Nano gateway error (solved)



  • hi i have a problem..

    i run an rpi3 with domoticz i have a powerd usbhub connected to it.
    i have an nano with nrf+ with antenna (solderd an 4,7 cap to it)

    when i connect it all with dupond cables the gateway works. but now i solderit all to an prototyping board and now i get the error...

    i tried connecting the nrf to an external power suply but still get this error..

    what can i do?

    0;255;3;0;9;MCO:BGN:INIT GW,CP=RNNGA--,VER=2.1.1
    0;255;3;0;9;TSM:INIT
    0;255;3;0;9;TSF:WUR:MS=0
    0;255;3;0;9;!TSM:INIT:TSP FAIL
    0;255;3;0;9;TSM:FAIL:CNT=1
    0;255;3;0;9;TSM:FAIL:PDT
    0;255;3;0;9;TSM:FAIL:RE-INIT
    0;255;3;0;9;TSM:INIT
    0;255;3;0;9;!TSM:INIT:TSP FAIL```


  • Admin

    double check all your wires, it seems that the firmware can't get a response from the radio module?



  • @tbowmo

    Thanks! It indeed was a wire problem..


Log in to reply
 

Looks like your connection to MySensors Forum was lost, please wait while we try to reconnect.