WDT doesn't work well



  • Hello,

    I'm testing the library 2.0 with WDT enabled.

    In before() I add "wdt_enable(wdto_8seg)" and I comment from the _proces() the line "hwWatchdogReset();" to force the wdt reset after 8seg

    After wdt reset, the system crash and it is not restore. If I do a manual reset, neither it is restore. I need to remove the power supply to restore the system.

    Need I use a especial bootloader to use wdt with mysensor? I'm using the default bootloader flashed in the arduino pro mini v3



  • I'm going to answer me.

    The problem was the bootloader, I have flashed the MYSbootloader and the WDT is working well.

    Anybody know a bootloader compatible with MYS but it run quickly? because MYSbootloader spends 10seconds to start



  • I answer me again, I try the optiboot bootloader and it work well with mysensor library and WDT enable.

    I hope that the solution is useful for more people

    PD: The optiboot bootloader can be downloaded from here: https://github.com/Optiboot/optiboot/tree/master/optiboot


  • Admin

    @logger02 Indeed, this is a known issue with the stock AVR bootloader - Optiboot or MYSBootlader (depending on the use case) is suggested.



  • Thank you to confirm it


Log in to reply
 

Suggested Topics

  • 1
  • 6
  • 1
  • 2
  • 5
  • 1

68
Online

11.4k
Users

11.1k
Topics

112.6k
Posts