Topics created by raulandresmoch

Just use 2 of the 4 batteries you have, solder a wire extra on the battery holder and you have 3v. If I were you I'd buy some 3.3v pro mini and some LiFePo4 AA batteries that have the correct voltage for everything.

@raulandresmoch The 3D design is for the Easy Newbie PCB designed by @sundberg84. The board carries an arduino pro mini and the nRF24L01+ radio.

@mfalkvidd YES!!!! That was the problem!!!! Thank you so much!!!!

@raulandresmoch Intresting reading on accuracy & lifetime! of temp sensors. Conclusion: The SHT71 does seem to be generally superior to the DHT22. It is better made, at least as accurate, more precise and responds more quickly to change. It does of course also cost ten times as much. Reliability may justify the higher cost, but I have to be cautious because I have not had the Sensirion device as long as the others. Two of my six DH22 / AM2303 devices have failed. Life expectancy is around one to two years. After 18 months of continuous operation only one of my six DH22 / AM2303 devices (device E) is able to match the performance of my one SHT71. Of course it is possible that I got the one good SHT71, but I do not consider that likely. The DHT22 cer list itemtainly is better than DHT11 and easily justifies its``` extra cost. list item

@jkandasa said: https://192.168.6.220:8443 YES!!!!! That was the problem!!! Thanks already working I already added some sensors and its working Beautiful!!!!! Hope you keep developing and keep the good work!!!! Best regards