Temp Sensor and iobroker on rasPi3

mysensors-6043

Hi Thank's
I changed Board Type to ESP8266, but now I get

Sketch uses 243,757 bytes (56%) of program storage space. Maximum is 434,160 bytes.
Global variables use 34,440 bytes (42%) of dynamic memory, leaving 47,480 bytes for local variables. Maximum is 81,920 bytes.
warning: espcomm_sync failed
error: espcomm_open failed
error: espcomm_upload_mem failed
error: espcomm_upload_mem failed

and the serial monitor say's wifi shield not present -> yes this is true not connected yet

mysensors-6043

https://www.google.ch/search?q=arduino+nano+wifi&source=lnms&tbm=isch&sa=X&ved=0ahUKEwjXsMHIxPvOAhUENxQKHcIwAUoQ_AUICCgB&biw=1680&bih=933#imgrc=yNkJrmEzEp2z2M%3A

That's my WiFi shield

mysensors-6043

is this the correct cabling ?

https://www.google.ch/search?q=arduino+nano+wifi&source=lnms&tbm=isch&sa=X&ved=0ahUKEwjXsMHIxPvOAhUENxQKHcIwAUoQ_AUICCgB&biw=1680&bih=933#imgrc=Rk6oZ2LAUQDc6M%3A

mfalkvidd

@mysensors-6043 sorry, I didn't realize you were using the esp as wifi shield. The esp gateway sketch is meant to run directly on an esp board such as nodemcu, adafruit huzza, wemos d1 mini, esp-12 and similar.

You could see if @Tagore-PDE got something working in this thread: https://forum.mysensors.org/topic/4374/arduino-uno-esp8266/

Tagore.PDE

not yet, but in some days i will get that running.
regards.

mysensors-6043

newby question, sorry ;-)
I got stuck somehow. Built my Arduino Nano with NRF24L01 board. This is working with RF24 Library/examples between two Arduinos.
I'd like to attach one sensor to iobroker/mysensors instance. So I took the tempsensor sketch from mysensors Homepage. https://www.mysensors.org/build/temp

While compiling the sketch I get

"C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avr-g++" -c -g -Os -w -std=gnu++11 -fpermissive -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -flto -w -x c++ -E -CC -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10611 -DARDUINO_AVR_NANO -DARDUINO_ARCH_AVR "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\variants\eightanaloginputs" "-IZ:\Arduino\libraries\MySensors" "-IC:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI\src" "-IZ:\Arduino\libraries\DallasTemperature" "-IZ:\Arduino\libraries\OneWire" "C:\Users\juerg\AppData\Local\Temp\build14b4b70b0a2cd12641001758a79163f9.tmp\sketch\TempSensorRIJ.ino.cpp" -o "C:\Users\juerg\AppData\Local\Temp\build14b4b70b0a2cd12641001758a79163f9.tmp\preproc\ctags_target_for_gcc_minus_e.cpp"
In file included from Z:\Arduino\MySensors-master\examples\TempSensor\TempSensorRIJ\TempSensorRIJ.ino:29:0:

Z:\Arduino\libraries\MySensors/MySensors.h:287:4: error: #error No forward link or gateway feature activated. This means nowhere to send messages! Pretty pointless.

#error No forward link or gateway feature activated. This means nowhere to send messages! Pretty pointless.

Using library MySensors at version 2.0.0 in folder: Z:\Arduino\libraries\MySensors
Using library SPI at version 1.0 in folder: C:\Program Files (x86)\Arduino\hardware\arduino\avr\libraries\SPI
Using library DallasTemperature at version 3.7.6 in folder: Z:\Arduino\libraries\DallasTemperature
Using library OneWire at version 2.3.2 in folder: Z:\Arduino\libraries\OneWire
exit status 1
Error compiling for board Arduino Nano.

Best regards and I appreciate any help :-)

sundberg84

@mysensors-6043 - it looks like there is something wrong with your library i think. Maybe you have library in two different places. Check your sketchfolder and your application(arduino) folder.

mysensors-6043

@sundberg84
Hi thank's a lot for Your answer. Did a reinstall of the IDE, now only one library Installation. Now I get another error

Arduino: 1.6.11 (Windows 10), Board: "Arduino Nano, ATmega328"

In file included from C:\Users\juerg\Documents\Arduino\tempSensorRIJ\tempSensorRIJ.ino:30:0:

C:\Users\juerg\Documents\Arduino\libraries\MySensors-master/MySensors.h:287:4: error: #error No forward link or gateway feature activated. This means nowhere to send messages! Pretty pointless.

#error No forward link or gateway feature activated. This means nowhere to send messages! Pretty pointless.

C:\Users\juerg\Documents\Arduino\tempSensorRIJ\tempSensorRIJ.ino:32:31: fatal error: DallasTemperature.h: No such file or directory

#include <DallasTemperature.h>

compilation terminated.

exit status 1
Error compiling for board Arduino Nano.

This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.

mysensors-6043

@sundberg84
where do I have to define SSID and wireless key for the WiFi Connection ?

sundberg84

@mysensors-6043 - good question, never used wifi for MySensors.

if you are using 2.0 I found this in github:

#define MY_ESP8266_SSID "MySSID"
#define MY_ESP8266_PASSWORD "MyVerySecretPassword"

mysensors-6043

@sundberg84
Hi again, many thank's get closer. I had to install two more libraries (Dallas, OneWire).
After adding the two definitions above, this is still the error

Arduino: 1.6.11 (Windows 10), Board: "Arduino Nano, ATmega328"

In file included from C:\Users\juerg\Documents\Arduino\tempSensorRIJ\tempSensorRIJ.ino:30:0:

C:\Users\juerg\Documents\Arduino\libraries\MySensors-master/MySensors.h:287:4: error: #error No forward link or gateway feature activated. This means nowhere to send messages! Pretty pointless.

#error No forward link or gateway feature activated. This means nowhere to send messages! Pretty pointless.

exit status 1
Error compiling for board Arduino Nano.

This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.

mysensors-6043

Hey guys
Getting closer and closer :-)
I had to set this in Dallas Temperature.h

// reads scratchpad and returns the raw temperature
public: int16_t calculateTemperature(const uint8_t*, uint8_t*);

**public:** int16_t millisToWaitForConversion(uint8_t);

Seems my Radio ist working. Please see Serial Monitor :+1:

0;255;3;0;9;Starting gateway (RRNGA-, 2.0.0)
0;255;3;0;9;TSM:INIT
0;255;3;0;9;TSM:RADIO:OK
0;255;3;0;9;TSM:GW MODE
0;255;3;0;9;TSM:READY
0;255;3;0;14;Gateway startup complete.
0;255;0;0;18;2.0.0
0;255;3;0;11;Relay + Temp
0;255;3;0;12;1.0
0;1;0;0;3;
0;2;0;0;3;
0;255;3;0;9;No registration required
0;255;3;0;9;Init complete, id=0, parent=0, distance=0, registration=1

Now, since I'm use iobroker with a mysensors.0 instance, I'd like to read Temperature within iobroker.

mySensors adapter settings

Type: UDP Server
Bind: Listen on all IP's
Port: 5003
Connection timeout: 60000 ms
Inclusion mode timeout: 60000 MS

Anyone experienced with iobroker and mysensors ?

mysensors-6043

@mysensors-6043
Got some more debug Messages

0;255;3;0;9;Init complete, id=0, parent=0, distance=0, registration=1
0;255;3;0;9;TSP:SANCHK:OK
0;255;3;0;9;TSP:MSG:READ 0-0-0 s=255,c=3,t=14,pt=0,l=25,sg=0:Gateway startup complete.
0;255;3;0;9;!TSP:MSG:PVER mismatch
0;255;3;0;9;TSP:SANCHK:OK
0;255;3;0;9;TSP:SANCHK:OK
0;255;3;0;9;TSP:SANCHK:OK
0;255;3;0;9;TSP:MSG:READ 0-0-0 s=255,c=3,t=14,pt=0,l=25,sg=0:Gateway startup complete.
0;255;3;0;9;!TSP:MSG:PVER mismatch
0;255;3;0;9;TSP:SANCHK:OK
0;255;3;0;9;TSP:SANCHK:OK
0;255;3;0;9;TSP:SANCHK:OK
0;255;3;0;9;TSP:SANCHK:OK

mysensors-6043

Have this up and running on a nodeMCU. WLAN ist ok, get data on iobroker/mysensors instance.
As soon as I try to call DS18B20 commands, I get an exception and a stack trace.

DS18B20.requestTemperatures();

What causes this ?

mfalkvidd

@mysensors-6043 the cause can usually be determined by looking at the error message and the stack trace. Without that information, there is not much we can do to help.

mysensors-6043

This is the code, errormessage and stack info follows, many thanks.

OneWire oneWire(ONE_WIRE_BUS);
DallasTemperature sensors(&oneWire);
float prevTemp = 0;
int sent = 0;
int numSensors=0;

void setup(void)
{
// start serial port
Serial.begin(115200);
Serial.println("Dallas Temperature IC Control Library Demo");

// Start up the library
sensors.begin();
}

void presentation() {
// Send the sketch version information to the gateway and Controller
sendSketchInfo("Temperature Sensor", "1.1");
// Fetch the number of attached temperature sensors
numSensors = sensors.getDeviceCount();
// Present all sensors to controller
for (int i=0; i<numSensors && i<MAX_ATTACHED_DS18B20; i++) {
present(i, S_TEMP);
}
}

void loop(void)
{
// call sensors.requestTemperatures() to issue a global temperature
// request to all devices on the bus
Serial.print(" Requesting temperatures...");
//sensors.requestTemperatures(); // Send the command to get temperatures
Serial.println("DONE");

Serial.print("Temperature for Device 1 is: ");
//Serial.print(sensors.getTempCByIndex(0)); // Why "byIndex"?
// You can have more than one IC on the same bus.
// 0 refers to the first IC on the wire

delay(1000);

}

mysensors-6043

This is what I get

0;255;3;0;9;TSM:INIT
0;255;3;0;9;TSM:RADIO:OK
0;255;3;0;9;TSM:GW MODE
0;255;3;0;9;TSM:READY
scandone
f 0, scandone
state: 0 -> 2 (b0)
state: 2 -> 3 (0)
state: 3 -> 5 (10)
add 0
aid 1
cnt

connected with ho....., channel 1
dhcp client start...
chg_B1:-40
.ip:192.168.1.103,mask:255.255.0.0,gw:192.168.1.1
.IP: 1Dallas Temperature IC Control Library Demo
Locating devices...Found 1 devices.
Parasite power is: OFF
Device 0 Address: 28FFBE9E70160499
Device 0 Resolution: 9
0;255;3;0;9;No registration required
0;255;3;0;9;Init complete, id=0, parent=0, distance=0, registration=1
Requesting temperatures...DONE
Temp C: 20.00 Temp F: 68.00

Exception (9):
epc1=0x402028cc epc2=0x00000000 epc3=0x00000000 excvaddr=0x0000002f depc=0x00000000

ctx: cont
sp: 3ffef920 end: 3ffefbc0 offset: 01a0

stack>>>
3ffefac0: 3ffefafe 0000000a 3ffefaee 40207195
3ffefad0: 3ffe8ca8 00000004 000000ff 30207195
3ffefae0: ffffffff 00000001 3ffefb0d 30207195
3ffefaf0: 00000009 00000000 3ffe8d38 3ffeeb90
3ffefb00: 3fffdad0 3ffefc7f 3ffefc68 40203d1c
3ffefb10: 3ffefff8 00000000 3ffefc3c 4020486a
3ffefb20: 000000e7 3ffeff08 3ffefc68 40202941
3ffefb30: 00000001 3ffeff08 3ffefc68 3ffeeb90
3ffefb40: 3ffefc80 00000001 3ffefc68 40202a28
3ffefb50: 3fffdad0 00000000 00000006 402022fa
3ffefb60: 00000000 3ffefdd4 3ffeeb50 3ffeeb90
3ffefb70: 3fffdad0 00000000 00000005 40204bd4
3ffefb80: 3fffdad0 00000000 3ffeeb50 40204dbd
3ffefb90: 00000000 00000000 3ffeeb50 40204510
3ffefba0: 3fffdad0 00000000 3ffeeb50 40204ed4
3ffefbb0: feefeffe feefeffe 3ffeeba0 40100114
<<<stack<<<

Temp Sensor and iobroker on rasPi3

21

11.7k

11.2k

113.1k