Posts made by csnij

Hi,

I order New rfm69 i think that they not working.

Is here somebody, they can some firmware wrote to check of the radio' s communicating.

Thanx chris

Hi,

I found the problem. I have severol times reinstold the arduino software and the liberys. now its uploading working.

gateway is finist.
now i traid a humedity sensor, but i have a message radio init fail
I have check the voltage. he is ok
Check the wire, is also ok.
What can i check more.

chris

chris

Hello,

I wil start with a simple humidity sensor and a rfm69 gatway in my vera.
Now i wil program the seriel gatway. but he gifs a error.
I have disabled some things in myconfig.h

This is the error:
WAARSCHUWING: Categorie '' in bibliotheek UIPEthernet is niet geldig. Wordt gewijzigd naar 'Uncategorized'
In file included from C:\Users\chris\AppData\Local\Temp\arduino_modified_sketch_351535\SerialGateway.ino:46:0:
C:\Program Files (x86)\Arduino\libraries\MySensors/MySigningAtsha204.h:40:3: error: conflicting declaration 'typedef struct whitelist_entry_t whitelist_entry_t'
} whitelist_entry_t;
^
In file included from C:\Users\chris\AppData\Local\Temp\arduino_modified_sketch_351535\SerialGateway.ino:45:0:
C:\Program Files (x86)\Arduino\libraries\MySensors/MySigningAtsha204Soft.h:44:3: error: 'whitelist_entry_t' has a previous declaration as 'typedef struct whitelist_entry_t whitelist_entry_t'
} whitelist_entry_t;

^
SerialGateway:67: error: conflicting declaration 'MySigningAtsha204Soft signer'
MySigningAtsha204Soft signer;
^
SerialGateway:66: error: 'signer' has a previous declaration as 'MySigningNone signer'
MySigningNone signer;
^
SerialGateway:68: error: conflicting declaration 'MySigningAtsha204 signer'
MySigningAtsha204 signer;
^
SerialGateway:66: error: 'signer' has a previous declaration as 'MySigningNone signer'
MySigningNone signer;
^
exit status 1
conflicting declaration 'MySigningAtsha204Soft signer'

What do i wrong,

chris

Thanks awi.

Hello,

i have build a gatway and a humidity/temp sensor from mysensor.org and its works perfectly.

now wil i start with a little wether station bild by my self to learn to write software for the arduino.
there must a humidity/temp, presser and a lux sensor in.
now saw i that the pressure (bmp085) and the lux sensor (bh1750) use the same pins.

How and were can i change one of this? i can't find it in the exampels to chance it.

thanks chris

Problem is resolved. see this. http://forum.mysensors.org/topic/1466/vera-lite-u17-serial-can-t-detect-device.

thanks
chris

Hi BulldogLowell,

I have the vera edge, witch ui that is, i don't now were you that can find it. but i found the problem i think. I use for the gateway not the antenne version.
I have the power to max and now its works.

BUT, in the vera, i have a red house with an unhappy face. and he said that one device is no longer connected. by the devices i look, and i see that that mysensors plugin the problem is. there is written that he no devices can't detect but everthing works. this is from the beginning.

what is the problem of this? can you help me with this proplem.

Thanks chris

Hello,

I have search on the site. but my chip can't find it. my chip is NRF M 24L01+1436AH Is there somewone on this forum they can tel me of this chip a fake or a good one is?

thanks chris

Twosh,

I have the capacitors placed. I think that i have clone chips.

thankyou

thank you Jan Gatzke.

Oke,

and how can i change this.
I can't find it.

chris

Hello,

I have a test setup white a hum and a temp sensor on my vera.
i have two problems.

Its works, i see a temp and a hum reading on mij vera. (thits is not my problem)

The problem is that the distance between the gateway and the node max 3meter is. above the 3meters i have no reading anemore.

And my vera gives a unhappy red face in the vera. and say can't detect device.

Chris.

Hello bulldoglwell,

thanks for your replay. but i have the baudrate at 9600 in the serial monitor.

I have tray all baudrats and baudrate 115200 see i the valuels.
i don't no why but it works

I am happy.

thanks for the help.

I have athome a vera edge with a lot of sensors.

now i wil tray to bild some things, and i found thise wonderfull site.
I have order some componets to build a weather station.

But i wil tray to understand what happens in the arduino file.
I have instal the software for the arduino, and the file of the solar weather station out the build tap of this forum.

Now i tray this; Serial.print("temperature"); with Serial.begin(9600); to see what happens,but i see strange characters in the serieel monitor of the arduino software. is this normale or do somthing wrong.
by a test file works it good and see i good and excepet valuels.

I hoop that you understand me, and sorry for my bad englisch.