Loosing my mind sensor not talking to esp gw latest 2.2.0 beta



  • Hey Guys

    Best wishes for 2017

    I think I am loosing my mind or I am overlooking something

    I have saveral esp12 devices one is a nodemcu 1.0
    wired everthing according to the sp8266 gateway page

    its sees the radio but i will not comunicate to the sensor node

    the sensor node is a arduino nano running the dallas temp sensor sketch

    both the esp side as the nano side have a cap directtly solder to the nrf
    but the sensor side will never see the gw

    Gw debug info

    ‚n?†$“¦£ÿ_CAJþû0;255;3;0;9;MCO:BGN:INIT GW,CP=RNNGE--,VER=2.2.0-beta
    0;255;3;0;9;TSF:LRT:OK
    0;255;3;0;9;TSM:INIT
    0;255;3;0;9;TSF:WUR:MS=0
    scandone
    state: 0 -> 2 (b0)
    state: 2 -> 3 (0)
    state: 3 -> 5 (10)
    add 0
    aid 9
    cnt

    connected with Martijn, channel 13
    dhcp client start...
    0;255;3;0;9;TSM:INIT:TSP OK
    0;255;3;0;9;TSM:INIT:GW MODE
    0;255;3;0;9;TSM:READY:ID=0,PAR=0,DIS=0
    0;255;3;0;9;MCO:REG:NOT NEEDED
    f r0, scandone
    ....ip:192.168.1.85,mask:255.255.255.0,gw:192.168.1.1
    .IP: 192.168.1.85
    0;255;3;0;9;MCO:BGN:STP
    0;255;3;0;9;MCO:BGN:INIT OK,TSP=1
    pm open,type:2 0

    Sensor side

    0 MCO:BGN:INIT NODE,CP=RNNNA--,VER=2.2.0-beta
    4 TSM:INIT
    4 TSF:WUR:MS=0
    11 TSM:INIT:TSP OK
    13 TSM:FPAR
    1612 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
    3620 !TSM:FPAR:NO REPLY
    3622 TSM:FPAR
    5222 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
    7230 !TSM:FPAR:NO REPLY
    7232 TSM:FPAR
    8832 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
    10840 !TSM:FPAR:NO REPLY
    10842 TSM:FPAR
    12441 TSF:MSG:SEND,255-255-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
    14449 !TSM:FPAR:FAIL
    14450 TSM:FAIL:CNT=1
    14452 TSM:FAIL:PDT

    the only other problem i can think of is that these are the problem

    http://www.banggood.com/3Pcs-NRF24L01-SI24R1-2_4G-Wireless-Power-Enhanced-Communication-Receiver-Module-p-1057155.html?rmmds=myorder

    have some other ones on the way for testing


  • Mod

    @ledfreak3d said:

    the only other problem i can think of is that these are the problem

    Quite likely. You bought some modules with a blob instead of an IC, and these are notorious for connection issues.
    I wouldn't waste any more time on these modules.



  • yea I thought so to pretty sure that's the issue
    already got some new ones on the way



  • @Yveaux what is a blob?


  • Mod

    @mpp a drop of black resin, deposited on the semiconductor. It has no sharp edges, nor text on it.



  • @Yveaux thanks for you response. I don't this this is the cause though, I have tested these transceivers and they're running perfectly with the Moteino code.
    @ledfreak3d, did you manage to get it fixed?


Log in to reply
 

Looks like your connection to MySensors Forum was lost, please wait while we try to reconnect.