Announcements

must have been a freudian slip ;-)

@jopebe said in 💬 RFID Lock Sensor: Every change to "Sensor open" should be for only let`s say 3 seconds or another adjustable time and than fall back to Default = "Sensor Locked" . Time enough e.g. to open the door or s.e. Is there anybody who can give me some hints how to ad this features into the given sketch? Thank You in advance Jopebe Hello, i have the same problem. Does anyone have a solution? The relay should only put on for 3 seconds. Greeting Holger

Hi, Some time ago, I've updated RPi gateway on NF24 from 2.2 to 2.3 Now I see that OTA stopped working. I had to go back to version 2.2. On version 2.3 in log I see a lot of FFFFFFFFFFFFFFFFFF data and rebooting, over and over again. Did anyone have a similar problem?

https://www.thingiverse.com/make:468039

Oh, I see - By 'THIS' I mean this 'build' page and the build example herein.

@ricorico94 you’re correct. When the gateway is in server mode, multiple controllers can connect to the gateway if MY_GATEWAY_MAX_CLIENTS is defined to something larger than the default value of 1. However, things can become very confused if multiple controllers respond to the same message.

Great work!

I'm getting low readings. The voltage at the sensor was OK. So it had to be the calculation. In my opinion the conversion of the 1023 values into a voltage is missing which can then be calculated further. uint16_t uv = analogRead(UV_SENSOR_ANALOG_PIN);// Get UV value uv = (uv* (5 / 1023.0))*1000; if (uv>1170) { uv=1170; }

hi i am using Lora SX1276 as simple transmitter and receiver. is there any library for sending and receiving the data no gateway involved only simple data transmission and reception.

@jjk yes, by avoiding to use smartSleep: https://www.mysensors.org/apidocs/group__MySensorsCoregrp.html#gab5f84c4227e3478af4b6600d5e8d8b15

Thanks! Had to disable board outline mask as it sometimes messed up the rendering. Managed to extract dimension (and hopefully number of layers) from the gerbers which gets filled into the form.

Merry Christmas and a Happy New Year and as thank you I donated some money to you.

@hek Thanks a lot. Way better that way!

Awesome project, I wish I made something like this. (I actually wanted to make something like this when I was in school) Very clean and nice presentation and realization, with a lot of attention to details. All is very realistic, I can imagine that it took quite some time making it. Thanks for sharing the details!

@jamzm you could try sending a message using the forum chat. Except that, there isn't much to do but wait.

well, I guess the milage is quite a lot also for a Japanese :D

To make this sketch works, you need to define: #define MY_RF24_CE_PIN 17 and #define MY_RF24_CS_PIN 18 or it'll not work.

You could also try with domoticz it's quite simple to start with.

@LastSamurai yes. Just follow the instructions in the first post in this thread.

@Yveaux I wish i could come :)