Driving electrical heater
-
Hello,
Would it be possible to drive electrical heater with "mysensors" and Domoticz ?
I'd need to have two outputs to use something like : This
( sorry it's in french)
Thank you@phil77560 It's hard for me to read, because google didn't do a great job on the translation. But I guess it would be possible. It might help if you post the schematics off that schematics on this forum.
-
Hello,
Would it be possible to drive electrical heater with "mysensors" and Domoticz ?
I'd need to have two outputs to use something like : This
( sorry it's in french)
Thank you@phil77560 That would be very well possible. You can drive the led's in the optocouplers from the arduino digital outputs and use a remote "switch" to drive the outputs.
-
Maybe this sketch can be used, since this will read incoming commands, and activate a relay, but for your need as AWI writes, you use the Arduino output direct to your above circuit (Then you don't have to listen to relay click)
https://github.com/mysensors/MySensors/blob/master/examples/RelayActuator/RelayActuator.ino
-
Hello,
Would it be possible to drive electrical heater with "mysensors" and Domoticz ?
I'd need to have two outputs to use something like : This
( sorry it's in french)
Thank you@phil77560 yes, it is possible - I have a SSR switching on a 3kWatt tent with a help of a simple 433Mhz switch controlled by Domoticz. No MySensors in this setup.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login