Yes, thx. same issue.

Yes, thx. same issue.

Anyone tried that?
i m getting error with dht.readSensor.

Arduino: 1.6.9 (Windows 7), Board: "Arduino/Genuino Uno"

WARNING: Category '' in library UIPEthernet is not valid. Setting to 'Uncategorized'
C:\Users\Usuario\Documents\Arduino\GW Serial 2.0\GwSerial.v.0.3\GwSerial.v.0.3.ino: In function 'void loop()':

GwSerial.v.0.3:198: error: no matching function for call to 'DHT::readSensor(bool)'

   dht.readSensor(true);

                      ^

C:\Users\Usuario\Documents\Arduino\GW Serial 2.0\GwSerial.v.0.3\GwSerial.v.0.3.ino:198:22: note: candidate is:

In file included from C:\Users\Usuario\Documents\Arduino\GW Serial 2.0\GwSerial.v.0.3\GwSerial.v.0.3.ino:38:0:

C:\Program Files (x86)\Arduino\libraries\DHT/DHT.h:83:8: note: void DHT::readSensor()

   void readSensor();

        ^

C:\Program Files (x86)\Arduino\libraries\DHT/DHT.h:83:8: note:   candidate expects 0 arguments, 1 provided

Multiple libraries were found for "DHT.h"
 Used: C:\Program Files (x86)\Arduino\libraries\DHT
 Not used: C:\Users\Usuario\Documents\Arduino\libraries\DHT_sensor_library
exit status 1
no matching function for call to 'DHT::readSensor(bool)'

@hek said:

The upcoming MySensors gateway runs on SAMD so I guess feather works.

Hi @hek , thx for the reply, any eta on this?
Regards.

Hi @scalz , can please help me out to get some feathers running? that would be really helpfull
Regards.

Hi Guys, any of you tried to use this hardware?
Its possible to run Mysensors using that?
Best regards.

not yet, but in some days i will get that running.
regards.

// Enable debug prints to serial monitor
#define MY_DEBUG 

// Enable and select radio type attached
#define MY_RADIO_NRF24
//#define MY_RADIO_RFM69

//Including nescessary libraries
#include <SPI.h>
#include <MySensors.h> 
#include <DHT.h>  
#define HUMIDITY 1
#define TEMPERATURE 2

#define HUMIDITY_SENSOR_DIGITAL_PIN 3
DHT dht;

float lastTempValue;
float lastHumValue;
boolean metric = true; 

unsigned long SLEEP_TIME = 30000; // Sleep time between reads (in milliseconds)(30 seconds)
#define MESSAGEWAIT 500

MyMessage msgHum(HUMIDITY, V_HUM);
MyMessage msgTemp(TEMPERATURE, V_TEMP);

void presentation()  {
  // Send the sketch version information to the gateway and Controller
  sendSketchInfo("XXXX", "XX");
  wait(MESSAGEWAIT);

  // Register all sensors to gateway (they will be created as child devices)
  present(HUMIDITY, S_HUM);
  wait(MESSAGEWAIT);
  present(TEMPERATURE, S_TEMP);
  wait(MESSAGEWAIT);
}

void setup() {
   dht.setup(HUMIDITY_SENSOR_DIGITAL_PIN);
}

void loop() {
            delay(dht.getMinimumSamplingPeriod());
            float temperature = dht.getTemperature();
            if (isnan(temperature)) {
                                    Serial.println("Failed reading temperature from DHT");
                                    } else if (temperature != lastTempValue) {
                                                                          send(msgTemp.set(temperature, 1));
                                                                          lastTempValue = temperature;
                                                                          Serial.print("Temp: ");
                                                                          Serial.println(temperature);
                                                                        }
            float humidity = dht.getHumidity();
             if (isnan(humidity)) {
                                  Serial.println("Failed reading humidity from DHT");
                                  } else if (humidity != lastHumValue) {
                                                                   send(msgHum.set(humidity, 1));
                                                                   lastHumValue = humidity;
                                                                   Serial.print("Hum: ");
                                                                   Serial.println(humidity);
                                                                  } 

            sleep(SLEEP_TIME);
           }

I think i get it, @tlpeter :

MyMessage msgHumSoil(SOILHUMDITY, V_LEVEL); 

void presentation()  {
  // Send the sketch version information to the gateway and Controller
  sendSketchInfo("Sensor POT", "1.1");
  wait(MESSAGEWAIT);

  // Register all sensors to gateway (they will be created as child devices)
  present(SOILHUMDITY, S_MOISTURE);

Hi @tlpeter , cna share one example?

Regards.

For the record, to send in %, next code:

 int soilValue = analogRead(ANALOG_INPUT_SOIL_SENSOR); 
  soilValue = constrain(soilValue, 420, 1023); 
  soil = map(soilValue, 420, 1023, 100, 0);
  if (soil != lastSoilValue) {
    send(msgHumSoil.set(soil)); // Send in percent
    lastSoilValue = soil;```

@TheoL thx for your feedback.