pimatic-mysensors controller plugin

[Sebastien Vayrette-Gavard]

I didn't search enough, http://forum.mysensors.org/topic/753/static-node-id-and-other-unanswered-questions

[Dheeraj]

@Sebastien-Vayrette-Gavard said:

I didn't find the doc that explain it. Can you point me in the right di
follow the below instruction

for pimatic installation:
http://www.pimatic.org/guide/getting-started/installation/

plugin instruction:
https://github.com/DheerajKhajuria/pimatic-mysensors

[jurasek]

Hello, I am new with controler. I already have some temperature sensors and other controls, but until now I did not use any controller,
I am not familiar with linux, and I need help with instalation of controler on raspbery 2.
I am done with OS instalation, I am using image NOOBS.
I try to install Pimatic acording this procedure, http://pimatic.org/guide/getting-started/installation/
And now I am not sure what next.
Please can anybody help me?
Thanks

[funky81]

@jurasek I found out that pimatic installation in the website quite general.
for more details, you can use following link for the forum.
it gives me clear idea and more details step by step

[jurasek]

Thanks, I have a pimatic runing now. I would like connect NRF24 directly to the RPI is this possible? How can I setup mysensors plugin for this?

Thanks

[Dheeraj]

@jurasek connecting NRF24L01 to RPi directly is possible you will find good amount of references if you search this form.

[Fredrik Carlsson]

Hello @Dheeraj
Any info about how to setup a pulsecount sensor?

[Sebastien Vayrette-Gavard]

@Dheeraj is the light sensor supported? I am getting

20:32:05.069 [pimatic] warn: no plugin found for device "Light1" of class "MySensorLight"!

when starting pimatic with

{
      "id": "Light1",
      "name": "Lighti1",
      "class": "MySensorLight",
      "nodeid": 11,
      "sensorid": 0
    }

yet I am able to see the sensor in pimatic's logs

<- I_LOG_MESSAGE 0;0;3;0;9;read: 11-11-0 s=0,c=1,t=23,pt=2,l=2:39

[Dheeraj]

@Sebastien-Vayrette-Gavard said:

yet I am able

kindly change the "class" name as "MySensorsLight" . please note it has a 's' in between.

[Dheeraj]

@Fredrik-Carlsson

frankly, i couldn't check pulsecount using actual power meter. although i can simulate it :) . It's custom made according to my need. I can modify it as per http://www.mysensors.org/build/pulse_power build easily.

currently it only supports "V_WATT" message.

[Fredrik Carlsson]

Good morning @Dheeraj
Do you have any example for how you are configuring it? I have made a node with the "original" sketch and configured it with sensor array [0,1,2] in pimatic. I see the device, with parameters w/kw/kWh but no info comes in. Are you using a custom sketch then or how is your setup working?
I think one of the nicest things about pimatic is the graphing functionality. I want to log and and check how the heating is distributed throughout my house and at which consumption depending on heatpump / woodstove settings

[Sebastien Vayrette-Gavard]

@Dheeraj maybe you can fix the example here for lazy eyes/asses like me. I just copied and paste and didn't notice the missing "s" Thank you so much for the quick support and the great plugin.

[Dheeraj]

@Fredrik-Carlsson said:

think one of the nicest things about pimatic is the graphing functionality. I want to log and and check how the heating is distributed throughout my house and at which consumption depending on heatpump / woodstove set

since i don't have home laptop with me. otherwise , i could have shared the custom sketch with you. but what i remember is that it sends V_WATT message with wattage usage and calculate KW and KWh ( still broken ) at controller end ( pimatic ).

meanwhile, i'm fixing the pulsemeter code which will be compatible with actual sketch, wait for 1 or 2 days. Also, we will be able to see battery status (optional) with sensor devices.

one thing you missed here is that pimatic is browser based also have the "automation by rules" functionality which is awesome. also you can try various plugins available with pimatic. http://www.pimatic.org/pages/plugins/

[Fredrik Carlsson]

@Dheeraj I wait patiently then :)
Yes the more im digging in to pimatic the more i like it and feel that it fits my needs perfectly

[Mad Moo]

Yesterday was great update (0.8.14). Now battery level is connected with device as regular attribute. Great job, @Dheeraj! Thanks a lot!

[Dheeraj]

newer version (0.8.15 ) of plugin release . support Acronym for devices . improves user experience.

[funky81]

@Fredrik-Carlsson info you havent got one, please check my development git

• Pulse sensor ( Watt, KWh and Ampere )
  {
  "id": "EnergySensor,
  "name": "Energy Sensor",
  "class": "MySensorsPulseMeter",
  "nodeid": 3,
  "batterySensor": true,
  "sensorid": 1,
  "appliedVoltage" : 220
  }

[Fredrik Carlsson]

Yes saw it on github, very interesting. Will try as soon as I am home again

[funky81]

@Fredrik-Carlsson please try it, please notice me if you find any bugs.
I'm in the middle of pull request to @Dheeraj

[Fredrik Carlsson]

Hello
haven't had the opportunity to test yet.
will try to find time tomorrow