Home Assistant v 0.11.1 with switch support

martinhjelmare

Unfortunately, I've realized this is a bug caused by me. There will be a bugfix release soon, so I hope we can have a fix for this in there. Sorry for the inconvenience!

Right now the binary sensors are missing in the sensor platform. I think it's due to me planning to do a binary sensor platform, but then changing my mind, and posponing that. Again sorry!
:anguished:

mirko314

Alright then, I started to feel a bit dumb :D
If you need any help let me know!
Thank you for looking into the issue :+1:

martinhjelmare

@mirko314

Thanks for testing and reporting the problem. All feedback is very welcome and important, cause even though I try to test most scenarios, it's easy to miss something. In this case, though, I feel a bit embarrassed. :flushed:

I've submitted a tested pull request which fixes this, and it has already been merged. Hopefully the bugfix release will be live very soon.

martinhjelmare

Update: Bugfix release 0.11.1 is now out.

mirko314

Nice!
Thank you, I installed it, works like a charm!
Going to try a HA switch tomorrow!
Are 1-Wire Components like AM2301 Temp-Sensor already supported?

martinhjelmare

I'm not sure that the library provided with mysensors supports DHT21 (AM2301). The readme for DHT library only mentions "DHT11 and DHT22, AM2302, RHT03".

But I found this post, where the adafruit library is used together with mysensors:
http://forum.mysensors.org/topic/841/solar-powered-mini-weather-station/53

As long as you get your temp/hum sensors going with the correct library there shouldn't be a problem of presenting them as mysensors sensors to home assistant.

mirko314

Well I will look into, thank you!

I do not know if this is the right place for further problems, if not tell me.

I tried to remote control a relay today
I used the official sketch of MYS at https://github.com/mysensors/Arduino/blob/master/libraries/MySensors/examples/RelayActuator/RelayActuator.ino

Even though it Looks like they are properly connected, there is no switch appearing on HA-Dashboard.
Log of the Sensor-Arduino Running RelayActuator.ino:

send: 1-1-0-0 s=255,c=0,t=18,pt=0,l=5,sg=0,st=ok:1.5.1
send: 1-1-0-0 s=255,c=3,t=6,pt=1,l=1,sg=0,st=ok:0
read: 0-0-1 s=255,c=3,t=6,pt=0,l=1,sg=0:M
repeater started, id=1, parent=0, distance=1
send: 1-1-0-0 s=255,c=3,t=11,pt=0,l=5,sg=0,st=ok:Relay
send: 1-1-0-0 s=255,c=3,t=12,pt=0,l=3,sg=0,st=ok:1.0
send: 1-1-0-0 s=1,c=0,t=3,pt=0,l=0,sg=0,st=ok:

Log of HA:

INFO:mysensors.mysensors:/dev/ttyUSB0 is open...
INFO:mysensors.mysensors:Connected to /dev/ttyUSB0
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:gateway started, id=0, parent=0, distance=0
INFO:homeassistant.components.sensor:Updating sensor entities
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=255,c=0,t=18,pt=0,l=5,sg=0:1.5.1
INFO:homeassistant.components.mysensors:update sensor_update: node 1
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=255,c=3,t=6,pt=1,l=1,sg=0:0
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:send: 0-0-1-1 s=255,c=3,t=6,pt=0,l=1,sg=0,st=ok:M
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=255,c=3,t=11,pt=0,l=5,sg=0:Relay
INFO:homeassistant.components.mysensors:update sensor_update: node 1
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=255,c=3,t=12,pt=0,l=3,sg=0:1.0
INFO:homeassistant.components.mysensors:update sensor_update: node 1
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=1,c=0,t=3,pt=0,l=0,sg=0:
INFO:homeassistant.components.mysensors:update sensor_update: node 1
INFO:homeassistant.components.device_tracker.nmap_tracker:Scanning
INFO:homeassistant.components.device_tracker.nmap_tracker:No MAC address found for 192.168.2.111
INFO:homeassistant.components.device_tracker.nmap_tracker:nmap scan successful
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=255,c=0,t=18,pt=0,l=5,sg=0:1.5.1
INFO:homeassistant.components.mysensors:update sensor_update: node 1
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=255,c=3,t=6,pt=1,l=1,sg=0:0
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:send: 0-0-1-1 s=255,c=3,t=6,pt=0,l=1,sg=0,st=ok:M
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=255,c=3,t=11,pt=0,l=5,sg=0:Relay
INFO:homeassistant.components.mysensors:update sensor_update: node 1
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=255,c=3,t=12,pt=0,l=3,sg=0:1.0
INFO:homeassistant.components.mysensors:update sensor_update: node 1
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=1,c=0,t=3,pt=0,l=0,sg=0:
INFO:homeassistant.components.mysensors:update sensor_update: node 1```

mirko314

Sorry, I forgot to ask, is it implemented yet? :D
I just scrambled through the code at HA
https://github.com/balloob/home-assistant/blob/dev/homeassistant/components/switch/mysensors.py
and I could not detect the RELAY type. But than again I do not know alot of both of the systems, just guessing.

martinhjelmare

@mirko314

You should send a value from the node child to set initial state also. I think that's what's missing.

Read my post here:
http://forum.mysensors.org/topic/2388/home-assistant-how-to-recognize-mysensors-nodes/27

mirko314

@martinhjelmare
Would you mind to elaborate a bit more?
I am not sure how to alter the script.

martinhjelmare

@mirko314

For example:

...
MySensor gw;
MyMessage msgArray[NUMBER_OF_RELAYS];
for (int sensor=1; sensor<=NUMBER_OF_RELAYS;sensor++) {
    msgArray[sensor-1] = msg(sensor, V_STATUS);
}

void setup() {
    ...
    gw.begin();
    for (int sensor=1; sensor<=NUMBER_OF_RELAYS;sensor++) {
        gw.present(sensor, S_BINARY);
        gw.send(msgArray[sensor-1].set(0));
    }
    ...
}

If you don't need to send any more messages after the setup funtion, ie access the message variables in the array anywhere else, you can move the assigning of the array in the first for loop to the second for loop in the setup function, to avoid code duplication.

You need to send at least one value per child to populate all data structures in home assistant.

Edit: You can actually move the assigning of the array and only have one for loop, inside the setup funtion, anyhow, since the array is initialized separately outside the functions.

drock1985

Hi @martinhjelmare

I have installed 0.11.1 and added the lines to configuration.yaml, but my sensors are bit showing in ha itself. The ID of the nodes is being passed to ha in the log, but nothing else. Trying to set to a pir, temp/humid, and relay switches.

martinhjelmare

@drock1985

Please show me the home assistant log. I can't really say anything useful without it.

drock1985

Hi @martinhjelmare

here is the output from /home/pi/.homeassistant/home-assistant.log:

6-01-24 15:08:16 netdisco.ssdp: Found malformed XML at http://192.168.86.142:9080: status=ok

This is my configuration.yaml

homeassistant:
  # Name of the location where Home Assistant is running
  name: Home
  # Location required to calculate the time the sun rises and sets
  latitude: 
  longitude: 
  # C for Celcius, F for Fahrenheit
  temperature_unit: C
  # Pick yours from here: http://en.wikipedia.org/wiki/List_of_tz_database_time_zones
  time_zone: America/Halifax

# Enables the frontend
frontend:

# Checks for available updates
updater:

# View all events in a logbook
logbook:
# Track the sun
sun:

# Enables support for tracking state changes over time.
history:

# Show links to resources in log and frontend
#introduction:

# Allows you to issue voice commands from the frontend
conversation:

# Discover some devices automatically
discovery:

# Webcams
camera 1:
  platform: mjpeg
  mjpeg_url: http://192.168.86.117:10012/videofeed
  name: LivingRoom Camera
  username: root
  password: groot

# Squeezebox Server
media_player 1:
  platform: squeezebox
  host: 192.168.86.113
  port: 9090

# MySensors Serial Gateway

mysensors:
  gateways:
    - port: '/dev/ttyUSB0'
      persistence_file: '/home/pi/.homeassistant/mysensors.json'
#  debug: true
  persistence: true
  version: '1.5'

Would it be because my nodes are set for manual ID and not auto?

martinhjelmare

@drock1985

The log file only outputs errors as default. Try starting home assistant from the command line with hass and then copy the output. It should be a lot more than one line.

You should shut down home assistant first if you have it running as a service.

Activate debug first for mysensors though.

drock1985

@martinhjelmare

Here is the .log file

16-01-24 15:25:28 mysensors.mysensors: Error decoding message from gateway, probably received bad byte.

And from the SSH console after running hass as instructed

INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.108
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.108
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163
INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state media_player.master_bedroom=off; supported_media_commands=1021, friendly_name=Master Bedroom @ 15:25:41 24-01-2016>, entity_id=media_player.master_bedroom>
INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state media_player.man_cave=off; supported_media_commands=1021, friendly_name=Man Cave @ 15:25:41 24-01-2016>, entity_id=media_player.man_cave>
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.108
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163
INFO:pywemo.subscribe:Subscribing to events from <WeMo Switch "CatFan">
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111
INFO:pywemo.subscribe:Subscribing to events from <WeMo Switch "LivingRoomLamp">
INFO:pywemo.subscribe:Resubscribe for <WeMo Switch "CatFan">
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.108
INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state media_player.living_room=off; supported_media_commands=1021, friendly_name=Living Room @ 15:25:41 24-01-2016>, entity_id=media_player.living_room>
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.108
INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state switch.catfan=off; friendly_name=CatFan @ 15:25:41 24-01-2016>, entity_id=switch.catfan>
INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state group.all_switches=unknown; auto=True, entity_id=[], friendly_name=all switches @ 15:25:41 24-01-2016>, entity_id=group.all_switches>
INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state group.all_switches=off; auto=True, entity_id=('switch.catfan',), friendly_name=all switches @ 15:25:41 24-01-2016>, entity_id=group.all_switches>
INFO:pywemo.subscribe:Resubscribe for <WeMo Switch "LivingRoomLamp">
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111
INFO:pywemo.subscribe:Received event from <WeMo Switch "CatFan">(192.168.86.108)
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163
INFO:homeassistant.components.switch.wemo:Subscription update for  <WeMo Switch "CatFan">
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.108
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111
INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state switch.livingroomlamp=off; friendly_name=LivingRoomLamp @ 15:25:42 24-01-2016>, entity_id=switch.livingroomlamp>
INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state group.all_switches=off; auto=True, entity_id=('switch.catfan', 'switch.livingroomlamp'), friendly_name=all switches @ 15:25:42 24-01-2016>, entity_id=group.all_switches>
INFO:pywemo.subscribe:Received event from <WeMo Switch "LivingRoomLamp">(192.168.86.163)
INFO:homeassistant.components.switch.wemo:Subscription update for  <WeMo Switch "LivingRoomLamp">
INFO:pywemo.subscribe:Subscribing to events from <WeMo Insight "Christmas Tree Lights">
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111
INFO:pywemo.subscribe:Resubscribe for <WeMo Insight "Christmas Tree Lights">
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111
INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state switch.christmas_tree_lights=off; friendly_name=Christmas Tree Lights @ 15:25:42 24-01-2016>, entity_id=switch.christmas_tree_lights>
INFO:pywemo.subscribe:Received event from <WeMo Insight "Christmas Tree Lights">(192.168.86.111)
INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state group.all_switches=off; auto=True, entity_id=('switch.christmas_tree_lights', 'switch.catfan', 'switch.livingroomlamp'), friendly_name=all switches @ 15:25:42 24-01-2016>, entity_id=group.all_switches>
INFO:homeassistant.components.switch.wemo:Subscription update for  <WeMo Insight "Christmas Tree Lights">
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111
INFO:pywemo.subscribe:Received event from <WeMo Insight "Christmas Tree Lights">(192.168.86.111)
INFO:homeassistant.components.switch.wemo:Subscription update for  <WeMo Insight "Christmas Tree Lights">
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.117
INFO:homeassistant.components.http:"GET /states HTTP/1.1" 200 -
INFO:homeassistant.components.http:"GET /static/frontend-1003c31441ec44b3db84b49980f736a7.html HTTP/1.1" 200 -
INFO:homeassistant.components.http:"GET /static/favicon-192x192.png HTTP/1.1" 200 -
INFO:homeassistant.components.http:"GET /static/favicon.ico HTTP/1.1" 200 -
INFO:homeassistant.components.http:"GET /api/bootstrap HTTP/1.1" 200 -
INFO:homeassistant.components.http:"GET /api/stream?api_password=no_password_set&restrict=state_changed,component_loaded,service_registered HTTP/1.1" 200 -
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.117
INFO:homeassistant.components.media_player:Updating media_player entities
INFO:homeassistant.components.http:"GET /api/error_log HTTP/1.1" 200 -
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=2,c=1,t=16,pt=0,l=1,sg=0:1
INFO:homeassistant.components.media_player:Updating media_player entities
INFO:homeassistant.components.light:Updating light entities
INFO:homeassistant.components.camera:Updating camera entities
INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state camera.livingroom_camera=idle; entity_picture=/api/camera_proxy/camera.livingroom_camera?time=1453663560.5128732, friendly_name=LivingRoom Camera @ 15:25:24 24-01-2016>, old_state=<state camera.livingroom_camera=idle; entity_picture=/api/camera_proxy/camera.livingroom_camera?time=1453663530.5116684, friendly_name=LivingRoom Camera @ 15:25:24 24-01-2016>, entity_id=camera.livingroom_camera>
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 3-3-0 s=255,c=0,t=17,pt=0,l=5,sg=0:1.5.1
INFO:homeassistant.components.mysensors:update sensor_update: node 3
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 3-3-0 s=255,c=3,t=6,pt=1,l=1,sg=0:0
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:send: 0-0-3-3 s=255,c=3,t=6,pt=0,l=1,sg=0,st=ok:M
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=2,c=1,t=16,pt=0,l=1,sg=0:1
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 3-3-0 s=255,c=3,t=11,pt=0,l=25,sg=0:2 Door bell/chime
INFO:homeassistant.components.mysensors:update sensor_update: node 3
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 3-3-0 s=255,c=3,t=12,pt=0,l=3,sg=0:1.0
INFO:homeassistant.components.mysensors:update sensor_update: node 3
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 3-3-0 s=1,c=0,t=3,pt=0,l=0,sg=0:
INFO:homeassistant.components.mysensors:update sensor_update: node 3
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 3-3-0 s=0,c=0,t=1,pt=0,l=0,sg=0:
INFO:homeassistant.components.mysensors:update sensor_update: node 3
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 3-3-0 s=3,c=0,t=3,pt=0,l=0,sg=0:
INFO:homeassistant.components.mysensors:update sensor_update: node 3
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 3-3-0 s=2,c=0,t=1,pt=0,l=0,sg=0:
INFO:homeassistant.components.mysensors:update sensor_update: node 3
INFO:homeassistant.components.media_player:Updating media_player entities
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.117
INFO:homeassistant.components.http:"GET /states HTTP/1.1" 200 -
INFO:homeassistant.components.http:"GET /static/frontend-1003c31441ec44b3db84b49980f736a7.html HTTP/1.1" 200 -
INFO:homeassistant.components.http:"GET /static/favicon-192x192.png HTTP/1.1" 200 -
INFO:homeassistant.components.http:"GET /static/favicon.ico HTTP/1.1" 200 -
INFO:homeassistant.components.http:"GET /api/bootstrap HTTP/1.1" 200 -
INFO:homeassistant.components.http:"GET /api/stream?api_password=no_password_set&restrict=state_changed,component_loaded,service_registered HTTP/1.1" 200 -
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.117
INFO:homeassistant.components.api:Found broken event stream to 192.168.86.162, cleaning up
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=2,c=1,t=16,pt=0,l=1,sg=0:1
INFO:homeassistant.components.media_player:Updating media_player entities
INFO:homeassistant.components.media_player:Updating media_player entities
INFO:homeassistant.components.light:Updating light entities
INFO:homeassistant.components.camera:Updating camera entities
INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state camera.livingroom_camera=idle; entity_picture=/api/camera_proxy/camera.livingroom_camera?time=1453663590.5271018, friendly_name=LivingRoom Camera @ 15:25:24 24-01-2016>, old_state=<state camera.livingroom_camera=idle; entity_picture=/api/camera_proxy/camera.livingroom_camera?time=1453663560.5128732, friendly_name=LivingRoom Camera @ 15:25:24 24-01-2016>, entity_id=camera.livingroom_camera>
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.117
INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state sun.sun=above_horizon; next_rising=11:43:05 25-01-2016, elevation=14.76, next_setting=21:15:13 24-01-2016, friendly_name=Sun @ 15:25:24 24-01-2016>, old_state=<state sun.sun=above_horizon; next_rising=11:43:05 25-01-2016, elevation=14.88, next_setting=21:15:13 24-01-2016, friendly_name=Sun @ 15:25:24 24-01-2016>, entity_id=sun.sun>
INFO:homeassistant.components.api:Found broken event stream to 192.168.86.162, cleaning up
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=0,c=1,t=1,pt=7,l=5,sg=0:46.5
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=2,c=1,t=16,pt=0,l=1,sg=0:1
INFO:homeassistant.components.media_player:Updating media_player entities
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=2,c=1,t=16,pt=0,l=1,sg=0:1
INFO:homeassistant.components.media_player:Updating media_player entities
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=0,c=1,t=1,pt=7,l=5,sg=0:46.6
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=2,c=1,t=16,pt=0,l=1,sg=0:1
INFO:homeassistant.components.media_player:Updating media_player entities
INFO:homeassistant.components.light:Updating light entities
INFO:homeassistant.components.camera:Updating camera entities
INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state camera.livingroom_camera=idle; entity_picture=/api/camera_proxy/camera.livingroom_camera?time=1453663620.51471, friendly_name=LivingRoom Camera @ 15:25:24 24-01-2016>, old_state=<state camera.livingroom_camera=idle; entity_picture=/api/camera_proxy/camera.livingroom_camera?time=1453663590.5271018, friendly_name=LivingRoom Camera @ 15:25:24 24-01-2016>, entity_id=camera.livingroom_camera>
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.117
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=2,c=1,t=16,pt=0,l=1,sg=0:1
INFO:homeassistant.components.media_player:Updating media_player entities
INFO:homeassistant.components.media_player:Updating media_player entities
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=2,c=1,t=16,pt=0,l=1,sg=0:1
INFO:homeassistant.components.media_player:Updating media_player entities
INFO:homeassistant.components.light:Updating light entities
INFO:homeassistant.components.camera:Updating camera entities
INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state camera.livingroom_camera=idle; entity_picture=/api/camera_proxy/camera.livingroom_camera?time=1453663650.5204854, friendly_name=LivingRoom Camera @ 15:25:24 24-01-2016>, old_state=<state camera.livingroom_camera=idle; entity_picture=/api/camera_proxy/camera.livingroom_camera?time=1453663620.51471, friendly_name=LivingRoom Camera @ 15:25:24 24-01-2016>, entity_id=camera.livingroom_camera>
INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state sun.sun=above_horizon; next_rising=11:43:05 25-01-2016, elevation=14.63, next_setting=21:15:13 24-01-2016, friendly_name=Sun @ 15:25:24 24-01-2016>, old_state=<state sun.sun=above_horizon; next_rising=11:43:05 25-01-2016, elevation=14.76, next_setting=21:15:13 24-01-2016, friendly_name=Sun @ 15:25:24 24-01-2016>, entity_id=sun.sun>
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=0,c=1,t=1,pt=7,l=5,sg=0:46.5
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=2,c=1,t=16,pt=0,l=1,sg=0:1

martinhjelmare

@drock1985

Is it node 3 that is missing for you? It seems you're presenting it fine but never send the needed value for the four sensors, 0-3, on the node.

Then you also have node 1 with two sensors 0 and 2 that seems to update, but you haven't posted the beginning of the log where those are presented or loaded from persistence. I'm also missing the gateway started confirmation in the log.

drock1985

Hi @martinhjelmare

the file /home/pi/.homeassistant/home-assistant.log has no errors in it, and it's all of my nodes that are missing (1 through 4 and 6), Node 5 isn't online right now.

Is that what you are looking for at the top?


INFO:homeassistant.components.recorder:Closing database
pi@home-assistant:~/.homeassistant $ clear
pi@home-assistant:~/.homeassistant $ hass
Config directory: /home/pi/.homeassistant
WARNING:homeassistant.bootstrap:Colorlog package not found, console coloring disabled
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=homeassistant, service=turn_off>
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=homeassistant, service=turn_on>
INFO:homeassistant.bootstrap:Home Assistant core initialized
INFO:homeassistant.loader:Loaded mysensors from homeassistant.components.mysensors
INFO:homeassistant.loader:Loaded media_player from homeassistant.components.media_player
INFO:homeassistant.loader:Loaded sun from homeassistant.components.sun
INFO:homeassistant.loader:Loaded updater from homeassistant.components.updater
INFO:homeassistant.loader:Loaded discovery from homeassistant.components.discovery
INFO:homeassistant.loader:Loaded conversation from homeassistant.components.conversation
INFO:homeassistant.loader:Loaded frontend from homeassistant.components.frontend
INFO:homeassistant.loader:Loaded api from homeassistant.components.api
INFO:homeassistant.loader:Loaded http from homeassistant.components.http
INFO:homeassistant.loader:Loaded logbook from homeassistant.components.logbook
INFO:homeassistant.loader:Loaded recorder from homeassistant.components.recorder
INFO:homeassistant.loader:Loaded history from homeassistant.components.history
INFO:homeassistant.loader:Loaded camera from homeassistant.components.camera
INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=recorder>
INFO:homeassistant.loader:Loaded sensor from homeassistant.components.sensor
INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=sensor>
INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: service=mysensors.sensors, discovered=>
INFO:homeassistant.loader:Loaded switch from homeassistant.components.switch
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=switch, service=turn_off>
INFO:homeassistant.loader:Loaded sensor.mysensors from homeassistant.components.sensor.mysensors
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=switch, service=turn_on>
INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=switch>
INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: service=mysensors.switches, discovered=>
INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=mysensors>
INFO:homeassistant.loader:Loaded switch.mysensors from homeassistant.components.switch.mysensors
INFO:homeassistant.loader:Loaded media_player.squeezebox from homeassistant.components.media_player.squeezebox
INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state media_player.airspeaker=off; friendly_name=AirSpeaker, supported_media_commands=447 @ 17:05:03 24-01-2016>, entity_id=media_player.airspeaker>
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_player, service=media_play>
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_player, service=volume_down>
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_player, service=media_play_pause>
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_player, service=media_pause>
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_player, service=volume_up>
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_player, service=media_previous_track>
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_player, service=turn_off>
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_player, service=play_media>
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_player, service=media_next_track>
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_player, service=turn_on>
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_player, service=volume_set>
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_player, service=volume_mute>
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_player, service=media_seek>
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_player, service=start_fireplace>
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_player, service=start_epic_sax>
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_player, service=play_youtube_video>
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=media_player, service=play_media>
INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=media_player>
INFO:urllib3.connectionpool:Starting new HTTP connection (1): maps.googleapis.com
INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state sun.sun=above_horizon; next_setting=21:15:13 24-01-2016, next_rising=11:43:05 25-01-2016, friendly_name=Sun, elevation=1.17 @ 17:05:03 24-01-2016>, entity_id=sun.sun>
INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=sun>
INFO:urllib3.connectionpool:Starting new HTTPS connection (1): pypi.python.org
INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=updater>
INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=discovery>
/home/pi/.homeassistant/lib/fuzzywuzzy/fuzz.py:33: UserWarning: Using slow pure-python SequenceMatcher. Install python-Levenshtein to remove this warning
  warnings.warn('Using slow pure-python SequenceMatcher. Install python-Levenshtein to remove this warning')
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=conversation, service=process>
INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=conversation>
INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=http>
INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=api>
INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=frontend>
INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=logbook>
INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=history>
INFO:homeassistant.loader:Loaded camera.mjpeg from homeassistant.components.camera.mjpeg
INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state camera.livingroom_camera=idle; friendly_name=LivingRoom Camera, entity_picture=/api/camera_proxy/camera.livingroom_camera?time=1453669504.2007444 @ 17:05:04 24-01-2016>, entity_id=camera.livingroom_camera>
INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=camera>
INFO:homeassistant.core:Starting Home Assistant (17 threads)
INFO:homeassistant.core:Bus:Handling <Event homeassistant_start[L]>
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=homeassistant, service=stop>
INFO:mysensors.mysensors:Trying to connect to /dev/ttyUSB0
INFO:homeassistant.core:Timer:starting
INFO:homeassistant.components.http:Starting web interface at http://0.0.0.0:8123
INFO:homeassistant.components.mysensors:update persistence: node 2
INFO:homeassistant.components.mysensors:No sketch_name: node 2
INFO:homeassistant.components.mysensors:No sketch_name: node 2
INFO:homeassistant.components.mysensors:update persistence: node 3
INFO:netdisco.service:Scanning
INFO:homeassistant.components.http:"GET /api/stream?api_password=no_password_set&restrict=state_changed,component_loaded,service_registered HTTP/1.1" 200 -
INFO:homeassistant.components.http:"GET /api/bootstrap HTTP/1.1" 200 -
INFO:mysensors.mysensors:/dev/ttyUSB0 is open...
INFO:mysensors.mysensors:Connected to /dev/ttyUSB0
WARNING:mysensors.mysensors:Error decoding message from gateway, probably received bad byte.
INFO:homeassistant.components.media_player:Updating media_player entities
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=2,c=1,t=16,pt=0,l=1,sg=0:1
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.4
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.1
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.113
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.113
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.101
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.163
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.108
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.111
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.142
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.199
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.102
INFO:homeassistant.components.discovery:Found new service: DLNA http://192.168.86.4:32469/DeviceDescription.xml
INFO:homeassistant.components.discovery:Found new service: DLNA http://192.168.86.113:9000/plugins/UPnP/MediaServer.xml
INFO:homeassistant.components.discovery:Found new service: google_cast ('192.168.86.101', 8009)
INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: service=google_cast, discovered=('192.168.86.101', 8009)>
INFO:homeassistant.components.discovery:Found new service: google_cast ('192.168.86.102', 8009)
INFO:homeassistant.loader:Loaded media_player.cast from homeassistant.components.media_player.cast
INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: service=google_cast, discovered=('192.168.86.102', 8009)>
INFO:homeassistant.components.discovery:Found new service: belkin_wemo ('Christmas Tree Lights', 'Insight', 'http://192.168.86.111:49153/setup.xml', '94103E395F2C')
INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: service=belkin_wemo, discovered=('Christmas Tree Lights', 'Insight', 'http://192.168.86.111:49153/setup.xml', '94103E395F2C')>
INFO:homeassistant.components.discovery:Found new service: belkin_wemo ('CatFan', 'Socket', 'http://192.168.86.108:49153/setup.xml', '94103E30CDBC')
INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: service=belkin_wemo, discovered=('CatFan', 'Socket', 'http://192.168.86.108:49153/setup.xml', '94103E30CDBC')>
INFO:homeassistant.components.discovery:Found new service: belkin_wemo ('LivingRoomLamp', 'Socket', 'http://192.168.86.163:49153/setup.xml', '94103E30C688')
INFO:homeassistant.loader:Loaded switch.wemo from homeassistant.components.switch.wemo
INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: service=belkin_wemo, discovered=('LivingRoomLamp', 'Socket', 'http://192.168.86.163:49153/setup.xml', '94103E30C688')>
INFO:homeassistant.loader:Loaded switch.wemo from homeassistant.components.switch.wemo
ERROR:homeassistant.components.switch:Error while setting up platform wemo
Traceback (most recent call last):
  File "/usr/local/lib/python3.4/dist-packages/homeassistant/helpers/entity_component.py", line 145, in _setup_platform
    self.hass, platform_config, self.add_entities, discovery_info)
  File "/usr/local/lib/python3.4/dist-packages/homeassistant/components/switch/wemo.py", line 25, in setup_platform
    import pywemo.discovery as discovery
AttributeError: 'module' object has no attribute 'discovery'
ERROR:homeassistant.components.switch:Error while setting up platform wemo
Traceback (most recent call last):
  File "/usr/local/lib/python3.4/dist-packages/homeassistant/helpers/entity_component.py", line 145, in _setup_platform
    self.hass, platform_config, self.add_entities, discovery_info)
  File "/usr/local/lib/python3.4/dist-packages/homeassistant/components/switch/wemo.py", line 25, in setup_platform
    import pywemo.discovery as discovery
AttributeError: 'module' object has no attribute 'discovery'
ERROR:homeassistant.components.switch:Error while setting up platform wemo
Traceback (most recent call last):
  File "/usr/local/lib/python3.4/dist-packages/homeassistant/helpers/entity_component.py", line 145, in _setup_platform
    self.hass, platform_config, self.add_entities, discovery_info)
  File "/usr/local/lib/python3.4/dist-packages/homeassistant/components/switch/wemo.py", line 25, in setup_platform
    import pywemo.discovery as discovery
AttributeError: 'module' object has no attribute 'discovery'
INFO:pychromecast:Querying device status
INFO:pychromecast:Querying device status
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.102
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.101
INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state media_player.man_cave=off; friendly_name=Man Cave, supported_media_commands=1021 @ 17:05:19 24-01-2016>, entity_id=media_player.man_cave>
INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state media_player.master_bedroom=off; friendly_name=Master Bedroom, supported_media_commands=1021 @ 17:05:19 24-01-2016>, entity_id=media_player.master_bedroom>
INFO:homeassistant.components.discovery:Found new service: plex_mediaserver ('Rocknet Server', 'https://192.168.86.4:32400')
INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: service=plex_mediaserver, discovered=('Rocknet Server', 'https://192.168.86.4:32400')>
INFO:homeassistant.components.discovery:Found new service: philips_hue ('Philips hue (192.168.86.199)', 'http://192.168.86.199:80/')
INFO:homeassistant.loader:Loaded media_player.plex from homeassistant.components.media_player.plex
INFO:homeassistant.loader:Loaded light from homeassistant.components.light
INFO:homeassistant.components.media_player:Updating media_player entities
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=light, service=turn_on>
INFO:homeassistant.core:Bus:Handling <Event service_registered[L]: domain=light, service=turn_off>
INFO:homeassistant.core:Bus:Handling <Event component_loaded[L]: component=light>
INFO:homeassistant.core:Bus:Handling <Event platform_discovered[L]: service=philips_hue, discovered=('Philips hue (192.168.86.199)', 'http://192.168.86.199:80/')>
INFO:homeassistant.loader:Loaded light.hue from homeassistant.components.light.hue
INFO:phue:Attempting to connect to the bridge...
INFO:phue:Using ip: 192.168.86.199
INFO:phue:Using username from config: 30f609e6210320e41f0dfc32220a525f
Exception in thread Thread-25:
Traceback (most recent call last):
  File "/usr/lib/python3.4/threading.py", line 920, in _bootstrap_inner
    self.run()
  File "/home/pi/.homeassistant/lib/zeroconf.py", line 1063, in run
    handler(self.zc)
  File "/home/pi/.homeassistant/lib/zeroconf.py", line 1014, in <lambda>
    state_change=state_change,
  File "/home/pi/.homeassistant/lib/zeroconf.py", line 931, in fire
    h(**kwargs)
  File "/home/pi/.homeassistant/lib/zeroconf.py", line 989, in on_change
    listener.add_service(*args)
  File "/home/pi/.homeassistant/lib/netdisco/discoverables/__init__.py", line 84, in add_service
    service = zconf.get_service_info(typ, name)
  File "/home/pi/.homeassistant/lib/zeroconf.py", line 1404, in get_service_info
    if info.request(self, timeout):
  File "/home/pi/.homeassistant/lib/zeroconf.py", line 1221, in request
    zc.send(out)
  File "/home/pi/.homeassistant/lib/zeroconf.py", line 1663, in send
    bytes_sent = s.sendto(packet, 0, (addr, port))
OSError: [Errno 9] Bad file descriptor

INFO:plexapi:GET http://192.168.86.4:32400/
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.4
INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state light.master_bedroom_1=off; friendly_name=Master bedroom 1 @ 17:05:20 24-01-2016>, entity_id=light.master_bedroom_1>
INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state light.master_bedroom_2=off; friendly_name=Master bedroom 2 @ 17:05:20 24-01-2016>, entity_id=light.master_bedroom_2>
INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state light.aprils_lamp=off; friendly_name=April's lamp @ 17:05:20 24-01-2016>, entity_id=light.aprils_lamp>
INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state light.living_room_light_1=off; friendly_name=Living room light 1 @ 17:05:20 24-01-2016>, entity_id=light.living_room_light_1>
INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state light.master_bedroom_light_strip=off; friendly_name=Master bedroom light strip @ 17:05:20 24-01-2016>, entity_id=light.master_bedroom_light_strip>
INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state light.living_room_light_2=off; friendly_name=Living room light 2 @ 17:05:20 24-01-2016>, entity_id=light.living_room_light_2>
INFO:homeassistant.components.media_player.plex:Connected to: htts://192.168.86.4:32400
INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state light.master_bedroom_3=off; friendly_name=Master bedroom 3 @ 17:05:20 24-01-2016>, entity_id=light.master_bedroom_3>
INFO:plexapi:GET http://192.168.86.4:32400/clients
INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state group.all_lights=unknown; entity_id=[], friendly_name=all lights, auto=True @ 17:05:20 24-01-2016>, entity_id=group.all_lights>
INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state group.all_lights=off; entity_id=('light.living_room_light_1', 'light.living_room_light_2', 'light.master_bedroom_3', 'light.master_bedroom_2', 'light.master_bedroom_1', 'light.master_bedroom_light_strip', 'light.aprils_lamp'), friendly_name=all lights, auto=True @ 17:05:20 24-01-2016>, entity_id=group.all_lights>
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.4
INFO:plexapi:GET http://192.168.86.4:32400/status/sessions
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.4
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=2,c=1,t=16,pt=0,l=1,sg=0:1
INFO:homeassistant.components.camera:Updating camera entities
INFO:homeassistant.components.light:Updating light entities
INFO:homeassistant.components.media_player:Updating media_player entities
INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state camera.livingroom_camera=idle; friendly_name=LivingRoom Camera, entity_picture=/api/camera_proxy/camera.livingroom_camera?time=1453669530.5242217 @ 17:05:04 24-01-2016>, entity_id=camera.livingroom_camera, old_state=<state camera.livingroom_camera=idle; friendly_name=LivingRoom Camera, entity_picture=/api/camera_proxy/camera.livingroom_camera?time=1453669504.2007444 @ 17:05:04 24-01-2016>>
INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state sun.sun=above_horizon; next_setting=21:15:13 24-01-2016, next_rising=11:43:05 25-01-2016, friendly_name=Sun, elevation=1.1 @ 17:05:03 24-01-2016>, entity_id=sun.sun, old_state=<state sun.sun=above_horizon; next_setting=21:15:13 24-01-2016, next_rising=11:43:05 25-01-2016, friendly_name=Sun, elevation=1.17 @ 17:05:03 24-01-2016>>
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 3-3-0 s=255,c=0,t=17,pt=0,l=5,sg=0:1.5.1
INFO:homeassistant.components.mysensors:update sensor_update: node 3
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 3-3-0 s=255,c=3,t=6,pt=1,l=1,sg=0:0
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:send: 0-0-3-3 s=255,c=3,t=6,pt=0,l=1,sg=0,st=ok:M
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 3-3-0 s=255,c=3,t=11,pt=0,l=25,sg=0:2 Door bell/chime
INFO:homeassistant.components.mysensors:update sensor_update: node 3
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 3-3-0 s=255,c=3,t=12,pt=0,l=3,sg=0:1.0
INFO:homeassistant.components.mysensors:update sensor_update: node 3
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 3-3-0 s=1,c=0,t=3,pt=0,l=0,sg=0:
INFO:homeassistant.components.mysensors:update sensor_update: node 3
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 3-3-0 s=0,c=0,t=1,pt=0,l=0,sg=0:
INFO:homeassistant.components.mysensors:update sensor_update: node 3
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 3-3-0 s=3,c=0,t=3,pt=0,l=0,sg=0:
INFO:homeassistant.components.mysensors:update sensor_update: node 3
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 3-3-0 s=2,c=0,t=1,pt=0,l=0,sg=0:
INFO:homeassistant.components.mysensors:update sensor_update: node 3
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.117
INFO:homeassistant.components.media_player:Updating media_player entities
INFO:homeassistant.components.http:"GET /states HTTP/1.1" 200 -
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=2,c=1,t=16,pt=0,l=1,sg=0:1
INFO:homeassistant.components.http:"GET /static/frontend-1003c31441ec44b3db84b49980f736a7.html HTTP/1.1" 200 -
INFO:homeassistant.components.http:"GET /static/favicon-192x192.png HTTP/1.1" 200 -
INFO:homeassistant.components.http:"GET /static/favicon.ico HTTP/1.1" 200 -
INFO:homeassistant.components.http:"GET /api/bootstrap HTTP/1.1" 200 -
INFO:homeassistant.components.http:"GET /api/stream?api_password=no_password_set&restrict=state_changed,component_loaded,service_registered HTTP/1.1" 200 -
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.117
INFO:homeassistant.core:Bus:Handling <Event call_service[L]: domain=homeassistant, entity_id=light.living_room_light_1, service_call_id=1981876976-1, service=turn_on>
INFO:homeassistant.loader:Loaded group from homeassistant.components.group
INFO:homeassistant.core:Bus:Handling <Event call_service[L]: domain=light, entity_id=['light.living_room_light_1'], service_call_id=1981876976-2, service=turn_on>
INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state light.living_room_light_1=on; brightness=254, friendly_name=Living room light 1 @ 17:05:47 24-01-2016>, entity_id=light.living_room_light_1, old_state=<state light.living_room_light_1=off; friendly_name=Living room light 1 @ 17:05:20 24-01-2016>>
INFO:homeassistant.core:Bus:Handling <Event service_executed[L]: service_call_id=1981876976-2>
INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state group.all_lights=on; entity_id=('light.living_room_light_1', 'light.living_room_light_2', 'light.master_bedroom_3', 'light.master_bedroom_2', 'light.master_bedroom_1', 'light.master_bedroom_light_strip', 'light.aprils_lamp'), friendly_name=all lights, auto=True @ 17:05:47 24-01-2016>, entity_id=group.all_lights, old_state=<state group.all_lights=off; entity_id=('light.living_room_light_1', 'light.living_room_light_2', 'light.master_bedroom_3', 'light.master_bedroom_2', 'light.master_bedroom_1', 'light.master_bedroom_light_strip', 'light.aprils_lamp'), friendly_name=all lights, auto=True @ 17:05:20 24-01-2016>>
INFO:homeassistant.core:Bus:Handling <Event service_executed[L]: service_call_id=1981876976-1>
INFO:homeassistant.components.api:Found broken event stream to 192.168.86.162, cleaning up
INFO:homeassistant.components.http:"POST /api/services/homeassistant/turn_on HTTP/1.1" 200 -
INFO:homeassistant.components.http:"GET /api/history/period?filter_entity_id=light.living_room_light_2 HTTP/1.1" 200 -
INFO:homeassistant.core:Bus:Handling <Event call_service[L]: domain=homeassistant, entity_id=light.living_room_light_2, service_call_id=1981876976-3, service=turn_on>
INFO:homeassistant.core:Bus:Handling <Event call_service[L]: domain=light, entity_id=['light.living_room_light_2'], service_call_id=1981876976-4, service=turn_on>
INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state light.living_room_light_2=on; brightness=254, friendly_name=Living room light 2 @ 17:05:49 24-01-2016>, entity_id=light.living_room_light_2, old_state=<state light.living_room_light_2=off; friendly_name=Living room light 2 @ 17:05:20 24-01-2016>>
INFO:homeassistant.core:Bus:Handling <Event service_executed[L]: service_call_id=1981876976-4>
INFO:homeassistant.core:Bus:Handling <Event service_executed[L]: service_call_id=1981876976-3>
INFO:homeassistant.components.http:"POST /api/services/homeassistant/turn_on HTTP/1.1" 200 -
INFO:homeassistant.components.http:"GET /api/history/period?filter_entity_id=light.living_room_light_1 HTTP/1.1" 200 -
INFO:homeassistant.components.media_player:Updating media_player entities
INFO:homeassistant.components.http:"GET /states HTTP/1.1" 200 -
INFO:homeassistant.components.http:"GET /static/frontend-1003c31441ec44b3db84b49980f736a7.html HTTP/1.1" 200 -
INFO:homeassistant.components.http:"GET /static/favicon-192x192.png HTTP/1.1" 200 -
INFO:homeassistant.components.http:"GET /static/favicon.ico HTTP/1.1" 200 -
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=2,c=1,t=16,pt=0,l=1,sg=0:1
INFO:homeassistant.components.http:"GET /api/bootstrap HTTP/1.1" 200 -
INFO:homeassistant.components.http:"GET /api/stream?api_password=no_password_set&restrict=state_changed,component_loaded,service_registered HTTP/1.1" 200 -
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.117
INFO:homeassistant.components.http:"GET /api/error_log HTTP/1.1" 200 -
INFO:homeassistant.components.camera:Updating camera entities
INFO:homeassistant.components.light:Updating light entities
INFO:homeassistant.components.media_player:Updating media_player entities
INFO:homeassistant.core:Bus:Handling <Event state_changed[L]: new_state=<state camera.livingroom_camera=idle; friendly_name=LivingRoom Camera, entity_picture=/api/camera_proxy/camera.livingroom_camera?time=1453669560.5092123 @ 17:05:04 24-01-2016>, entity_id=camera.livingroom_camera, old_state=<state camera.livingroom_camera=idle; friendly_name=LivingRoom Camera, entity_picture=/api/camera_proxy/camera.livingroom_camera?time=1453669530.5242217 @ 17:05:04 24-01-2016>>
INFO:homeassistant.components.http:"GET /devInfo HTTP/1.1" 200 -
INFO:homeassistant.components.http:"GET /static/frontend-1003c31441ec44b3db84b49980f736a7.html HTTP/1.1" 200 -
INFO:homeassistant.components.http:"GET /static/favicon-192x192.png HTTP/1.1" 200 -
INFO:homeassistant.components.http:"GET /static/favicon.ico HTTP/1.1" 200 -
INFO:homeassistant.components.http:"GET /api/bootstrap HTTP/1.1" 200 -
INFO:homeassistant.components.http:"GET /api/stream?api_password=no_password_set&restrict=state_changed,component_loaded,service_registered HTTP/1.1" 200 -
INFO:homeassistant.components.http:"GET /api/error_log HTTP/1.1" 200 -
INFO:urllib3.connectionpool:Starting new HTTP connection (1): 192.168.86.117
INFO:mysensors.mysensors:n:0 c:0 t:3 s:9 p:read: 1-1-0 s=2,c=1,t=16,pt=0,l=1,sg=0:1
INFO:homeassistant.components.media_player:Updating media_player entities
^CINFO:homeassistant.core:Stopping
INFO:homeassistant.core:Bus:Handling <Event homeassistant_stop[L]>
INFO:mysensors.mysensors:Disconnecting from /dev/ttyUSB0
INFO:mysensors.mysensors:Stopping thread
INFO:homeassistant.components.recorder:Closing database
pi@home-assistant:~/.homeassistant $

drock1985

I'm still trying to get this to work, with mixed results. Noticed on startup sometimes that HA was starting before my Serial port was initialized. Added a .timer file to delay the start of HA until the Pi is fully booted. Still having problems, but now i'm getting this in the HA logs:

16-01-24 18:37:40 homeassistant.core: BusHandler:Exception doing job
Traceback (most recent call last):
  File "/usr/local/lib/python3.4/dist-packages/homeassistant/core.py", line 829, in job_handler
    func(arg)
  File "/usr/local/lib/python3.4/dist-packages/homeassistant/core.py", line 302, in onetime_listener
    listener(event)
  File "/usr/local/lib/python3.4/dist-packages/homeassistant/components/mysensors.py", line 104, in gw_start
    gateway.event_callback('persistence', node_id)
  File "/usr/local/lib/python3.4/dist-packages/homeassistant/components/mysensors.py", line 226, in node_update
    callback(self, node_id)
  File "/usr/local/lib/python3.4/dist-packages/homeassistant/components/mysensors.py", line 165, in mysensors_callback
    add_devices(devices[node_id])
  File "/usr/local/lib/python3.4/dist-packages/homeassistant/helpers/entity_component.py", line 81, in add_entities
    entity.update_ha_state()
  File "/usr/local/lib/python3.4/dist-packages/homeassistant/helpers/entity.py", line 108, in update_ha_state
    self.unit_of_measurement is not None:
  File "/usr/local/lib/python3.4/dist-packages/homeassistant/components/sensor/mysensors.py", line 137, in unit_of_measurement
    self.value_type == self.gateway.const.SetReq.V_PERCENTAGE or \
  File "/usr/lib/python3.4/enum.py", line 255, in __getattr__
    raise AttributeError(name) from None
AttributeError: V_PERCENTAGE
16-01-24 18:37:43 mysensors.mysensors: Error decoding message from gateway, probably received bad byte.

martinhjelmare

@drock1985

I think you need to delete the persistence file and start over and present your sensors. You should do this while looking at the output from hass so you get feedback if it's working or not.

From the top of your log output there was a warning about bad byte from the gateway. The gateway started confirmation was never logged. You should see this before you start your sensors. If you don't get the gateway confirmation, try restarting home assistant.

Also in the log, the persistence file loaded sensor 2 and 3, but some data was missing, probably. There was a note about missing sketch name for one of the sensors.

You need to present the sensors properly, including sketch name and then send one value per sensor before they show up in the gui.

Home Assistant v 0.11.1 with switch support

15

11.7k

11.2k

113.1k