Skip to content
  • MySensors
  • OpenHardware.io
  • Categories
  • Recent
  • Tags
  • Popular
Skins
  • Light
  • Brite
  • Cerulean
  • Cosmo
  • Flatly
  • Journal
  • Litera
  • Lumen
  • Lux
  • Materia
  • Minty
  • Morph
  • Pulse
  • Sandstone
  • Simplex
  • Sketchy
  • Spacelab
  • United
  • Yeti
  • Zephyr
  • Dark
  • Cyborg
  • Darkly
  • Quartz
  • Slate
  • Solar
  • Superhero
  • Vapor

  • Default (No Skin)
  • No Skin
Collapse
Brand Logo
  1. Home
  2. Bug Reports
  3. RFM69CW Gateway and Nodes are not working with Api newer then 2.0.0

RFM69CW Gateway and Nodes are not working with Api newer then 2.0.0

Scheduled Pinned Locked Moved Bug Reports
betarfm69cwbug2.1.12.0.0gateway not responding
57 Posts 6 Posters 11.0k Views 3 Watching
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • mfalkviddM Online
    mfalkviddM Online
    mfalkvidd
    Mod
    wrote on last edited by mfalkvidd
    #16

    I think @DavidZH was confused by @archiijs post about the H version.

    I double-checked your sketches and none has the definition for H so now that's out of the way at least.

    @Floca could you post debug output from the gateway and the node (preferably from the same time) ?

    Also, just to double-check, have you made any modifications to MyConfig.h or are you using the untouched original version?

    1 Reply Last reply
    0
    • archiijsA Offline
      archiijsA Offline
      archiijs
      wrote on last edited by
      #17

      Yes, sorry for this, I will stand back til @Floca gets his problem (and maybe mine) figured out and then jump in to avoid confusion, sorry again.

      1 Reply Last reply
      0
      • F Offline
        F Offline
        Floca
        wrote on last edited by Floca
        #18
        GW 2.0.0
        
        Ê$OH˜KlKùið¤0;255;3;0;9;Starting gateway (RRNGE-, 2.0.0)
        0;255;3;0;9;TSM:INIT
        0;255;3;0;9;TSM:RADIO:OK
        0;255;3;0;9;TSM:GW MODE
        0;255;3;0;9;TSM:READY
        scandone
        state: 0 -> 2 (b0)
        state: 2 -> 3 (0)
        state: 3 -> 5 (10)
        add 0
        aid 4
        cnt 
        f r0, scandone
        
        connected with N3tw0rk.NET, channel 1
        dhcp client start...
        ..ip:192.168.178.118,mask:255.255.255.0,gw:192.168.178.1
        .IP: 192.168.178.118
        0;255;3;0;9;No registration required
        0;255;3;0;9;Init complete, id=0, parent=0, distance=0, registration=1
        pm open,type:2 0
        0;255;3;0;9;TSP:MSG:READ 100-100-255 s=255,c=3,t=7,pt=0,l=0,sg=0:
        0;255;3;0;9;TSP:MSG:BC
        0;255;3;0;9;TSP:MSG:FPAR REQ (sender=100)
        0;255;3;0;9;TSP:CHKUPL:OK
        0;255;3;0;9;TSP:MSG:GWL OK
        0;255;3;0;9;TSP:MSG:SEND 0-0-100-100 s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=ok:0
        0;255;3;0;9;TSP:MSG:READ 100-100-0 s=255,c=3,t=24,pt=1,l=1,sg=0:1
        0;255;3;0;9;TSP:MSG:PINGED (ID=100, hops=1)
        0;255;3;0;9;TSP:MSG:SEND 0-0-100-100 s=255,c=3,t=25,pt=1,l=1,sg=0,ft=0,st=ok:1
        0;255;3;0;9;TSP:MSG:READ 100-100-0 s=255,c=3,t=15,pt=6,l=2,sg=0:0100
        0;255;3;0;9;!TSP:MSG:SEND 0-0-100-100 s=255,c=3,t=15,pt=6,l=2,sg=0,ft=0,st=fail:0100
        0;255;3;0;9;TSP:MSG:READ 100-100-0 s=255,c=3,t=6,pt=1,l=1,sg=0:0
        0;255;3;0;9;TSP:MSG:READ 100-100-0 s=255,c=3,t=11,pt=0,l=22,sg=0:TemperatureAndHumidity
        0;255;3;0;9;TSP:MSG:READ 100-100-0 s=0,c=0,t=7,pt=0,l=0,sg=0:
        0;255;3;0;9;TSP:MSG:READ 100-100-0 s=1,c=0,t=6,pt=0,l=0,sg=0:
        0;255;3;0;9;TSP:MSG:READ 100-100-0 s=255,c=3,t=26,pt=1,l=1,sg=0:2
        0;255;3;0;9;TSP:MSG:SEND 0-0-100-100 s=255,c=3,t=27,pt=1,l=1,sg=0,ft=0,st=ok:1
        0;255;3;0;9;TSP:MSG:READ 100-100-0 s=1,c=1,t=0,pt=7,l=5,sg=0:22.8
        0;255;3;0;9;TSP:MSG:READ 100-100-0 s=0,c=1,t=1,pt=7,l=5,sg=0:80.7
        0;255;3;0;9;TSP:SANCHK:OK
        
        SENSOR 2.0.0
        
        Starting sensor (RRNNA-, 2.0.0)
        TSM:INIT
        TSM:RADIO:OK
        TSP:ASSIGNID:OK (ID=100)
        TSM:FPAR
        TSP:MSG:SEND 100-100-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc:
        TSP:MSG:READ 0-0-100 s=255,c=3,t=8,pt=1,l=1,sg=0:0
        TSP:MSG:FPAR RES (ID=0, dist=0)
        TSP:MSG:PAR OK (ID=0, dist=1)
        TSM:FPAR:OK
        TSM:ID
        TSM:CHKID:OK (ID=100)
        TSM:UPL
        TSP:PING:SEND (dest=0)
        TSP:MSG:SEND 100-100-0-0 s=255,c=3,t=24,pt=1,l=1,sg=0,ft=0,st=ok:1
        TSP:MSG:READ 0-0-100 s=255,c=3,t=25,pt=1,l=1,sg=0:1
        TSP:MSG:PONG RECV (hops=1)
        TSP:CHKUPL:OK
        TSM:UPL:OK
        TSM:READY
        TSP:MSG:SEND 100-100-0-0 s=255,c=3,t=15,pt=6,l=2,sg=0,ft=0,st=ok:0100
        !TSP:MSG:SEND 100-100-0-0 s=255,c=0,t=17,pt=0,l=5,sg=0,ft=0,st=fail:2.0.0
        !TSP:MSG:SEND 100-100-0-0 s=255,c=3,t=6,pt=1,l=1,sg=0,ft=1,st=fail:0
        TSP:MSG:READ 0-0-100 s=255,c=3,t=15,pt=6,l=2,sg=0:0100
        TSP:MSG:SEND 100-100-0-0 s=255,c=3,t=11,pt=0,l=22,sg=0,ft=2,st=ok:TemperatureAndHumidity
        !TSP:MSG:SEND 100-100-0-0 s=255,c=3,t=12,pt=0,l=3,sg=0,ft=0,st=fail:1.1
        TSP:MSG:SEND 100-100-0-0 s=0,c=0,t=7,pt=0,l=0,sg=0,ft=1,st=ok:
        TSP:MSG:SEND 100-100-0-0 s=1,c=0,t=6,pt=0,l=0,sg=0,ft=0,st=ok:
        Request registration...
        TSP:MSG:SEND 100-100-0-0 s=255,c=3,t=26,pt=1,l=1,sg=0,ft=0,st=ok:2
        TSP:MSG:READ 0-0-100 s=255,c=3,t=27,pt=1,l=1,sg=0:1
        Node registration=1
        Init complete, id=100, parent=0, distance=1, registration=1
        TSP:MSG:SEND 100-100-0-0 s=1,c=1,t=0,pt=7,l=5,sg=0,ft=0,st=ok:22.8
        T: 22.80
        TSP:MSG:SEND 100-100-0-0 s=0,c=1,t=1,pt=7,l=5,sg=0,ft=0,st=ok:80.8
        H: 80.80
        
        Gateway 2.2.0
        
        
        ÈDpÈtAhÀD´ðCXXüü0;255;3;0;9;238 MCO:BGN:INIT GW,CP=RRNGE---,VER=2.2.0-beta
        0;255;3;0;9;299 TSF:LRT:OK
        0;255;3;0;9;327 TSM:INIT
        0;255;3;0;9;353 TSF:WUR:MS=0
        scandone
        state: 0 -> 2 (b0)
        state: 2 -> 3 (0)
        state: 3 -> 5 (10)
        add 0
        aid 4
        cnt 
        0;255;3;0;9;470 TSM:INIT:TSP OK
        0;255;3;0;9;502 TSM:INIT:GW MODE
        0;255;3;0;9;537 TSM:READY:ID=0,PAR=0,DIS=0
        0;255;3;0;9;582 MCO:REG:NOT NEEDED
        
        connected with N3tw0rk.NET, channel 1
        dhcp client start...
        f r0, scandone
        .....ip:192.168.178.118,mask:255.255.255.0,gw:192.168.178.1
        .IP: 192.168.178.118
        0;255;3;0;9;3682 MCO:BGN:STP
        0;255;3;0;9;3735 MCO:BGN:INIT OK,TSP=1
        pm open,type:2 0
        
        Sensor 2.2.0
        
        
        0 MCO:BGN:INIT NODE,CP=RRNNA---,VER=2.2.0-beta
        4 TSM:INIT
        4 TSF:WUR:MS=0
        8 TSM:INIT:TSP OK
        10 TSM:FPAR
        1228 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
        3237 !TSM:FPAR:NO REPLY
        3239 TSM:FPAR
        4468 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
        6477 !TSM:FPAR:NO REPLY
        6479 TSM:FPAR
        7698 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
        9707 !TSM:FPAR:NO REPLY
        9709 TSM:FPAR
        10928 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
        12937 !TSM:FPAR:FAIL
        12939 TSM:FAIL:CNT=1
        12941 TSM:FAIL:DIS
        12943 TSF:TDI:TSL
        22947 TSM:FAIL:RE-INIT
        22949 TSM:INIT
        22951 TSM:INIT:TSP OK
        22956 TSM:FPAR
        24174 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
        26183 !TSM:FPAR:NO REPLY
        26185 TSM:FPAR
        27404 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
        29413 !TSM:FPAR:NO REPLY
        29415 TSM:FPAR
        30633 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
        32643 !TSM:FPAR:NO REPLY
        32645 TSM:FPAR
        33867 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
        35876 !TSM:FPAR:FAIL
        35878 TSM:FAIL:CNT=2
        35880 TSM:FAIL:DIS
        35883 TSF:TDI:TSL
        45887 TSM:FAIL:RE-INIT
        45889 TSM:INIT
        45891 TSM:INIT:TSP OK
        45895 TSM:FPAR
        47114 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
        49123 !TSM:FPAR:NO REPLY
        49125 TSM:FPAR
        50370 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
        52379 !TSM:FPAR:NO REPLY
        52381 TSM:FPAR
        53600 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
        55609 !TSM:FPAR:NO REPLY
        55611 TSM:FPAR
        56829 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
        58839 !TSM:FPAR:FAIL
        58841 TSM:FAIL:CNT=3
        58843 TSM:FAIL:DIS
        58845 TSF:TDI:TSL
        68849 TSM:FAIL:RE-INIT
        68851 TSM:INIT
        68853 TSM:INIT:TSP OK
        68857 TSM:FPAR
        70076 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
        72085 !TSM:FPAR:NO REPLY
        72087 TSM:FPAR
        73306 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
        75315 !TSM:FPAR:NO REPLY
        75317 TSM:FPAR
        76535 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
        78546 !TSM:FPAR:NO REPLY
        78548 TSM:FPAR
        79767 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
        81776 !TSM:FPAR:FAIL
        81778 TSM:FAIL:CNT=4
        81780 TSM:FAIL:DIS
        81782 TSF:TDI:TSL
        91785 TSM:FAIL:RE-INIT
        91787 TSM:INIT
        91789 TSM:INIT:TSP OK
        91793 TSM:FPAR
        93011 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
        95021 !TSM:FPAR:NO REPLY
        95023 TSM:FPAR
        96241 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
        98250 !TSM:FPAR:NO REPLY
        98252 TSM:FPAR
        99471 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
        101480 !TSM:FPAR:NO REPLY
        101482 TSM:FPAR
        102703 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
        104712 !TSM:FPAR:FAIL
        104714 TSM:FAIL:CNT=5
        104716 TSM:FAIL:DIS
        104718 TSF:TDI:TSL
        114722 TSM:FAIL:RE-INIT
        114724 TSM:INIT
        114728 TSM:INIT:TSP OK
        114731 TSM:FPAR
        115951 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
        117960 !TSM:FPAR:NO REPLY
        117962 TSM:FPAR
        119183 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
        121192 !TSM:FPAR:NO REPLY
        121194 TSM:FPAR
        122443 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
        124452 !TSM:FPAR:NO REPLY
        124454 TSM:FPAR
        125673 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
        127682 !TSM:FPAR:FAIL
        127684 TSM:FAIL:CNT=6
        127686 TSM:FAIL:DIS
        127688 TSF:TDI:TSL
        137691 TSM:FAIL:RE-INIT
        137693 TSM:INIT
        137697 TSM:INIT:TSP OK
        137699 TSM:FPAR
        138919 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
        140929 !TSM:FPAR:NO REPLY
        140931 TSM:FPAR
        142151 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
        144160 !TSM:FPAR:NO REPLY
        144162 TSM:FPAR
        145381 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
        
        
        • The Config is the Standard Config which comes with the Package on Github.

        • The Scripts from above are used to flash the devices.

        • The Gateway on 2.2.0-beta gives only these lines as in Codebox, then, nothing else happens.

        • I have cleaned the EEPROM from the devices with the eeprom clean example in mysensors examples

        1 Reply Last reply
        0
        • scalzS Offline
          scalzS Offline
          scalz
          Hardware Contributor
          wrote on last edited by scalz
          #19

          @Floca
          thx for logs. Logs are always useful ;)

          I tried a few weeks ago rfm69 with atsam, esp32 etc and was working well here.
          So I'll take a look asap. Need to find a wemos to have same setup.

          Note:

          • in your first post, you say that you tried with a nano. But nano is 5v whereas rfm69 is not 5v tolerant. So this can't work.
          • all rfm69 modules works the same. C, W the same. HW and HCW the same too. These are just different package and mapping, that's all. But sure, if using HW, HCW, needs the high power dfine in MySensors (not your case here)
          1 Reply Last reply
          0
          • F Offline
            F Offline
            Floca
            wrote on last edited by Floca
            #20

            Oh, of course, i wrote Nano, my mistake :(

            I use Arduino PRO MINI's 3.3v for my Nodes.

            1 Reply Last reply
            1
            • mfalkviddM Online
              mfalkviddM Online
              mfalkvidd
              Mod
              wrote on last edited by
              #21

              I'll dig out some modules and see if I can reproduce the problem.

              1 Reply Last reply
              0
              • mfalkviddM Online
                mfalkviddM Online
                mfalkvidd
                Mod
                wrote on last edited by
                #22

                @Floca which pins (GPIOxx or Dx) do these correspond to?

                #define MY_RF69_IRQ_PIN 4
                #define MY_RF69_SPI_CS 15
                

                MySensors is not able to initialize the radio, probably due to my wiring not being the same as yours.

                1 Reply Last reply
                0
                • F Offline
                  F Offline
                  Floca
                  wrote on last edited by
                  #23

                  I use this Module...
                  https://www.openhardware.io/view/386/Minimalist-RFM69CW-WeMos-D1-Mini-Shield

                  IRQ=DIO0= GPIO4=D2
                  CS=NSS=GPIO15=D8

                  1 Reply Last reply
                  1
                  • mfalkviddM Online
                    mfalkviddM Online
                    mfalkvidd
                    Mod
                    wrote on last edited by
                    #24

                    I've spent 2 hours and I can't even get gw+node working on 2.0.0.

                    I'll take a break and try to clear my head so I can figure out what is wrong.

                    1 Reply Last reply
                    0
                    • F Offline
                      F Offline
                      Floca
                      wrote on last edited by
                      #25

                      ...on 2.0.0 or on 2.2.0?

                      mfalkviddM 1 Reply Last reply
                      0
                      • F Floca

                        ...on 2.0.0 or on 2.2.0?

                        mfalkviddM Online
                        mfalkviddM Online
                        mfalkvidd
                        Mod
                        wrote on last edited by
                        #26

                        @Floca on 2.0.0.
                        I can't do any troubleshooting unless I know I have a working configuration.

                        Troubleshooting 2.2.0-beta with a configuration that I know is broken on 2.0.0 it totally useless.

                        1 Reply Last reply
                        0
                        • F Offline
                          F Offline
                          Floca
                          wrote on last edited by
                          #27

                          Ok, i know what you mean, that is true.

                          1 Reply Last reply
                          0
                          • F Offline
                            F Offline
                            Floca
                            wrote on last edited by
                            #28

                            I have researched and have found out that an arduino nano as a serial gateway also does not seem to work (same log as above).

                            I hope this helps you a bit.

                            sundberg84S 1 Reply Last reply
                            1
                            • F Floca

                              I have researched and have found out that an arduino nano as a serial gateway also does not seem to work (same log as above).

                              I hope this helps you a bit.

                              sundberg84S Offline
                              sundberg84S Offline
                              sundberg84
                              Hardware Contributor
                              wrote on last edited by
                              #29

                              @Floca - A nano will fry your radio (5v SPI/data lines) but maybe you wrote the wrong mcu?

                              I can comfirm that a RFM69w and Pro Mini 3.3v 8mhz works great on dev branch.

                              im using this code: https://github.com/sundberg84/MySensors2.0.0/blob/master/RFM69gw/Rfm69gw.ino

                              And this hardware: https://forum.mysensors.org/topic/6809/easy-newbie-pcb-rfm69-hw-w-edition-for-mysensors/16

                              Controller: Proxmox VM - Home Assistant
                              MySensors GW: Arduino Uno - W5100 Ethernet, Gw Shield Nrf24l01+ 2,4Ghz
                              MySensors GW: Arduino Uno - Gw Shield RFM69, 433mhz
                              RFLink GW - Arduino Mega + RFLink Shield, 433mhz

                              F 1 Reply Last reply
                              0
                              • sundberg84S sundberg84

                                @Floca - A nano will fry your radio (5v SPI/data lines) but maybe you wrote the wrong mcu?

                                I can comfirm that a RFM69w and Pro Mini 3.3v 8mhz works great on dev branch.

                                im using this code: https://github.com/sundberg84/MySensors2.0.0/blob/master/RFM69gw/Rfm69gw.ino

                                And this hardware: https://forum.mysensors.org/topic/6809/easy-newbie-pcb-rfm69-hw-w-edition-for-mysensors/16

                                F Offline
                                F Offline
                                Floca
                                wrote on last edited by
                                #30

                                @sundberg84 said in RFM69CW Gateway and Nodes are not working with Api newer then 2.0.0:

                                A nano will fry your radio (5v SPI/data lines) but maybe you wrote the wrong mcu?

                                whoops, i forget that, but it still works ^^

                                @sundberg84 said in RFM69CW Gateway and Nodes are not working with Api newer then 2.0.0:

                                I can comfirm that a RFM69w and Pro Mini 3.3v 8mhz works great on dev branch.

                                Seems to be an Gateway problem, because the Sensor waits for the gateway...

                                @sundberg84 said in RFM69CW Gateway and Nodes are not working with Api newer then 2.0.0:

                                im using this code: https://github.com/sundberg84/MySensors2.0.0/blob/master/RFM69gw/Rfm69gw.ino

                                @mfalkvidd doublechecked my script, tht should not be the Problem :(

                                sundberg84S 1 Reply Last reply
                                0
                                • F Floca

                                  @sundberg84 said in RFM69CW Gateway and Nodes are not working with Api newer then 2.0.0:

                                  A nano will fry your radio (5v SPI/data lines) but maybe you wrote the wrong mcu?

                                  whoops, i forget that, but it still works ^^

                                  @sundberg84 said in RFM69CW Gateway and Nodes are not working with Api newer then 2.0.0:

                                  I can comfirm that a RFM69w and Pro Mini 3.3v 8mhz works great on dev branch.

                                  Seems to be an Gateway problem, because the Sensor waits for the gateway...

                                  @sundberg84 said in RFM69CW Gateway and Nodes are not working with Api newer then 2.0.0:

                                  im using this code: https://github.com/sundberg84/MySensors2.0.0/blob/master/RFM69gw/Rfm69gw.ino

                                  @mfalkvidd doublechecked my script, tht should not be the Problem :(

                                  sundberg84S Offline
                                  sundberg84S Offline
                                  sundberg84
                                  Hardware Contributor
                                  wrote on last edited by sundberg84
                                  #31

                                  @Floca which controller do you use ? I have a gw and two sensors working great.

                                  Controller: Proxmox VM - Home Assistant
                                  MySensors GW: Arduino Uno - W5100 Ethernet, Gw Shield Nrf24l01+ 2,4Ghz
                                  MySensors GW: Arduino Uno - Gw Shield RFM69, 433mhz
                                  RFLink GW - Arduino Mega + RFLink Shield, 433mhz

                                  1 Reply Last reply
                                  0
                                  • F Offline
                                    F Offline
                                    Floca
                                    wrote on last edited by
                                    #32

                                    Gateway: Wemos D1 Mini
                                    Nodes: Arduino Pro Mini

                                    sundberg84S 1 Reply Last reply
                                    0
                                    • F Floca

                                      Gateway: Wemos D1 Mini
                                      Nodes: Arduino Pro Mini

                                      sundberg84S Offline
                                      sundberg84S Offline
                                      sundberg84
                                      Hardware Contributor
                                      wrote on last edited by
                                      #33

                                      @Floca good maybe the issue is rfm+vemos but which controller do you use?

                                      Controller: Proxmox VM - Home Assistant
                                      MySensors GW: Arduino Uno - W5100 Ethernet, Gw Shield Nrf24l01+ 2,4Ghz
                                      MySensors GW: Arduino Uno - Gw Shield RFM69, 433mhz
                                      RFLink GW - Arduino Mega + RFLink Shield, 433mhz

                                      1 Reply Last reply
                                      0
                                      • F Offline
                                        F Offline
                                        Floca
                                        wrote on last edited by
                                        #34

                                        Oh you mean which System uses the Data?

                                        I use Fhem.

                                        sundberg84S 1 Reply Last reply
                                        1
                                        • F Floca

                                          Oh you mean which System uses the Data?

                                          I use Fhem.

                                          sundberg84S Offline
                                          sundberg84S Offline
                                          sundberg84
                                          Hardware Contributor
                                          wrote on last edited by
                                          #35

                                          @Floca I'm not familiar with fhem but I guess that controller hands out Id?

                                          Controller: Proxmox VM - Home Assistant
                                          MySensors GW: Arduino Uno - W5100 Ethernet, Gw Shield Nrf24l01+ 2,4Ghz
                                          MySensors GW: Arduino Uno - Gw Shield RFM69, 433mhz
                                          RFLink GW - Arduino Mega + RFLink Shield, 433mhz

                                          1 Reply Last reply
                                          0
                                          Reply
                                          • Reply as topic
                                          Log in to reply
                                          • Oldest to Newest
                                          • Newest to Oldest
                                          • Most Votes


                                          17

                                          Online

                                          11.7k

                                          Users

                                          11.2k

                                          Topics

                                          113.0k

                                          Posts


                                          Copyright 2019 TBD   |   Forum Guidelines   |   Privacy Policy   |   Terms of Service
                                          • Login

                                          • Don't have an account? Register

                                          • Login or register to search.
                                          • First post
                                            Last post
                                          0
                                          • MySensors
                                          • OpenHardware.io
                                          • Categories
                                          • Recent
                                          • Tags
                                          • Popular