implementing multiple sensors

[epierre]

Hello,

Here is my combo to make a Home Monitoring solution:
https://github.com/empierre/arduino/blob/master/MQv01dgi_1_4.ino

It includes (currently on a Mega):

• Barometer : BMP085
• Temperature + Humidity DHT11
• Particle sensor
• Gas sensors MQ2 MQ6 MQ131 MQ135 TGS2600 2SH12

To be added when stabilized:

• Sound level in DB

Could be added:

• Light sensor
• Vibration sensor
• PIR

[pgo]

Hi guys,

this is a one node with publishing DS temperatures and listening for relay commands I finished and tested yesterday>
https://github.com/pgo-sk/mysensors/blob/master/arduino/DS_and_Relay.ino
feel free to comment/use/publish...

I combined the Dalas and Relay examples together - you have to deactivate the sleep for the relays to listen 100% of time.
MQTT identification on openHAB:
MyMQTT/20/0/V_TEMP - DS sensor(s)
MyMQTT/20/1/V_LIGHT - relay 1
MyMQTT/20/2/V_LIGHT - relay 2

If somebody is interested I can post the maps/items files for openHAB

Regards,
Pego
PS I am working on an home automation system with solar hot air panels control/solar hot water panels and all the common stuff like lights/temperatures/weather etc.. More here: https://github.com/pgo-sk/mysensors/wiki/Home-automation-using-mysensors-and-openHAB

[integlikewhoa]

I'm also following along interested in the Temp, Humidity, and motion sensor.

[Tibus]

@integlikewhoa check this :

http://forum.mysensors.org/topic/404/3-in-1-humidity-temp-and-motion

[pgo]

https://github.com/pgo-sk/mysensors/blob/master/arduino/DS_Light_Relay

• DS18B20 (up to 16 like in original temp sketch)
• TEMT6000 reporting LUX light values
• 2x Relays
  running and tested
  Sensor <-> MQTT gateway <-> openHAB/PC

When interested can post the openHAB items/sitemap(s) settings

Screenshots - over teamviewer, sorry for the quality.

Here the TEMT6000 output - in a quite dark room and changing weather today>

Here the temperature and relays:

Menu:

[Dany]

Has anyone made ​​RGB LED strip node? I am looking for a working example program ...

[blacey]

@Dany - yes. Checkout http://www.mysensors.org/build/dimmer

[korttoma]

Or here is an example I'm using:

https://codebender.cc/sketch:44740

[aquapro]

@pgo said:

When interested can post the openHAB items/sitemap(s) settings

Hi, I'm interested. :-)
Or is this the latest version ?

[pgo]

@aquapro said:

Hi, I'm interested. :-)
Or is this the latest version ?

Yes :), for the sketches mentioned earlier.
<Comment to myself: Have to switch to some versioning as now I am already deeper in the project including cameras, weather forcasts etc.>

[aquapro]

I could not decide yet on a platform. OpenHAB should be my next test.

[pgo]

test1.items
test1.sitemap
test1.rules

webcam.png -icon for webcam - put in openhab/webapps/images

My Current openHAB items/sitemap. 1 multisensor with Temp/Lux/Humidity sensor, 1 ethernet/MQTT gateway.

Also weather forcast from yr.no and Samsung TV remote controls (Mute working, rest not so much)

• openHAB v 1.5.1
• Addons :
  \openhab\addons>
  org.openhab.binding.http-1.5.1.jar
  org.openhab.binding.mqtt-1.6.0-SNAPSHOT.jar
  org.openhab.binding.ntp-1.5.1.jar
  org.openhab.binding.samsungtv-1.6.0-SNAPSHOT.jar
  org.openhab.binding.zwave-1.6.0-SNAPSHOT.jar
  org.openhab.io.habmin-1.6.0-SNAPSHOT.jar
  org.openhab.persistence.exec-1.5.1.jar
  org.openhab.persistence.logging-1.5.1.jar
  org.openhab.persistence.mqtt-1.6.0-SNAPSHOT.jar
  org.openhab.persistence.rrd4j-1.5.1.jar

HABmin conf with graphs:
charts.xml -put in openhab/etc/habmin

In habmin.cfg specify the IP of your MQTT arduino and port>
'#'mqtt:<broker>.clientId=<clientId>
mqtt:mysensor.url=tcp://192.168.1.234:1883
mqtt:mysensor.clientId=MQTT
mqtt:mysensor.qos=0
mqtt:mysensor.retain=true
mqtt:mysensor.async=true

Here some screenshots:





These (Direct channel/Channel/Volume) does not work yet... Mute is OK and Volume displays only the current TV volume.

[pgo]

@aquapro said:

I could not decide yet on a platform. OpenHAB should be my next test.

It runs quit stable on my old WinXP64Pro Quadcore w/many virtual machines on it.
Have still some problems with the syntax of the openHAB settings, but else nice controller ;)

[Dany]

@blacey I tried this already. This is a simple dimmer node, not RGB. It's work fine.
But I would like to use a RGB colorpicker in openhab.

[pgo]

@Dany said:

I would like to use with a RGB colorpicker in openhab.

I would do that soon too. Would you like to have a node only as rgbw dimmer or maybe with a lux sensor as I like to do to also adjust for constant light/lux in the room?

In my menu you can see the setpoint for lux under the light sensor.

[Dany]

@pgo The RGB Colorpicker works already in openhab.
I have some problem in arduino side...i tried update the sample DimmerActuator code, but didn't work. I tried korttoma's code, but it didn't works for me, too.

(e.g. message.header.childId -didn't work)

[pgo]

@Dany said:

@pgo The RGB Colorpicker works already in openhab.
I have some problem in arduino side...i tried update the sample DimmerActuator code, but didn't work. I tried korttoma's code, but it didn't works for me, too.

(e.g. message.header.childId -didn't work)

Can you post the HW connections you use on arduino and the items/sitemap of the dimmer in openHAB? I can then check on my install.

[niccodemi]

I combined Humidity and Lux code. Serial monitor works ok (see below) but for some reason when I try to add node to Vera I get only node, temp and lux (no humidity). I guess something is wrong in combined sketch?

serial monitor

sensor started, id 1
send: 1-1-0-0 s=255,c=0,t=17,pt=0,l=5,st=ok:1.4.1
send: 1-1-0-0 s=255,c=3,t=6,pt=1,l=1,st=ok:0
read: 0-0-1 s=255,c=3,t=6,pt=0,l=1:M
send: 1-1-0-0 s=255,c=3,t=11,pt=0,l=12,st=ok:Humidity/Lux
send: 1-1-0-0 s=255,c=3,t=12,pt=0,l=3,st=ok:1.0
send: 1-1-0-0 s=0,c=0,t=7,pt=0,l=5,st=ok:1.4.1
send: 1-1-0-0 s=1,c=0,t=6,pt=0,l=5,st=ok:1.4.1
send: 1-1-0-0 s=2,c=0,t=16,pt=0,l=5,st=ok:1.4.1
send: 1-1-0-0 s=1,c=1,t=0,pt=7,l=5,st=ok:28.6
T: 28.60
send: 1-1-0-0 s=0,c=1,t=1,pt=7,l=5,st=ok:61.8
H: 61.80
2
send: 1-1-0-0 s=2,c=1,t=23,pt=3,l=2,st=ok:2
2

sketch

#include <SPI.h>
#include <MySensor.h>  
#include <DHT.h> 
#include <BH1750.h>
#include <Wire.h> 

#define CHILD_ID_HUM 0
#define CHILD_ID_TEMP 1
#define CHILD_ID_LIGHT 2
#define HUMIDITY_SENSOR_DIGITAL_PIN 3
#define LIGHT_SENSOR_ANALOG_PIN 0
unsigned long SLEEP_TIME = 30000; // Sleep time between reads (in milliseconds)

BH1750 lightSensor;
MySensor gw;
DHT dht;
float lastTemp;
float lastHum;
boolean metric = true; 
MyMessage msgHum(CHILD_ID_HUM, V_HUM);
MyMessage msgTemp(CHILD_ID_TEMP, V_TEMP);
MyMessage msg(CHILD_ID_LIGHT, V_LIGHT_LEVEL);
uint16_t lastlux;


void setup()  
{ 
  gw.begin();
  dht.setup(HUMIDITY_SENSOR_DIGITAL_PIN); 

  // Send the Sketch Version Information to the Gateway
  gw.sendSketchInfo("Humidity/Lux", "1.0");

  // Register all sensors to gw (they will be created as child devices)
  gw.present(CHILD_ID_HUM, S_HUM);
  gw.present(CHILD_ID_TEMP, S_TEMP);
  gw.present(CHILD_ID_LIGHT, S_LIGHT_LEVEL);
  
  metric = gw.getConfig().isMetric;
  lightSensor.begin();
}

void loop()      
{  
  delay(dht.getMinimumSamplingPeriod());

  float temperature = dht.getTemperature();
  if (isnan(temperature)) {
      Serial.println("Failed reading temperature from DHT");
  } else if (temperature != lastTemp) {
    lastTemp = temperature;
    if (!metric) {
      temperature = dht.toFahrenheit(temperature);
    }
    gw.send(msgTemp.set(temperature, 1));
    Serial.print("T: ");
    Serial.println(temperature);
  }
  
  float humidity = dht.getHumidity();
  if (isnan(humidity)) {
      Serial.println("Failed reading humidity from DHT");
  } else if (humidity != lastHum) {
      lastHum = humidity;
      gw.send(msgHum.set(humidity, 1));
      Serial.print("H: ");
      Serial.println(humidity);
  }     
  uint16_t lux = lightSensor.readLightLevel();// Get Lux value
  Serial.println(lux);
  if (lux != lastlux) {
      gw.send(msg.set(lux));
      lastlux = lux;
  }
  

  gw.sleep(SLEEP_TIME); //sleep a bit
}

[pgo]

@niccodemi Check:
gw.send(msgTemp.set(temperature, 1));
gw.send(msgHum.set(humidity, 1));
gw.send(msg.set(lux)); I miss here ",1"

[niccodemi]

@pgo thanks, all sensors show up now.