What did you build today (Pictures) ?

[sundberg84]

Today I made a pogo pin programming board for my Logger. (The logger works except one last thing... Rev 5 here we come!)

[nagelc]

I've been playing with an Adafruit AudioFX board and cobbled together this annunciator. Eventually it will be a MySensors node to play alarms or other sounds. It is using a cheap portable speaker to play the sounds. I got it to work with my doorbell button node today.

[sundberg84]

Last fix done on my Logger... I will send it to pcb house today and probably publish a beta on openhardware. Probably nothing special but for me as hobby pcb maker this has been a challenge and great knowledge increase in using oscilloscope and new components.

Tomorrow Black Friday!! (I work in retail so that's a high focus now...)

[NeverDie]

Yesterday received the PCB. Today assembled for testing this battery-powered nRF52-based passive infrared motion detector:

[Yveaux]

Battery powered MySensors Washing machine & dryer monitor, using LDR's to monitor LEDs on front of the appliances.
Each time a LED toggles, the node wakes from interrupt and sends a message. Easy peasy!
When a device is ready, I'll get a message on my mobile phone :smile:

Still need to stuff it in an enclosure...

[gohan]

@Yveaux said in What did you build today (Pictures) ?:

Still need to stuff it in an enclosure...

Yes, definitely very low WAF 😁

[sundberg84]

@gohan - you mean HIGH waf? :) I really like the design... (if the first picture is only what you see)

[Yveaux]

@sundberg84 said in What did you build today (Pictures) ?:

@gohan - you mean HIGH waf? :) I really like the design... (if the first picture is only what you see)

Ofcourse! WAF is overrated anyhow...

[sundberg84]

@Yveaux - Yes, as long as you don't tell her ;)

[bjacobse]

@Yveaux
I think I have similar washing machine, doesn't the LED blink if leave the laundry inside the machine after it had ended washing?
Just curious, if you anyway have had the lid/cover removed from washing machine, why not solder wires parallel to LED and connect to an optocoupler that feeds signal direct to Arduino, and also take 5V supply from the washing machine, and then you can avoid using batteries

[Nca78]

@bjacobse it's pretty different to remove the top that's usually easily removable to put inside furniture, and to unmount front panel and then solder stuff on the PCB. High WAF probably includes ensuring the warranty is not void :D

[Yveaux]

@bjacobse said in What did you build today (Pictures) ?:

@Yveaux
I think I have similar washing machine, doesn't the LED blink if leave the laundry inside the machine after it had ended washing?

The sensor is placed on a led that lights when the machine is finished. I would prefer a led that is lit when it is washing and goes out when finished, but my machine hasn't any.

Just curious, if you anyway have had the lid/cover removed from washing machine, why not solder wires parallel to LED and connect to an optocoupler that feeds signal direct to Arduino, and also take 5V supply from the washing machine, and then you can avoid using batteries

Now I simply removed the cover to hide the wire. The electronics and led are hidden behind a lot of metal aan plastic. I didn't want to take the washer apart and the dryer too.

Just a simple solution working for multiple devices.

[bjacobse]

@Yveaux said in What did you build today (Pictures) ?:

@bjacobse said in What did you build today (Pictures) ?:

@Yveaux
I think I have similar washing machine, doesn't the LED blink if leave the laundry inside the machine after it had ended washing?

The sensor is placed on a led that lights when the machine is finished. I would prefer a led that is lit when it is washing and goes out when finished, but my machine hasn't any.

Just curious, if you anyway have had the lid/cover removed from washing machine, why not solder wires parallel to LED and connect to an optocoupler that feeds signal direct to Arduino, and also take 5V supply from the washing machine, and then you can avoid using batteries

Now I simply removed the cover to hide the wire. The electronics and led are hidden behind a lot of metal aan plastic. I didn't want to take the washer apart and the dryer too.

Just a simple solution working for multiple devices.

Ah this make good sense, I didn't think the electronics was hidden and difficult to get to

[Yveaux]

@bjacobse said in What did you build today (Pictures) ?:

Ah this make good sense, I didn't think the electronics was hidden and difficult to get to

It's German quality :smirk:

[bjacobse]

Finally got my LoRaWAN RAk831 with RPI gateway online

[dbemowsk]

@Yveaux So I never fully understood the reasoning behind putting sensors on a washer or dryer. So you start your clothes washing or drying before you leave for somewhere. Is there a reason to know that it's finished when you are away? There is nothing you can do about it until you get home, at which time you could reasonably assume that it is finished. If you are home, can't you just go and check it after some time? Why would you need a message on your phone?

Just curious.

[Yveaux]

@dbemowsk just to keep the machines running continuously ;-)
And I need to go up 3 stairs to just check on them :hankey:

[dbemowsk]

@Yveaux Makes some sense. Another reason would probably be....."Because you can"... LOL

[Nca78]

@dbemowsk said in What did you build today (Pictures) ?:

@Yveaux So I never fully understood the reasoning behind putting sensors on a washer or dryer. So you start your clothes washing or drying before you leave for somewhere. Is there a reason to know that it's finished when you are away? There is nothing you can do about it until you get home, at which time you could reasonably assume that it is finished. If you are home, can't you just go and check it after some time? Why would you need a message on your phone?

Just curious.

Or if someone else than you starts the machine before leaving for the full day, and you come back much earlier and if you don't have a warning you don't necessarily think about checking the washing machine when you arrive home. Here with the warm temperature if I leave the laundry in the washing machine for 4-5 hours without opening, I'm good for a new wash because it will smell pretty bad :(

[bjacobse]

@dbemowsk
My wife actually fairly often forget to check when the washingmachine is finished, and notice it a few hours later, when kids are a sleep and there is quiet in the house, I will imagine receiving an SMS when washing machine is ready to be emptied will help her, as she is checking her phone often,, even when kids are using all her time