Safe In-Wall AC to DC Transformers??

[dbemowsk]

Someone here had passed the TSP-05 over to someone to review. I think they had asked one of the guys that did reviews of the HLK-PM01. Has anyone got a link to a review on these or can give their thoughts after using one?
https://www.aliexpress.com/item/TSP-05-replace-HLK-PM01-AC-DC-220V-to-5V-mini-power-supply-module-intelligent-household/32717871230.html?spm=2114.12010108.1000013.3.NDXqMR&scm=1007.13339.33317.0&pvid=e2a30af8-7732-428d-9a22-9a5def1f73cd&tpp=1

[DavidZH]

@ferro I've looked into thos Vigortonix devices. Those are nice! Unfortunately they're bigger than the HLK's.

But for the dimmer designers under us: they have miniature power supplies with built-in zero cross detectors! Looks very interesting!

[dpressle]

what do you guys say about this PSU? i really liked that the mains are separated much more then the HLK.
And how is the suggested full circuit use they have:

[ksya]

Is using a genuine HLK-PM01 safe when directly connected to mains? I see here that they used extra components for safety.

[MiKa]

Hi,
Varistor and fuse is always good to use as a protection ;)
Its lot of cases of start the fire in house from cheap AC/DC converters.
Regards,
MiKa

[dbemowsk]

I have not only been adding a standard 0.75 amp fuse and MOV in my projects, but a thermal fuse also for added protection. I have been finding the thermal fuses a bit hard to work with as I have burned out a couple just with the heat of the soldering iron. They are good added protection though.

[dbemowsk]

I find it crazy that in all the googling I have been doing on these, I have not found ONE review of how well they work or don't. The claim is that they are a replacement for the HLK-PM01 modules.

[Yveaux]

@dbemowsk said in Safe In-Wall AC to DC Transformers??:

I have not found ONE review of how well they work or don't.

How good is your Russian? https://youtu.be/qnk4jksXdO4

[dbemowsk]

@Yveaux I skipped that class in grade school......LOL

[alexsh1]

@dbemowsk this is a good review - go ahead and try them

[dbemowsk]

@alexsh1 Thanks, they are a bit cheaper than the HLK-PM01s and they appear to be a pin compatible replacement for them.

[Pete357]

Hi all,

I have used MEAN WELL IRM-10-5, 5V/2A/10W for some of my projects, since they were available in my local store. They are ok, robust, good quality.
But as they are much bigger, 10W and cost me 7,5 EUR per piece I wanted to try HLKs for some projects.
This was my 1st order of HLKs. As I had no experience and wanted to avoid fakes I used ebay link from Power Sources at MySensors Store, this one:
http://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&pub=5574962087&toolid=10001&campid=5337834143&customid=nodebb&mpre=http%3A%2F%2Fwww.ebay.com%2Fitm%2F261985573055
BTW it is the same seller and store as mentioned by some other members here on forum.

I was impatiently waiting for them. Finally yeasterday (after 3 weeks) I found the package on my desk. First look when I unpacked it indicates something is not ok. Came back to this thread to see how to check the fakes ... unpleasant findings ... poor enclosure, thinner pins, every at different lenghts, non blocking mechanism on pins, no quality labels, no bar codes, no dot mark on top, different markings on top...
These ones look much worse as I could even expect from fakes:

Please can somebody more experienced with HLKs recommend really reliable source where to buy the right modules?

Thanks
Pete

[ferro]

@Pete357 said in Safe In-Wall AC to DC Transformers??:

Please can somebody more experienced with HLKs recommend really reliable source where to buy the right modules?

To be sure you get genuine module buy it directly from the vendor:
http://www.hlktech.net/product.php?CateId=10

[Pete357]

@ferro Thank you, didnt know they have own eshop. I should have been looking for it before.
I suggest to put this link into MySensors Store instead of that ebay link, for others looking where to buy it and not to make the same mistake as I did.

Thanks
Pete

[Nca78]

Very ugly modules indeed, I'm not familiar with ebay but you should have some sort of buyer protection ?
I could easily get money back on Aliexpress with mines that were looking better, so on ebay it should not be a problem.

[dbemowsk]

@Pete357 I had an issue with some modules that I bought that were not packed well. When they arrived, I had one or two that had at least one pin bent nearly all the way over. Some had case damage that was slight, but still usable. I contacted the seller and got half my money back. I tested all the modules and they all functioned properly. I use MOVs and fuses on the input power, so I figure I should be pretty protected in the event of a failure. I am not pushing them anywhere near the limits either. Do what you feel is necessary for your case though.

[hek]

Ok, removed the ebay link from the buying guide. If someone finds an alternative ebay seller with genuine modules, let me know.

[dbemowsk]

Sorry, I didn't mean to imply that I bought them from that link. Never the less, it sounds like those are not genuine.

[matz]

Hi Guys,

What a huge topic :)

Has anyone tested this 3,2 $ module ? Do you think it is safe to put it in the wall socket ?

AC-DC Isolated AC 110V / 220V To DC 5V 600mA Constant Voltage Switch Power Supply Converter Module

In the comments on guy disassembled it :

Regards

Matz

[korttoma]

@matz why not use the HLK-PM01 that is known to be safe?

http://www.hlktech.net/product_detail.php?ProId=54