@nagelc I have 'define my_debug' in the sketch. I get this (sample) in the log : Do you have any idea ?
....
16 MCO:BGN:INIT NODE,CP=RNNNA---,FQ=16,REL=255,VER=2.3.2
26 TSM:INIT
28 TSF:WUR:MS=0
34 TSM:INIT:TSP OK
36 TSM:FPAR
38 ?TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
2048 !TSM:FPAR:NO REPLY
2050 TSM:FPAR
2052 ?TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
4060 !TSM:FPAR:NO REPLY
4062 TSM:FPAR
4064 ?TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
6072 !TSM:FPAR:NO REPLY
6074 TSM:FPAR
6076 ?TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
8084 !TSM:FPAR:FAIL
8085 TSM:FAIL:CNT=1
8087 TSM:FAIL:DIS
8089 TSF:TDI:TSL
18091 TSM:FAIL:RE-INIT
18093 TSM:INIT
....
And parser gives me (sample) :
34 TSM:INIT:TSP OK Transition to Init state:TSP OK
36 TSM:FPAR Transition to Find Parent state
38 ?TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK: Sent Message without radio ACK
Sender: 255
Last Node: 255
Next Node: 255
Destination: 255
Sensor Id: 255
Command: INTERNAL
Message Type:I_FIND_PARENT_REQUEST
Payload Type: P_STRING
Payload Length: 0
Signing: 0
Failed uplink counter: 0
Status: OK (OK=success, NACK=no radio ACK received)
Payload:
2048 !TSM:FPAR:NO REPLY No potential parents replied to find parent request
