MYSBoatloader burning confusion
-
I have watched the video and tried to follow along. here
My test board is a pro mini 3.3V 8Mhz
I can read the fuses with AVRDUDESS and I get
L FF
H DA
E FDThis does not seem to match with the recommended settings but there is no mention what to do on the video?
The text suggests burn other values.
I am guessing I have an external oscillator as I can see the crystal on the PCB? The instructions don't show settings for 8MHz external.Next I have copied over the necessary boards.txt information, but there are 2 options for 8MHZ. MYBL8 and MYSBLNRF.
Both show up in the arduino IDE as 8MHz RC in the boards/frequency section.
I dont't know which one to choose.Also if I want to to use a channel greater than 110, I need to compile the hex file.
Is there a guide on how this is done. I have searched but drawn a blank.Any guidance appreciated.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login