💬 MySensors node
openhardware.io last edited by openhardware.io
fets last edited by
@Anticimex congrats for your design.
I would like to order version 1.1. Did you manage to check hardware ?
@fets So far, I have only built the 5x5 board (but the others should be schematically identical). The only issue I have found so far is that I cannot get the ISP port to work. But I have checked and I have an identical setup on the 1.0 board and that worked, so I suspect the programmer is too weak to drive the net on this one. So it is not a board-issue per se, and might only be an issue on the 5x5 board as routing is the most complex on that one due to the size.