@Yveaux 8 a 10 peoples max and afcourse on route of public transport?

count me in :)

reken maar op mij lijk me leuk
hoor wel als er een locatie is :)

@TheoL Hi i have been waiting for the NC sensor aswel
it is arived and stil needs the time to finish it :)
been a little busy @ work But i keep you uptodate

Greetz Bob

i am realy exited about this project.
if you need a person to test the stuff and has not much expirients about mysensors and stuff (meby to know if someone with minimal expiriets with mysensors know to make it work ) plz contact me

i have seen manny peoples that want to use mysensors but hasnt got the knowhow to make a good script/programming to make al the conponments work

solding and connection the parts is the simple part to me :)

greets and Good luck for the project!

Bob

i am going to try it when i am @ home
had a busy weekend with "sinterklaas"coming and all of the other things
and going to check of its a NC or NO is what i have got from aliexpress
when i am finished i wil post the script becose this will be my first zelf modified script
i realy want to know if what i have done is right and what can be better :) :)

Greetz Bob

hi guys

i am new to mysensors been a domoticz user for some time now
and have made the doorbell hack and works like a charm
the gateway is also working
i now have several sensebenders
and have them working with temp and humunity
only i want to add a doorsensor to the sensebender
but how do i insert the doorcontact in the sensebender script without damaging it low power usage things

can someone help me with this how i can merge the door sensor script into to sensebender script

i hope you guys can help me out :)

Thanks in andvance!

Greetz Bob

Great project
what script and stuff have you used?
i am very interested to make a temprature switch for my living room with that kind of display
great work :)

i am realy interested in this :) wil keep a eye on this topic :)
been searching for a way to make a thermostat that can be managed localy and with domoticz

i am also very interested in the arduino sketch and how you wired it :)

coppo23 are you still busy on the temprature display node?
i am very interested it that :)

Greetz :)

great! i am going to add this to my home domoticz! Thanks

Hi there :)

can i make a multi arduno with 2 sensors? To monitor my power and water usage
the example @ the website is for 1 if i put the other sensor on other pin and copy script and change the pin number and put the 2 script after ichother wil that work?

Greetz
BigDog