Issue with temperature units

[hek]

@Yveaux

uint8_t MyMessage::getByte() const {
	if (miGetPayloadType() == P_BYTE) {
		return data[0];
	} else if (miGetPayloadType() == P_STRING) {
		return atoi(data);
	} else {
		return 0;
	}
}

Payload type will be P_STRING when controller sends the data. Yes, why does it get size 2?!

[hek]

Hmm.. we should probably not use atoi in case of String. Payload type should not matter in the getByte.

[hek]

Yep, this is a bug.

I've also found that the newline character is included and transmitted on all outgoing messages from gateway! So payload length 2 was correct, and wrong ;)

How is it possible no one has seen this before (me included)?

[jocke4u]

Sounds good anyway....one bug less :)
I just setup a sensor with DHT22/AM2302 and get the same results here.

[hek]

Fix checked in. I'm creating a more comprehensive release note in the 1.4 thread.

[Yveaux]

@hek said:

How is it possible no one has seen this before (me included)?

At least I saw it ;-)
I personally tend to read over all the details in the serial api... This time I noticed.

Be glad you nailed it!

[jocke4u]

Thanks @hek and @Yveaux I can confirm it's working on both Dallas sensor and DHT22.
Great support!!

[Nuubi]

Hmmm... how can one override this statement to be METRIC?
float temperature = static_cast<float>(static_cast<int>((gw.getConfig().isMetric?TemperatureSensors.getTempCByIndex(CHILD_ID_TEMPERATURE_FIRST+i):TemperatureSensors.getTempFByIndex(CHILD_ID_TEMPERATURE_FIRST+i)) * 10.)) / 10.;

[hexenmeister]

hello,

I must confess I have not read this thread completely. Too much for my bad english)

We try MySensors support for FHEM (www.fhem.de) to impementieren. I noticed that when the I_CONFIG message is answered correctly with 'M' for metric, then the sensor sends in Imperial. Is not surprising, everything is interpreted as a string from Gateway, but also byte checked. My solution proposal: In MySensors.cpp:
(isMetric = msg.getString()[0] == 'M' ; instead of isMetric = msg.getByte() == 'M' ;)

			} else if (type == I_CONFIG) {
				// Pick up configuration from controller (currently only metric/imperial)
				// and store it in eeprom if changed
				//isMetric = msg.getByte() == 'M' ;
				isMetric = msg.getString()[0] == 'M' ;
				if (cc.isMetric != isMetric) {
					cc.isMetric = isMetric;
					eeprom_write_byte((uint8_t*)EEPROM_CONTROLLER_CONFIG_ADDRESS, isMetric);
					//eeprom_write_block((const void*)&cc, (uint8_t*)EEPROM_CONTROLLER_CONFIG_ADDRESS, sizeof(ControllerConfig));
				}
			} else if (type == I_CHILDREN) {

Best regards,

Alexander

[hek]

Welcome @hexenmeister!

What version of MySensors library did you download? The current version in gihub/master already has getString()[0].

[hexenmeister]

Thanks for the quick reply.
I've downloaded the source here: https://github.com/mysensors/CodeBender/blob/master/MySensor.cpp
Since it is still old.

Now I see that https://github.com/mysensors/Arduino/blob/master/libraries/MySensors/MySensor.cpp would be better.

[hek]

Oh.. you downloaded from codebender. That explains it.

Unfortunately it's still a bit too messy to update the public libraries over there (have to contact the codebender-people every time). Nowadays we keep a copy among in the MySensors-account which gets copied if you clone one of the examples.

Github always contains the latest.

[hexenmeister]

My mistake. Was unfortunately cost few hours time for the search. For that I have won something overview in MySensors Code :)