levels in settings (usually use low power because it works better for the cheap Chinese knock-offs) Tried external 5v power supply. My nodes are saying 'FPAR: NO REPLY'

@hek Thank you, you are absolutely correct! I found a description on how to edit the SQLite table to remove old values Now I think I am up and running :relaxed:

Hi I had the same problem, try https instead of http, add the security exception and it should work Regards

Hi ! I've same problem to make a node with 2 DS18B20 and 2 DHT22. In domoticz the DS18B20 sensors are show with humidity value (of the 1st DHT22) and the 2nd DHT22 show the humidity value of the 1st one... The sketch i'm using is here: https://forum.mysensors.org/topic/5222/node-with-ds18b20-and-dht22 (sorry for my bad english)