RFM69HW serial output no data

[Sweebee]

My gateway receives this:

0;0;3;0;9;read: 1-1-0 s=1,c=3,t=16,pt=0,l=0,sg=0:

while it should receive?

0;0;3;0;9;read: 1-1-0 s=1,c=3,t=16,pt=0,l=0,sg=0:1

My sketch:

#include <SPI.h>
#include <MySensor.h>
#include <MyTransportRFM69.h>
#include <MySigningAtsha204Soft.h>

#define NODE_ID 1

#define PIN_G 4
#define PIN_O 5
#define PIN_R 6

int sentG = 1;
int sentO = 1;
int sentR = 1;

//Construct MySensors library
MyHwATMega328 hw;
MyMessage groen(1, V_TRIPPED);
MyMessage oranje(2, V_TRIPPED);
MyMessage rood(3, V_TRIPPED);
MyTransportRFM69 transport;
MySensor gw(transport, hw);


/**************************************************************************************/
/* Initialization                                                                     */
/**************************************************************************************/
void setup()
  {
    
    pinMode(PIN_G, INPUT);
    digitalWrite(PIN_G, HIGH);
    pinMode(PIN_O, INPUT);
    digitalWrite(PIN_O, HIGH);
    pinMode(PIN_R, INPUT);
    digitalWrite(PIN_R, HIGH);
    
    gw.begin(NULL, NODE_ID, false);
  }

/**************************************************************************************/
/* Main loop                                                                          */
/**************************************************************************************/
void loop(){  
  
  // GROENE KNOP
  int valueG = digitalRead(PIN_G); 
    if (valueG != sentG) {
      Serial.println("GROEN");
      gw.send(groen.set(1));
      sentG = valueG;
  }

  // ORANJE KNOP
  int valueO = digitalRead(PIN_O); 
  if (valueO != sentO) {
    Serial.println("ORANJE");
    gw.send(oranje.set(1));
    sentO = valueO;
  }

  // RODE KNOP
  int valueR = digitalRead(PIN_R); 
  if (valueR != sentR) {
    Serial.println("ROOD");
    gw.send(rood.set(1));
    sentR = valueR;
  }
  
}

[martinhjelmare]

@Sweebee

The serial output you've received is an internal message about signing nonce.

You don't present the sensors in setup, which is why you don't see any more output, about sensors tripping.

See:
http://www.mysensors.org/download/sensor_api_15

and
http://www.mysensors.org/download/serial_api_15

and
http://forum.mysensors.org/topic/666/debug-faq-and-how-ask-for-help/3

[Sweebee]

Yes thanks, totally forgot that.