UI5 Mysensors library 2.0 gateway issues
-
thanks so much, I am becoming a pro at this, one day YOU will come to me for questions lol.
-
@hek said:
senile
are the the sensors/nodes awake at all times by default? -
I had started a different thread that relates to this one and wasn't getting much for response, In my digging on the issue, I found this thread.
I have owned my new Vera Plus for over a week now and I cannot get my sensors communicating with Vera. I am running UI7 I believe, and I have my gateway built with a pro mini and an Easy Newbie board from OpenHardware.IO. I appear to be getting communication from nodes over the gateway according to what I am seeing in the log, but I am not able to include my sensors. CLearly, when I press start and stop, inclusion mode is starting and stopping as I see it in the logs. My issue though goes back to a post in this thread from 5 months ago where he addresses an issue with incomming commands being discarded. Here is a snippet from my log that shows the process:
I posted as an image so you can better see the highlighting. For my TemperatureAndHumidity node, I have manually set the node ID to 84 as can be seen in the logs. The 3 lines in yellow look to me to be the sensor attempting to present itself, but the presentation messages are being discarded. I have seen this both with my humidity sensor node and my garage door sensor node. In the post I referred to from 5 months ago from BartE, he linked to the development version of the plugin, so I even tried that. The log snippet shown above is from the development branch plugin. I was originally using the UI7 branch linked in the Vera how-to setup guide on the website. This had a bit of a different look, but the logs looked the same when I would attempt inclusion.It is getting a bit discouraging since I have owned the controller for over a week now and I can't get the MySensors part working, which is mainly why I got it. If it means anything, I had my gateway and sensors working in Domoticz.
You guys have been GREAT so far, so any help is appreciated.
-
@hek, thanks for the quick reply.
You say "This message appears when a none included node receives data." but the only time I see those yellow lines is when I present the node.I see under the last discarded command:
50 12/27/16 9:12:38.441 luup_log:10: Arduino: Log: TSP:MSG:READ 84-84-0 s=0,c=0,t=7,pt=0,l=0,sg=0: <0x73e23520> 50 12/27/16 9:12:38.443 luup_log:10: Arduino: Presentation: 84;0;0;0;7; <0x73e23520> 50 12/27/16 9:12:38.446 luup_log:10: Arduino: Log: TSP:MSG:READ 84-84-0 s=1,c=0,t=6,pt=0,l=0,sg=0: <0x73e23520> 50 12/27/16 9:12:38.448 luup_log:10: Arduino: Presentation: 84;1;0;0;6; <0x73e23520>The two TSP:MSG:READ lines contain c=0. Is this what you were referring to?
-
Thanks @hek for chipping in an looking at the problem @dbemowsk is experiencing. This is really beyond my knowledge an I cannot understan why it is not working. I am running the latest UI7 firmware on my Veralite test device, am I cannot reproduce this issue. Including MySensor devices is no problem even if I use static node adress.
-
So I cleared the eeprom and re-uploaded the humidity sensor sketch. Had to rebuild it from the example because the arduino IDE crashed and erased it. That has happened to me a couple times now since starting with the IDE. This is with debug turned on and viewing the serial monitor. To me it looks like it fails to get an ID from Vera. This is what I was seeing before which was why I manually assigned the ID.
Starting sensor (RNNNA-, 2.0.0) TSM:INIT TSM:RADIO:OK TSM:FPAR TSP:MSG:SEND 255-255-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc: TSM:FPAR TSP:MSG:SEND 255-255-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc: TSP:MSG:READ 0-0-255 s=255,c=3,t=8,pt=1,l=1,sg=0:0 TSP:MSG:FPAR RES (ID=0, dist=0) TSP:MSG:PAR OK (ID=0, dist=1) TSM:FPAR:OK TSM:ID TSP:MSG:SEND 255-255-0-0 s=255,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=ok: TSM:ID TSP:MSG:SEND 255-255-0-0 s=255,c=3,t=3,pt=0 l=0,sg=0,ft=0,st=ok: TSM:ID TSP:MSG:SEND 255-255-0-0 s=255,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=ok: TSM:ID TSP:MSG:SEND 255-255-0-0 s=255,c=3,t=3,pt=0,l=0,sg=0,ft=0,st=ok: !TSM:CHKID:FAIL (ID=255) !TSM:FAILURE TSM:PDTThis is the Vera log from start to stop inclusion with the node trying to get an ID. Here I see no c=0 or presentation entries.
,l=0,sg=0: <0x73e23520> 50 12/27/16 12:24:41.287 luup_log:10: Arduino: Sending: 255;255;3;0;4;255 <0x73e23520> 08 12/27/16 12:24:42.769 JobHandler_LuaUPnP::HandleActionRequest device: 10 service: urn:upnp-arduino-cc:serviceId:arduino1 action: StartInclusion <0x73c23520> 08 12/27/16 12:24:42.770 JobHandler_LuaUPnP::HandleActionRequest argument DeviceNum=10 <0x73c23520> 08 12/27/16 12:24:42.770 JobHandler_LuaUPnP::HandleActionRequest argument serviceId=urn:upnp-arduino-cc:serviceId:arduino1 <0x73c23520> 08 12/27/16 12:24:42.770 JobHandler_LuaUPnP::HandleActionRequest argument action=StartInclusion <0x73c23520> 50 12/27/16 12:24:42.772 luup_log:10: Arduino: Sending: 0;0;3;0;5;1 <0x779ea320> 04 12/27/16 12:24:42.774 <0x779ea320> 50 12/27/16 12:24:43.305 luup_log:10: Arduino: Log: TSP:MSG:READ 255-255-0 s=255,c=3,t=3,pt=0,l=0,sg=0: <0x73e23520> 50 12/27/16 12:24:43.307 luup_log:10: Arduino: Sending: 255;255;3;0;4;255 <0x73e23520> 50 12/27/16 12:24:45.325 luup_log:10: Arduino: Log: TSP:MSG:READ 255-255-0 s=255,c=3,t=3,pt=0,l=0,sg=0: <0x73e23520> 50 12/27/16 12:24:45.327 luup_log:10: Arduino: Sending: 255;255;3;0;4;255 <0x73e23520> 50 12/27/16 12:24:51.308 luup_log:10: Arduino: Log: TSP:MSG:READ 255-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0: <0x73e23520> 50 12/27/16 12:24:51.310 luup_log:10: Arduino: Log: TSP:MSG:BC <0x73e23520> 50 12/27/16 12:24:51.314 luup_log:10: Arduino: Log: TSP:MSG:FPAR REQ (sender=255) <0x73e23520> 50 12/27/16 12:24:51.316 luup_log:10: Arduino: Log: TSP:CHKUPL:OK <0x73e23520> 50 12/27/16 12:24:51.319 luup_log:10: Arduino: Log: TSP:MSG:GWL OK <0x73e23520> 50 12/27/16 12:24:52.259 luup_log:10: Arduino: Log: TSP:MSG:SEND 0-0-255-255 s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=bc:0 <0x73e23520> 50 12/27/16 12:24:53.331 luup_log:10: Arduino: Log: TSP:MSG:READ 255-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0: <0x73e23520> 50 12/27/16 12:24:53.332 luup_log:10: Arduino: Log: TSP:MSG:BC <0x73e23520> 50 12/27/16 12:24:53.334 luup_log:10: Arduino: Log: TSP:MSG:FPAR REQ (sender=255) <0x73e23520> 50 12/27/16 12:24:53.339 luup_log:10: Arduino: Log: TSP:CHKUPL:OK (FLDCTRL) <0x73e23520> 50 12/27/16 12:24:53.340 luup_log:10: Arduino: Log: TSP:MSG:GWL OK <0x73e23520> 50 12/27/16 12:24:54.252 luup_log:10: Arduino: Log: TSP:MSG:SEND 0-0-255-255 s=255,c=3,t=8,pt=1,l=1,sg=0,ft=0,st=bc:0 <0x73e23520> 50 12/27/16 12:24:57.369 luup_log:10: Arduino: Log: TSP:MSG:READ 255-255-0 s=255,c=3,t=3,pt=0,l=0,sg=0: <0x73e23520> 50 12/27/16 12:24:57.370 luup_log:10: Arduino: Sending: 255;255;3;0;4;255 <0x73e23520> 50 12/27/16 12:24:59.388 luup_log:10: Arduino: Log: TSP:MSG:READ 255-255-0 s=255,c=3,t=3,pt=0,l=0,sg=0: <0x73e23520> 50 12/27/16 12:24:59.390 luup_log:10: Arduino: Sending: 255;255;3;0;4;255 <0x73e23520> 50 12/27/16 12:25:01.408 luup_log:10: Arduino: Log: TSP:MSG:READ 255-255-0 s=255,c=3,t=3,pt=0,l=0,sg=0: <0x73e23520> 50 12/27/16 12:25:01.410 luup_log:10: Arduino: Sending: 255;255;3;0;4;255 <0x73e23520> 50 12/27/16 12:25:13.497 luup_log:10: Arduino: Log: TSP:MSG:READ 255-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0: <0x73e23520> 50 12/27/16 12:25:13.499 luup_log:10: Arduino: Log: TSP:MSG:BC <0x73e23520> 50 12/27/16 12:25:13.503 luup_log:10: Arduino: Log: TSP:MSG:FPAR REQ (sender=255) <0x73e23520> 50 12/27/16 12:25:13.505 luup_log:10: Arduino: Log: TSP:CHKUPL:OK <0x73e23520> 50 12/27/16 12:25:13.507 luup_log:10: Arduino: Log: TSP:MSG:GWL OK <0x73e23520> 08 12/27/16 12:25:13.563 JobHandler_LuaUPnP::HandleActionRequest device: 10 service: urn:upnp-arduino-cc:serviceId:arduino1 action: StopInclusion <0x74423520> 08 12/27/16 12:25:13.564 JobHandler_LuaUPnP::HandleActionRequest argument DeviceNum=10 <0x74423520> 08 12/27/16 12:25:13.564 JobHandler_LuaUPnP::HandleActionRequest argument serviceId=urn:upnp-arduino-cc:serviceId:arduino1 <0x74423520> 08 12/27/16 12:25:13.564 JobHandler_LuaUPnP::HandleActionRequest argument action=StopInclusion <0x74423520> 50 12/27/16 12:25:13.565 luup_log:10: Arduino: Sending: 0;0;3;0;5;0 <0x779ea320> 04 12/27/16 12:25:13.567 <0x779ea320>I am not sure what to do next.
-
Hmm.. it looks like your Vera is sending out id 255.. (
255;255;3;0;4;255) which usually means that all ids has been used up.https://github.com/mysensors/Vera/blob/development/L_Arduino.lua#L299
The table of used ids is build during plugin startup.. here:
https://github.com/mysensors/Vera/blob/development/L_Arduino.lua#L686I have no idea why this get filled up (or why the plugin thinks so..) when you don't have any child devices to your gateway.
-
Hmm.. it looks like your Vera is sending out id 255.. (
255;255;3;0;4;255) which usually means that all ids has been used up.https://github.com/mysensors/Vera/blob/development/L_Arduino.lua#L299
The table of used ids is build during plugin startup.. here:
https://github.com/mysensors/Vera/blob/development/L_Arduino.lua#L686I have no idea why this get filled up (or why the plugin thinks so..) when you don't have any child devices to your gateway.
@hek Is there any way for me to debug what is happening with the availableIds[i] array? or at least finding where it is stored and clearing it? If not, maybe I'll try restoring my unit to default and try again. I am assuming that would clear the availableIds array. The only thing I currently have set up on the unit is my 1-Wire temp sensors, and there is only 7 of them. I can rebuild those easy enough.
-
Well, it iterates over all vera devices (
luup.devices) and checks if anyone is has the current device as parent... which means it is a child device.For each child device it adds it to the array. The problem here is that it shouldn't find any child devices.. thus the availableIds should all be filled with false.
Maybe you could add some debug logging in the section I pointed out to see what kind of devices it picks up?
-
I am more than interested in trying, I just need a little guidance on how to do that.
In the nextAvailiableRadioId() function I could do the following before it searches for an ID, I am just not sure what code to use to find out what device is defined for that ID.
for i=1,255 do if (availableIds[i] == false) then --add code to log what device is holding this spot end end -
It might be more interesting if you'd add some logging in this area, which should appear in the log when you reload the luup engine:
https://github.com/mysensors/Vera/blob/development/L_Arduino.lua#L682-L687v contains the device. See what it contains under "variable: devices" here:
http://wiki.micasaverde.com/index.php/Luup_Lua_extensions -
OK, so here is what I did:
-- build an lookup table for child device ids (altid -> id) local lastDev = 0 for k, v in pairs(luup.devices) do -- for debugging only remove for production run for k2, v2 in pairs(v) do if (k ~= lastDev) then luup.log("Device #" .. k .. ":" .. k2 .. "=" .. tostring(v2)) else luup.log(" " .. k2 .. "=" .. tostring(v2)) end lastDev = k end -- end debugging -- if I am the parent device if v.device_num_parent == ARDUINO_DEVICE then childIdLookupTable[v.id] = k local split = v.id:split(";") local radioId = tonumber(split[1]) availableIds[radioId] = false; end endI did this to show me every attribute of every device that the system sees. After the luup engine restarts, I get this in the logs:
50 12/27/16 15:58:48.117 luup_log:19: Initialising One Wire Server <0x76be5520> 50 12/27/16 15:58:48.221 luup_log:27: Arduino plugin: loading library L_Arduino ... <0x76be5520> 50 12/27/16 15:58:48.239 luup_log:27: Arduino plugin: library L_Arduino loaded <0x76be5520> 50 12/27/16 15:58:48.239 luup_log:27: Arduino: urn:upnp-arduino-cc:serviceId:arduino1,PluginVersion, 1.5, 27 <0x76be5520> 50 12/27/16 15:58:48.239 luup_log:27: Arduino: Trying for a serial connection <0x76be5520> 50 12/27/16 15:58:48.240 luup_log:27: Arduino: Serial port is connected <0x76be5520> 50 12/27/16 15:58:48.240 luup_log:27: Arduino: Baud is 115200 <0x76be5520> 50 12/27/16 15:58:48.240 luup_log:27: Device #1:mac= <0x76be5520> 50 12/27/16 15:58:48.241 luup_log:27: category_num=19 <0x76be5520> 50 12/27/16 15:58:48.241 luup_log:27: description=ZWave <0x76be5520> 50 12/27/16 15:58:48.241 luup_log:27: user= <0x76be5520> 50 12/27/16 15:58:48.242 luup_log:27: id= <0x76be5520> 50 12/27/16 15:58:48.242 luup_log:27: pass= <0x76be5520> 50 12/27/16 15:58:48.242 luup_log:27: ip= <0x76be5520> 50 12/27/16 15:58:48.242 luup_log:27: room_num=0 <0x76be5520> 50 12/27/16 15:58:48.242 luup_log:27: udn=uuid:4d494342-5342-5645-0001-000002fb1750 <0x76be5520> 50 12/27/16 15:58:48.243 luup_log:27: subcategory_num=0 <0x76be5520> 50 12/27/16 15:58:48.243 luup_log:27: invisible=true <0x76be5520> 50 12/27/16 15:58:48.243 luup_log:27: hidden=false <0x76be5520> 50 12/27/16 15:58:48.243 luup_log:27: embedded=false <0x76be5520> 50 12/27/16 15:58:48.243 luup_log:27: device_num_parent=0 <0x76be5520> 50 12/27/16 15:58:48.243 luup_log:27: device_type=urn:schemas-micasaverde-com:device:ZWaveNetwork:1 <0x76be5520> 50 12/27/16 15:58:48.244 luup_log:27: Device #2:mac=000D6F000C5BC6E6 <0x76be5520> 50 12/27/16 15:58:48.244 luup_log:27: category_num=0 <0x76be5520> 50 12/27/16 15:58:48.244 luup_log:27: description=Zigbee Network <0x76be5520> 50 12/27/16 15:58:48.244 luup_log:27: user= <0x76be5520> 50 12/27/16 15:58:48.245 luup_log:27: id= <0x76be5520> 50 12/27/16 15:58:48.245 luup_log:27: pass= <0x76be5520> 50 12/27/16 15:58:48.245 luup_log:27: ip= <0x76be5520> 50 12/27/16 15:58:48.245 luup_log:27: room_num=0 <0x76be5520> 50 12/27/16 15:58:48.245 luup_log:27: udn=uuid:4d494342-5342-5645-0002-000002fb1750 <0x76be5520> 50 12/27/16 15:58:48.246 luup_log:27: subcategory_num=-1 <0x76be5520> 50 12/27/16 15:58:48.246 luup_log:27: invisible=true <0x76be5520> 50 12/27/16 15:58:48.246 luup_log:27: hidden=false <0x76be5520> 50 12/27/16 15:58:48.246 luup_log:27: embedded=false <0x76be5520> 50 12/27/16 15:58:48.246 luup_log:27: device_num_parent=0 <0x76be5520> 50 12/27/16 15:58:48.247 luup_log:27: device_type=urn:schemas-micasaverde-com:device:ZigbeeNetwork:1 <0x76be5520> 50 12/27/16 15:58:48.247 luup_log:27: Device #3:mac=B4:A5:EF:ED:58:1D <0x76be5520> 50 12/27/16 15:58:48.247 luup_log:27: category_num=0 <0x76be5520> 50 12/27/16 15:58:48.247 luup_log:27: description=Bluetooth Network <0x76be5520> 50 12/27/16 15:58:48.247 luup_log:27: user= <0x76be5520> 50 12/27/16 15:58:48.247 luup_log:27: id= <0x76be5520> 50 12/27/16 15:58:48.248 luup_log:27: pass= <0x76be5520> 50 12/27/16 15:58:48.248 luup_log:27: ip= <0x76be5520> 50 12/27/16 15:58:48.248 luup_log:27: room_num=0 <0x76be5520> 50 12/27/16 15:58:48.248 luup_log:27: udn=uuid:4d494342-5342-5645-0003-000002fb1750 <0x76be5520> 50 12/27/16 15:58:48.249 luup_log:27: subcategory_num=-1 <0x76be5520> 50 12/27/16 15:58:48.249 luup_log:27: invisible=true <0x76be5520> 50 12/27/16 15:58:48.249 luup_log:27: hidden=false <0x76be5520> 50 12/27/16 15:58:48.249 luup_log:27: embedded=false <0x76be5520> 50 12/27/16 15:58:48.249 luup_log:27: device_num_parent=0 <0x76be5520> 50 12/27/16 15:58:48.249 luup_log:27: device_type=urn:schemas-micasaverde-com:device:BluetoothNetwork:1 <0x76be5520> 50 12/27/16 15:58:48.250 luup_log:27: Device #20:mac= <0x76be5520> 50 12/27/16 15:58:48.250 luup_log:27: category_num=17 <0x76be5520> 50 12/27/16 15:58:48.250 luup_log:27: description=Bar South Temp <0x76be5520> 50 12/27/16 15:58:48.250 luup_log:27: user= <0x76be5520> 50 12/27/16 15:58:48.250 luup_log:27: id=FE0000047CE7AE28:Temperature <0x76be5520> 50 12/27/16 15:58:48.251 luup_log:27: pass= <0x76be5520> 50 12/27/16 15:58:48.251 luup_log:27: ip=192.168.1.11 <0x76be5520> 50 12/27/16 15:58:48.251 luup_log:27: room_num=10 <0x76be5520> 50 12/27/16 15:58:48.251 luup_log:27: udn=uuid:4d494342-5342-5645-0014-000002fb1750 <0x76be5520> 50 12/27/16 15:58:48.251 luup_log:27: subcategory_num=0 <0x76be5520> 50 12/27/16 15:58:48.252 luup_log:27: invisible=false <0x76be5520> 50 12/27/16 15:58:48.252 luup_log:27: hidden=false <0x76be5520> 50 12/27/16 15:58:48.252 luup_log:27: embedded=false <0x76be5520> 50 12/27/16 15:58:48.252 luup_log:27: device_num_parent=19 <0x76be5520> 50 12/27/16 15:58:48.252 luup_log:27: device_type=urn:schemas-micasaverde-com:device:TemperatureSensor:1 <0x76be5520> 50 12/27/16 15:58:48.253 luup_log:27: Device #21:mac= <0x76be5520> 50 12/27/16 15:58:48.253 luup_log:27: category_num=17 <0x76be5520> 50 12/27/16 15:58:48.253 luup_log:27: description=Guest Bedroom Temp <0x76be5520> 50 12/27/16 15:58:48.253 luup_log:27: user= <0x76be5520> 50 12/27/16 15:58:48.253 luup_log:27: id=9A02146426ECFF28:Temperature <0x76be5520> 50 12/27/16 15:58:48.254 luup_log:27: pass= <0x76be5520> 50 12/27/16 15:58:48.254 luup_log:27: ip=192.168.1.11 <0x76be5520> 50 12/27/16 15:58:48.254 luup_log:27: room_num=9 <0x76be5520> 50 12/27/16 15:58:48.254 luup_log:27: udn=uuid:4d494342-5342-5645-0015-000002fb1750 <0x76be5520> 50 12/27/16 15:58:48.254 luup_log:27: subcategory_num=0 <0x76be5520> 50 12/27/16 15:58:48.255 luup_log:27: invisible=false <0x76be5520> 50 12/27/16 15:58:48.255 luup_log:27: hidden=false <0x76be5520> 50 12/27/16 15:58:48.255 luup_log:27: embedded=false <0x76be5520> 50 12/27/16 15:58:48.255 luup_log:27: device_num_parent=19 <0x76be5520> 50 12/27/16 15:58:48.255 luup_log:27: device_type=urn:schemas-micasaverde-com:device:TemperatureSensor:1 <0x76be5520> 50 12/27/16 15:58:48.256 luup_log:27: Device #22:mac= <0x76be5520> 50 12/27/16 15:58:48.256 luup_log:27: category_num=17 <0x76be5520> 50 12/27/16 15:58:48.256 luup_log:27: description=Office Temp <0x76be5520> 50 12/27/16 15:58:48.256 luup_log:27: user= <0x76be5520> 50 12/27/16 15:58:48.257 luup_log:27: id=C80000047D69C028:Temperature <0x76be5520> 50 12/27/16 15:58:48.257 luup_log:27: pass= <0x76be5520> 50 12/27/16 15:58:48.257 luup_log:27: ip=192.168.1.11 <0x76be5520> 50 12/27/16 15:58:48.257 luup_log:27: room_num=7 <0x76be5520> 50 12/27/16 15:58:48.257 luup_log:27: udn=uuid:4d494342-5342-5645-0016-000002fb1750 <0x76be5520> 50 12/27/16 15:58:48.258 luup_log:27: subcategory_num=0 <0x76be5520> 50 12/27/16 15:58:48.258 luup_log:27: invisible=false <0x76be5520> 50 12/27/16 15:58:48.258 luup_log:27: hidden=false <0x76be5520> 50 12/27/16 15:58:48.258 luup_log:27: embedded=false <0x76be5520> 50 12/27/16 15:58:48.258 luup_log:27: device_num_parent=19 <0x76be5520> 50 12/27/16 15:58:48.258 luup_log:27: device_type=urn:schemas-micasaverde-com:device:TemperatureSensor:1 <0x76be5520> 50 12/27/16 15:58:48.259 luup_log:27: Device #23:mac= <0x76be5520> 50 12/27/16 15:58:48.259 luup_log:27: category_num=17 <0x76be5520> 50 12/27/16 15:58:48.259 luup_log:27: description=Master Bedroom Temp <0x76be5520> 50 12/27/16 15:58:48.259 luup_log:27: user= <0x76be5520> 50 12/27/16 15:58:48.259 luup_log:27: id=5602146472A5FF28:Temperature <0x76be5520> 50 12/27/16 15:58:48.260 luup_log:27: pass= <0x76be5520> 50 12/27/16 15:58:48.260 luup_log:27: ip=192.168.1.11 <0x76be5520> 50 12/27/16 15:58:48.260 luup_log:27: room_num=8 <0x76be5520> 50 12/27/16 15:58:48.260 luup_log:27: udn=uuid:4d494342-5342-5645-0017-000002fb1750 <0x76be5520> 50 12/27/16 15:58:48.260 luup_log:27: subcategory_num=0 <0x76be5520> 50 12/27/16 15:58:48.261 luup_log:27: invisible=false <0x76be5520> 50 12/27/16 15:58:48.261 luup_log:27: hidden=false <0x76be5520> 50 12/27/16 15:58:48.261 luup_log:27: embedded=false <0x76be5520> 50 12/27/16 15:58:48.261 luup_log:27: device_num_parent=19 <0x76be5520> 50 12/27/16 15:58:48.261 luup_log:27: device_type=urn:schemas-micasaverde-com:device:TemperatureSensor:1 <0x76be5520> 50 12/27/16 15:58:48.262 luup_log:27: Device #24:mac= <0x76be5520> 50 12/27/16 15:58:48.262 luup_log:27: category_num=17 <0x76be5520> 50 12/27/16 15:58:48.262 luup_log:27: description=Kitchen Hall Temp <0x76be5520> 50 12/27/16 15:58:48.262 luup_log:27: user= <0x76be5520> 50 12/27/16 15:58:48.262 luup_log:27: id=9E000003A827AF28:Temperature <0x76be5520> 50 12/27/16 15:58:48.263 luup_log:27: pass= <0x76be5520> 50 12/27/16 15:58:48.263 luup_log:27: ip=192.168.1.11 <0x76be5520> 50 12/27/16 15:58:48.263 luup_log:27: room_num=3 <0x76be5520> 50 12/27/16 15:58:48.263 luup_log:27: udn=uuid:4d494342-5342-5645-0018-000002fb1750 <0x76be5520> 50 12/27/16 15:58:48.263 luup_log:27: subcategory_num=0 <0x76be5520> 50 12/27/16 15:58:48.264 luup_log:27: invisible=false <0x76be5520> 50 12/27/16 15:58:48.264 luup_log:27: hidden=false <0x76be5520> 50 12/27/16 15:58:48.264 luup_log:27: embedded=false <0x76be5520> 50 12/27/16 15:58:48.264 luup_log:27: device_num_parent=19 <0x76be5520> 50 12/27/16 15:58:48.264 luup_log:27: device_type=urn:schemas-micasaverde-com:device:TemperatureSensor:1 <0x76be5520> 50 12/27/16 15:58:48.265 luup_log:27: Device #25:mac= <0x76be5520> 50 12/27/16 15:58:48.265 luup_log:27: category_num=17 <0x76be5520> 50 12/27/16 15:58:48.265 luup_log:27: description=Bar North Temp <0x76be5520> 50 12/27/16 15:58:48.265 luup_log:27: user= <0x76be5520> 50 12/27/16 15:58:48.265 luup_log:27: id=7A000003A7472828:Temperature <0x76be5520> 50 12/27/16 15:58:48.266 luup_log:27: pass= <0x76be5520> 50 12/27/16 15:58:48.266 luup_log:27: ip=192.168.1.11 <0x76be5520> 50 12/27/16 15:58:48.266 luup_log:27: room_num=10 <0x76be5520> 50 12/27/16 15:58:48.266 luup_log:27: udn=uuid:4d494342-5342-5645-0019-000002fb1750 <0x76be5520> 50 12/27/16 15:58:48.266 luup_log:27: subcategory_num=0 <0x76be5520> 50 12/27/16 15:58:48.267 luup_log:27: invisible=false <0x76be5520> 50 12/27/16 15:58:48.267 luup_log:27: hidden=false <0x76be5520> 50 12/27/16 15:58:48.267 luup_log:27: embedded=false <0x76be5520> 50 12/27/16 15:58:48.267 luup_log:27: device_num_parent=19 <0x76be5520> 50 12/27/16 15:58:48.267 luup_log:27: device_type=urn:schemas-micasaverde-com:device:TemperatureSensor:1 <0x76be5520> 50 12/27/16 15:58:48.268 luup_log:27: Device #26:mac= <0x76be5520> 50 12/27/16 15:58:48.268 luup_log:27: category_num=17 <0x76be5520> 50 12/27/16 15:58:48.268 luup_log:27: description=Outside Temp <0x76be5520> 50 12/27/16 15:58:48.268 luup_log:27: user= <0x76be5520> 50 12/27/16 15:58:48.268 luup_log:27: id=F60000047DA93228:Temperature <0x76be5520> 50 12/27/16 15:58:48.269 luup_log:27: pass= <0x76be5520> 50 12/27/16 15:58:48.269 luup_log:27: ip=192.168.1.11 <0x76be5520> 50 12/27/16 15:58:48.269 luup_log:27: room_num=13 <0x76be5520> 50 12/27/16 15:58:48.269 luup_log:27: udn=uuid:4d494342-5342-5645-001a-000002fb1750 <0x76be5520> 50 12/27/16 15:58:48.269 luup_log:27: subcategory_num=0 <0x76be5520> 50 12/27/16 15:58:48.269 luup_log:27: invisible=false <0x76be5520> 50 12/27/16 15:58:48.270 luup_log:27: hidden=false <0x76be5520> 50 12/27/16 15:58:48.270 luup_log:27: embedded=false <0x76be5520> 50 12/27/16 15:58:48.270 luup_log:27: device_num_parent=19 <0x76be5520> 50 12/27/16 15:58:48.270 luup_log:27: device_type=urn:schemas-micasaverde-com:device:TemperatureSensor:1 <0x76be5520> 50 12/27/16 15:58:48.270 luup_log:27: Device #27:mac= <0x76be5520> 50 12/27/16 15:58:48.271 luup_log:27: category_num=0 <0x76be5520> 50 12/27/16 15:58:48.271 luup_log:27: description=MySensors Plugin <0x76be5520> 50 12/27/16 15:58:48.271 luup_log:27: user= <0x76be5520> 50 12/27/16 15:58:48.271 luup_log:27: id= <0x76be5520> 50 12/27/16 15:58:48.271 luup_log:27: pass= <0x76be5520> 50 12/27/16 15:58:48.272 luup_log:27: ip= <0x76be5520> 50 12/27/16 15:58:48.272 luup_log:27: room_num=0 <0x76be5520> 50 12/27/16 15:58:48.272 luup_log:27: udn=uuid:4d494342-5342-5645-001b-000002fb1750 <0x76be5520> 50 12/27/16 15:58:48.272 luup_log:27: subcategory_num=-1 <0x76be5520> 50 12/27/16 15:58:48.272 luup_log:27: invisible=false <0x76be5520> 50 12/27/16 15:58:48.273 luup_log:27: hidden=false <0x76be5520> 50 12/27/16 15:58:48.273 luup_log:27: embedded=false <0x76be5520> 50 12/27/16 15:58:48.273 luup_log:27: device_num_parent=0 <0x76be5520> 50 12/27/16 15:58:48.273 luup_log:27: device_type=urn:schemas-arduino-cc:device:arduino:1 <0x76be5520> 50 12/27/16 15:58:48.273 luup_log:27: Device #5:mac= <0x76be5520> 50 12/27/16 15:58:48.274 luup_log:27: category_num=0 <0x76be5520> 50 12/27/16 15:58:48.274 luup_log:27: description=Serial_Portlist_2144272085 <0x76be5520> 50 12/27/16 15:58:48.274 luup_log:27: user= <0x76be5520> 50 12/27/16 15:58:48.274 luup_log:27: id=50009936 <0x76be5520> 50 12/27/16 15:58:48.274 luup_log:27: pass= <0x76be5520> 50 12/27/16 15:58:48.275 luup_log:27: ip=127.0.0.1 <0x76be5520> 50 12/27/16 15:58:48.275 luup_log:27: room_num=0 <0x76be5520> 50 12/27/16 15:58:48.275 luup_log:27: udn=uuid:4d494342-5342-5645-0005-000002fb1750 <0x76be5520> 50 12/27/16 15:58:48.275 luup_log:27: subcategory_num=-1 <0x76be5520> 50 12/27/16 15:58:48.275 luup_log:27: invisible=true <0x76be5520> 50 12/27/16 15:58:48.276 luup_log:27: hidden=false <0x76be5520> 50 12/27/16 15:58:48.276 luup_log:27: embedded=false <0x76be5520> 50 12/27/16 15:58:48.276 luup_log:27: device_num_parent=0 <0x76be5520> 50 12/27/16 15:58:48.276 luup_log:27: device_type=urn:micasaverde-org:device:SerialPortRoot:1 <0x76be5520> 50 12/27/16 15:58:48.276 luup_log:27: Device #4:mac= <0x76be5520> 50 12/27/16 15:58:48.277 luup_log:27: category_num=14 <0x76be5520> 50 12/27/16 15:58:48.277 luup_log:27: description=_Scene Controller <0x76be5520> 50 12/27/16 15:58:48.277 luup_log:27: user= <0x76be5520> 50 12/27/16 15:58:48.277 luup_log:27: id=1 <0x76be5520> 50 12/27/16 15:58:48.277 luup_log:27: pass= <0x76be5520> 50 12/27/16 15:58:48.278 luup_log:27: ip= <0x76be5520> 50 12/27/16 15:58:48.278 luup_log:27: room_num=0 <0x76be5520> 50 12/27/16 15:58:48.278 luup_log:27: udn=uuid:4d494342-5342-5645-0004-000002fb1750 <0x76be5520> 50 12/27/16 15:58:48.278 luup_log:27: subcategory_num=0 <0x76be5520> 50 12/27/16 15:58:48.278 luup_log:27: invisible=true <0x76be5520> 50 12/27/16 15:58:48.278 luup_log:27: hidden=false <0x76be5520> 50 12/27/16 15:58:48.279 luup_log:27: embedded=false <0x76be5520> 50 12/27/16 15:58:48.279 luup_log:27: device_num_parent=1 <0x76be5520> 50 12/27/16 15:58:48.279 luup_log:27: device_type=urn:schemas-micasaverde-com:device:SceneController:1 <0x76be5520> 50 12/27/16 15:58:48.279 luup_log:27: Device #6:mac= <0x76be5520> 50 12/27/16 15:58:48.279 luup_log:27: category_num=13 <0x76be5520> 50 12/27/16 15:58:48.280 luup_log:27: description=pl2303 <0x76be5520> 50 12/27/16 15:58:48.280 luup_log:27: user= <0x76be5520> 50 12/27/16 15:58:48.280 luup_log:27: id=usb-xhci-hcd-1.1 <0x76be5520> 50 12/27/16 15:58:48.280 luup_log:27: pass= <0x76be5520> 50 12/27/16 15:58:48.280 luup_log:27: ip=127.0.0.1 <0x76be5520> 50 12/27/16 15:58:48.281 luup_log:27: room_num=0 <0x76be5520> 50 12/27/16 15:58:48.281 luup_log:27: udn=uuid:4d494342-5342-5645-0006-000002fb1750 <0x76be5520> 50 12/27/16 15:58:48.281 luup_log:27: subcategory_num=0 <0x76be5520> 50 12/27/16 15:58:48.281 luup_log:27: invisible=true <0x76be5520> 50 12/27/16 15:58:48.281 luup_log:27: hidden=false <0x76be5520> 50 12/27/16 15:58:48.282 luup_log:27: embedded=true <0x76be5520> 50 12/27/16 15:58:48.282 luup_log:27: device_num_parent=5 <0x76be5520> 50 12/27/16 15:58:48.282 luup_log:27: device_type=urn:micasaverde-org:device:SerialPort:1 <0x76be5520> 50 12/27/16 15:58:48.282 luup_log:27: Device #19:mac= <0x76be5520> 50 12/27/16 15:58:48.282 luup_log:27: category_num=0 <0x76be5520> 50 12/27/16 15:58:48.283 luup_log:27: description=OWServer <0x76be5520> 50 12/27/16 15:58:48.283 luup_log:27: user= <0x76be5520> 50 12/27/16 15:58:48.283 luup_log:27: id= <0x76be5520> 50 12/27/16 15:58:48.283 luup_log:27: pass= <0x76be5520> 50 12/27/16 15:58:48.283 luup_log:27: ip=192.168.1.11 <0x76be5520> 50 12/27/16 15:58:48.284 luup_log:27: room_num=0 <0x76be5520> 50 12/27/16 15:58:48.284 luup_log:27: udn=uuid:4d494342-5342-5645-0013-000002fb1750 <0x76be5520> 50 12/27/16 15:58:48.284 luup_log:27: subcategory_num=-1 <0x76be5520> 50 12/27/16 15:58:48.284 luup_log:27: invisible=false <0x76be5520> 50 12/27/16 15:58:48.284 luup_log:27: hidden=false <0x76be5520> 50 12/27/16 15:58:48.285 luup_log:27: embedded=false <0x76be5520> 50 12/27/16 15:58:48.285 luup_log:27: device_num_parent=0 <0x76be5520> 50 12/27/16 15:58:48.285 luup_log:27: device_type=urn:cd-jackson-com:device:OWServer:1 <0x76be5520> 50 12/27/16 15:58:48.286 luup_log:27: Arduino: Sending: 0;0;3;0;2;Get Version <0x76be5520> 50 12/27/16 15:58:49.066 luup_log:27: Arduino: Log: TSP:MSG:READ 255-255-0 s=255,c=3,t=3,pt=0,l=0,sg=0: <0x739e5520> 50 12/27/16 15:58:49.067 luup_log:27: Arduino: Sending: 255;255;3;0;4;1 <0x739e5520> 50 12/27/16 15:58:50.547 luup_log:27: Arduino: Log: TSP:SANCHK:OK <0x739e5520> 50 12/27/16 15:58:51.085 luup_log:27: Arduino: Log: TSP:MSG:READ 255-255-0 s=255,c=3,t=3,pt=0,l=0,sg=0: <0x739e5520> 50 12/27/16 15:58:51.086 luup_log:27: Arduino: Sending: 255;255;3;0;4;2 <0x739e5520>The highest device # it shows is 27 which doesn't even come close to hitting the 254 mark. I am baffled.
