MySensors 1.4 Released

[RJ_Make]

@hek
Will do, Thanks

[epierre]

@hek I corrected the post above... still the android template problem when posting...

[hek]

@epierre said:

In the Vera LUA I only see TIME as a new event, right ?

TIME was present already in 1.3 (https://github.com/mysensors/Vera/compare/1.3...master)

given the limited write cycle, I guess I wouldn't want to use the EEPROM for storing states. But if my watermeter starts but cannot get the reference volume, that would mean a mess if that persist, could the sensor loop on startup to get the data, but anyway manage reading the status of the sensor ?

Guess you could implement it with some inspiration from my example above where you instead keep requesting watermeter level until you get a response. Meanwhile you can save watermeter values and add it to the grand total when response comes in.

[epierre]

@hek In what case should I use the ack ?

[hek]

@epierre

If you really want to make sure your sensor data has reached the gateway (or the other way around).

In the vera plugin the state isn't changed until ack comes back from actuator. So user get instant feedback if there is some problem in communication (=nothing updates in GUI).

[BulldogLowell]

@hek

Congratulations

[hek]

###1.4 update 1 released

NOTE: This release does not require you to update all nodes . Nothing has changed in protocols.

• All outgoing messages from gateway included a newline character. This has now been fixed.
• The msg.getByte() wrongfully used atoi() conversion if payload was of string type.
• The getByte-bug caused problems when receiving Metric/Imperial settings from controller.
• A new sleep-method added to allow wake-up on both external interrupts.
• A new example BinarySwitchSleepSensor showing the new sleep function (thanks @Anticimex).
• Library code (RF24) reduced by 624 bytes (thanks @Damme)
• Many people has reported powering problems when using amplified version of the NRF-chip on their gateway. The Arduino Nanos 3v3 output does not seem to be sufficient for PA_MAX. The radio needs to be feeded separately with a stable 3v3 to work. Defaulting gateway PA-level to LOW now and if you are using a vanilla radio on gateway you can switch back to MAX in your MyConfig.h.

[epierre]

This post is deleted!

[mikeones]

@hek I am having an issue assigning a node ID since the last update. I have cleared the eprom in one of my nodes and I am trying to assign a node id of 1 via the serial monitor on the GW. I am sending "255;255;3;0;4;1" in response to the node ID request of "255;255;3;0;3;".

This is the console log from the node with debug enabled.

send: 255-255-255-255 s=255,c=3,t=7,pt=0,l=0,st=fail:
read: 0-0-255 s=255,c=3,t=8,pt=1,l=1:0
new parent=0, d=1
req node id
send: 255-255-0-0 s=255,c=3,t=3,pt=0,l=0,st=ok:
read: 0-0-255 s=255,c=3,t=4,pt=0,l=1:1
id=49
sensor started, id 49
send: 49-49-0-0 s=255,c=0,t=17,pt=0,l=3,st=ok:1.4
send: 49-49-0-0 s=255,c=3,t=6,pt=1,l=1,st=ok:0

Here is the console log from the GW.

0;0;3;0;14;Gateway startup complete.
255;255;3;0;3;
49;255;0;0;17;1.4
49;255;3;0;6;0

What I don't understand is why the node would get assigned ID "49" when I sent "1" as the new node ID. Should the node get an ID of "1" or "49" for the command below?

255;255;3;0;4;1

[hek]

@mikeones

Darn, yes, you are so right. The getByte fix affected the node-id functionality. Please update again (MySensor.cpp) and report back.

[mikeones]

@hek After updating, I have tested this via the serial monitor and it seems ok.

send: 255-255-0-0 s=255,c=3,t=3,pt=0,l=0,st=fail:
read: 0-0-255 s=255,c=3,t=4,pt=0,l=1:1
id=1

When I send this string via a (ago) controller, the node sets an id of 0 again. Do you see any issue with this string format?

255;255;3;0;4;1

Serial monitor output. Does "l=0:" indicate there was an issue with the payload?

send: 255-255-255-0 s=255,c=3,t=3,pt=0,l=0,st=fail:
read: 0-0-255 s=255,c=3,t=4,pt=0,l=0:
id=0

[hek]

@mikeones

Hmm. I wonder which control characters Argcontrol sends ( \n and/or \r ). It could be that Vera sends both. I'll have to check when I get home.

[mikeones]

@hek

It appears sending "255;255;3;0;4;1\r\n" fixes my issue.

send: 255-255-255-0 s=255,c=3,t=3,pt=0,l=0,st=fail:
read: 0-0-255 s=255,c=3,t=4,pt=0,l=1:1
id=1
sensor started, id 1

[hek]

@mikeones

Ok thanks. I will make this more robust. It should be ok to skip the carriage return character.

[mikeones]

What does st=fail represent? Is that stating the ack failed or sending failed? Would this error show up for all messages if debug is enabled on the sensor node and not the gateway.? Maybe this is a non issue? I am trying to confirm if gw.getConfig and gw.requestTime requests are reaching the GW since they don't seem to be set consistently in my environment.

sensor started, id 3
send: 3-3-0-0 s=255,c=0,t=17,pt=0,l=3,st=fail:1.4
send: 3-3-0-0 s=255,c=3,t=6,pt=1,l=1,st=fail:0
send: 3-3-0-0 s=255,c=3,t=11,pt=0,l=8,st=ok:Humidity
send: 3-3-0-0 s=255,c=3,t=12,pt=0,l=3,st=ok:1.0
send: 3-3-0-0 s=0,c=0,t=7,pt=0,l=3,st=fail:1.4
send: 3-3-0-0 s=1,c=0,t=6,pt=0,l=3,st=fail:1.4
send: 3-3-0-0 s=1,c=1,t=0,pt=7,l=5,st=fail:25.8
T: 25.80
send: 3-3-0-0 s=0,c=1,t=1,pt=7,l=5,st=fail:50.4
H: 50.40
send: 3-3-0-0 s=1,c=1,t=0,pt=7,l=5,st=fail:25.8
T: 25.80
send: 3-3-0-0 s=0,c=1,t=1,pt=7,l=5,st=fail:50.4
H: 50.40

[RJ_Make]

@hek said:> ###1.4 update 1 released

NOTE: This release does not require you to update all nodes . Nothing has changed in protocols.

• All outgoing messages from gateway included a newline character. This has now been fixed.
• The msg.getByte() wrongfully used atoi() conversion if payload was of string type.
• The getByte-bug caused problems when receiving Metric/Imperial settings from controller.
• A new sleep-method added to allow wake-up on both external interrupts.
• A new example BinarySwitchSleepSensor showing the new sleep function (thanks @Anticimex).
• Library code (RF24) reduced by 624 bytes (thanks @Damme)
• Many people has reported powering problems when using amplified version of the NRF-chip on their gateway. The Arduino Nanos 3v3 output does not seem to be sufficient for PA_MAX. The radio needs to be feeded separately with a stable 3v3 to work. Defaulting gateway PA-level to LOW now and if you are using a vanilla radio on gateway you can switch back to MAX in your MyConfig.h.

Was this release supposed to fix the C to F conversion problem I've been having? I just updated and problem persists for me.

[hek]

@ServiceXp
Think I found the config problem. No wonder it didn't work. Please download and try again.

@mikeones
You should now be able to omit carriage return now.
The fail you're seeing is for the inter-node-ack.
Just verified requesting time from controller and it seems to work fine here (using the example sketch).

[Yveaux]

@hek When MySensors has no parent, or fails to contact parent for a number of times, the findParentNode() method is entered.
This sends a broadcast (ignoring the result) and then waits at most 2 seconds for a response.
When this response doesn't come, the sensor just carries on as if the parent has been found, sending messages until again a number of times it failed to contact the parent.

Shouldn't findParentNode() either block until the parent has been found (maybe not desirable for battery based nodes) or only reset the failedTransmissions counter when a succesful response from the parent has been received?

[hek]

@Yveaux said:

Shouldn't findParentNode() either block until the parent has been found (maybe not desirable for battery based nodes) or only reset the failedTransmissions counter when a succesful response from the parent has been received?

Blocking is as you say a bad idea for battery sensors (1.3 had this problem resulting in drained batteries).

How would it help to reset failedTransmissions?

[hek]

@Yveaux

BTW. Do you have any idea why this happens?

http://forum.mysensors.org/topic/347/1-4-error-compiling-with-pinchangeint-h-library-file/5

I can't explain why linker includes things from MyGateway.cpp when compiling sensor examples.