Posts made by Mr.Osaka

Tank's for help and your great work.
I will learn C.
At the moment is more important my entire project, i wait the next release of MySensors.

I will publish soon a "resilient" Thermostat.

By,
Stefano

@Anticimex
I have put at end of setup(), but I have compile errors

/home/stef/Dropbox/Progetti/Thermostat.MySensor-v0.04/Thermostat.MySensor-v0.04.ino: In function 'void setup()':
Thermostat.MySensor-v0.04:192: error: 'build' was not declared in this scope
   sendRoute(build(msgHeater, 143, 200, NODE_SENSOR_ID, C_INTERNAL, I_REQUEST_SIGNING, false).set(true));
                                                                                            ^
Thermostat.MySensor-v0.04:192: error: 'sendRoute' was not declared in this scope
   sendRoute(build(msgHeater, 143, 200, NODE_SENSOR_ID, C_INTERNAL, I_REQUEST_SIGNING, false).set(true));

And what do you mean by <message buffer>?

MyMessage msgHeater(CHILD_ID_HVAC, V_STATUS);

msgHeater is <message buffer>?

ps: sorry for my essential english

@Anticimex said:

@Mr.Osaka
Not necessarily complicated (but untested).

unfortunately my knowledge of C are very superficial

I do not know if I found the right place to put code:

#ifdef MY_SIGNING_FEATURE
		// Notify gateway (and possibly controller) about the signing preferences of this node
		//sendRoute(build(msg, nc.nodeId, GATEWAY_ADDRESS, NODE_SENSOR_ID, C_INTERNAL, I_REQUEST_SIGNING, false).set(signer.requestSignatures()));
		// STEF INSERT
		sendRoute(build(msg, 143, 200, NODE_SENSOR_ID, C_INTERNAL, I_REQUEST_SIGNING, false).set(true));

unfortunately it was not successful

To probe, I set the node that receives the signed message as a repeater and I forced the transmitting node to become a child of this node.

to explain
Before
A ----> GW -----> B
now
A ----> B ----> GW
it was not successful too.

Hallo,
for linux user i wrote a helpful script for creating random key (32 hex) for
MyConfig.h - #define MY_HMAC_KEY with the correct formatting.

Stefano

#!/bin/bash

# mysensors_HMAC-key.sh
#
# generate a hex 32bit random key for 
# MyConfig.h - #define MY_HMAC_KEY 0x00,0x00,0x00,......
# 
#
# Created by Stefano Gottardi <st.gottardi (at) libero.it>
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# version 2 as published by the Free Software Foundation.

if ! which openssl > /dev/null
then
	echo "openssl is not installed"
	exit -1
fi

key=`openssl rand -hex 32`
COUNTER=2
MYSENS_KEY="0x${key:0:2}"

until [  $COUNTER -eq 64 ]; do
	STRING=${key:$COUNTER:2}
	MYSENS_KEY="$MYSENS_KEY,0x$STRING"
	let COUNTER+=2
done

echo $MYSENS_KEY

exit 0

the answer for this problem is here
technically possible, but hard to implement.
Stefano

@Anticimex thanks for the answer

@Anticimex I have a similar problem with my project of a thermostat. I use softsigned messages. I communicate from thermostat-node the aperture of valve to the valve-controller-node via gateway, but the message is not signed.
here I wrote the sketch and logs.
I also tried with MY_SECURE_NODE_WHITELISTING, but without results.

Is possible use this scenario with the stable branch?

Thanks for your help

Stefano

Hi, i use MySensors 1.5.4. I test the software version signing.
If i send a message to another node the signing is lost.

the code

/**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.8
 *
 *******************************
 *
 * DESCRIPTION
 *
 */


// set node id
#define NODE_ID 143


// select MySigningAtsha204Soft
#define Atsha204Soft
// select MySigningAtsha204 with hardware
//#define Atsha204hw


#include <MySensor.h>

#ifdef Atsha204Soft
  #include <MySigningAtsha204Soft.h>
#elif defined Atsha204hw
  #include <MySigningAtsha204.h>  
#endif  

#include <MyHwATMega328.h>
MyHwATMega328 hw; // Select AtMega328 hardware profile


MyTransportNRF24 radio;  // NRFRF24L01 radio driver

#ifdef Atsha204Soft
  MySigningAtsha204Soft signer(true);
  MySensor gw(radio, hw, signer);
#elif defined Atsha204hw
  MySigningAtsha204 signer; // Select HW ATSHA signing backend
  MySensor gw(radio, hw, signer);
#else
  MySensor gw(radio, hw);
#endif

#include <SPI.h>
#include <Wire.h>


#define CHILD_ID_HVAC 0
#define CHILD_ID_TEMP 1

// Initialize temperature message
MyMessage msgTemp(CHILD_ID_TEMP, V_TEMP);


// Initialize thermostat message
MyMessage msgHeater(CHILD_ID_HVAC, V_STATUS);


boolean metric = true;

int Sleep_time = 3000;

float temperature; 

byte heating;

void setup()  
{ 
  // Startup and initialize MySensors library. Set callback for incoming messages.
  gw.begin(NULL, NODE_ID);
  
 
  // Register all sensors to gw (they will be created as child devices)
  gw.present(CHILD_ID_TEMP, S_TEMP);

    
  // termostato
  gw.present(CHILD_ID_HVAC, S_HVAC);
  
//*******************************  

  msgHeater.setDestination(200);
  
//*******************************
  

  metric = gw.getConfig().isMetric;

  heating = 1;
  temperature = 24;  
}


void loop()     
{ 
  
  // Process incoming messages (like config from server)
  gw.process();
  

    
  gw.send(msgTemp.set(temperature,1));
  gw.send(msgHeater.set(heating,1));
  
  gw.sleep(Sleep_time);

}

MyConfig.h

/**
 * The MySensors Arduino library handles the wireless radio link and protocol
 * between your home built sensors/actuators and HA controller of choice.
 * The sensors forms a self healing radio network with optional repeaters. Each
 * repeater and gateway builds a routing tables in EEPROM which keeps track of the
 * network topology allowing messages to be routed to nodes.
 *
 * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
 * Copyright (C) 2013-2015 Sensnology AB
 * Full contributor list: https://github.com/mysensors/Arduino/graphs/contributors
 *
 * Documentation: http://www.mysensors.org
 * Support Forum: http://forum.mysensors.org
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 */


#ifndef MyConfig_h
#define MyConfig_h
#include <stdint.h>

// Enable debug flag for debug prints. This will add a lot to the size of the final sketch but good
// to see what is actually is happening when developing
#define DEBUG

// Disable this line, If you are using TX(1), RX(0) as normal I/O pin
#define ENABLED_SERIAL

// Serial output baud rate (for debug prints and serial gateway)
#define BAUD_RATE 115200


/**********************************
*  Over the air firmware updates
***********************************/

// The following define enables the safe over-the-air firmware update feature
// which requires external flash and the DualOptiBoot bootloader.
// Note: You can still have OTA FW updates without external flash but it
// requires the MYSBootloader and disabled MY_OTA_FIRMWARE_FEATURE
//#define MY_OTA_FIRMWARE_FEATURE
// Slave select pin for external flash
#define MY_OTA_FLASH_SS 8
// Flash jdecid
#define MY_OTA_FLASH_JDECID 0x1F65


/**********************************
*  Information LEDs blinking
***********************************/
// This feature enables LEDs blinking on message receive, transmit
// or if some error occured. This was commonly used only in gateways,
// but now can be used in any sensor node. Also the LEDs can now be
// disabled in the gateway.

//#define WITH_LEDS_BLINKING

// The following setting allows you to inverse the blinking feature WITH_LEDS_BLINKING
// When WITH_LEDS_BLINKING_INVERSE is enabled LEDSs are normally turned on and switches
// off when blinking

#define WITH_LEDS_BLINKING_INVERSE


// default LEDs blinking period in milliseconds
#define DEFAULT_LED_BLINK_PERIOD 300
// The RX LED default pin
#define DEFAULT_RX_LED_PIN 6
// The TX LED default pin
#define DEFAULT_TX_LED_PIN 5
// The Error LED default pin
#define DEFAULT_ERR_LED_PIN 4


/**********************************
*  Message Signing Settings
***********************************/
// Disable to completly disable signing functionality in library
#define MY_SIGNING_FEATURE

// Define a suitable timeout for a signature verification session
// Consider the turnaround from a nonce being generated to a signed message being received
// which might vary, especially in networks with many hops. 5s ought to be enough for anyone.
#define MY_VERIFICATION_TIMEOUT_MS 5000

// Enable to turn on whitelisting
// When enabled, a signing node will salt the signature with it's unique signature and nodeId.
// The verifying node will look up the sender in a local table of trusted nodes and
// do the corresponding salting in order to verify the signature.
// For this reason, if whitelisting is enabled on one of the nodes in a sign-verify pair, both
// nodes have to implement whitelisting for this to work.
// Note that a node can still transmit a non-salted message (i.e. have whitelisting disabled)
// to a node that has whitelisting enabled (assuming the receiver does not have a matching entry
// for the sender in it's whitelist)
//#define MY_SECURE_NODE_WHITELISTING

// MySigningAtsha204 default setting
#define MY_ATSHA204_PIN 17 // A3 - pin where ATSHA204 is attached

// MySigningAtsha204Soft default settings
#define MY_RANDOMSEED_PIN 7 // A7 - Pin used for random generation (do not connect anything to this)

// Key to use for HMAC calculation in MySigningAtsha204Soft (32 bytes)
#define MY_HMAC_KEY 0x00,0x01,0x02,0x03,0x04,0x05,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00

/**********************************
*  NRF24L01 Driver Defaults
***********************************/
#define RF24_CE_PIN		   9
#define RF24_CS_PIN		   10
#define RF24_PA_LEVEL 	   RF24_PA_MAX
#define RF24_PA_LEVEL_GW   RF24_PA_MAX
// RF channel for the sensor net, 0-127
#define RF24_CHANNEL	   76
//RF24_250KBPS for 250kbs, RF24_1MBPS for 1Mbps, or RF24_2MBPS for 2Mbps
#define RF24_DATARATE 	   RF24_250KBPS
// This is also act as base value for sensor nodeId addresses. Change this (or channel) if you have more than one sensor network.
#define RF24_BASE_RADIO_ID ((uint64_t)0xA8A8E1FC00LL)

// Enable SOFTSPI for NRF24L01 when using the W5100 Ethernet module
//#define SOFTSPI
#ifdef SOFTSPI
	// Define the soft SPI pins used for NRF radio
	const uint8_t SOFT_SPI_MISO_PIN = 16;
    const uint8_t SOFT_SPI_MOSI_PIN = 15;
    const uint8_t SOFT_SPI_SCK_PIN = 14;
#endif


/**********************************
*  RFM69 Driver Defaults
***********************************/
// Default network id. Use the same for all nodes that will talk to each other
#define RFM69_NETWORKID     100

// Default frequency to use. This must match the hardware version of the RFM69 radio (uncomment one):
// #define RFM69_FREQUENCY   RF69_433MHZ
#define RFM69_FREQUENCY   RF69_868MHZ
//#define FREQUENCY     RF69_915MHZ

// Enable this for encryption of packets
//#define RFM69_ENABLE_ENCRYPTION
#define RFM69_ENCRYPTKEY    "sampleEncryptKey" //exactly the same 16 characters/bytes on all nodes!




#endif

log with msgHeater.setDestination(200);

send: 143-143-0-0 s=255,c=3,t=15,pt=2,l=2,sg=0,st=ok:1
read: 0-0-143 s=255,c=3,t=15,pt=2,l=2,sg=0:1
send: 143-143-0-0 s=255,c=3,t=16,pt=0,l=0,sg=0,st=ok:
read: 0-0-143 s=255,c=3,t=17,pt=6,l=25,sg=0:01B3F448E00B03DE197731D7302FC7167D50E9F50B77C63700
send: 143-143-0-0 s=255,c=0,t=17,pt=0,l=5,sg=1,st=ok:1.5.4
send: 143-143-0-0 s=255,c=3,t=16,pt=0,l=0,sg=0,st=ok:
read: 0-0-143 s=255,c=3,t=17,pt=6,l=25,sg=0:01760D40777B6F77FB01DB9885D5E308FEA51F1A08C6FB2062
send: 143-143-0-0 s=255,c=3,t=6,pt=1,l=1,sg=1,st=ok:0
sensor started, id=143, parent=0, distance=1
send: 143-143-0-0 s=1,c=0,t=6,pt=0,l=0,sg=0,st=ok:
send: 143-143-0-0 s=0,c=0,t=29,pt=0,l=0,sg=0,st=ok:
send: 143-143-0-0 s=1,c=3,t=16,pt=0,l=0,sg=0,st=ok:
read: 0-0-143 s=255,c=3,t=17,pt=6,l=25,sg=0:0113FB50BA8E123562556FFB438496DD27EE929E73D8B05435
send: 143-143-0-0 s=1,c=1,t=0,pt=7,l=5,sg=1,st=ok:24.0
send: 143-143-0-200 s=0,c=1,t=2,pt=7,l=5,sg=0,st=ok:1.0
send: 143-143-0-0 s=1,c=3,t=16,pt=0,l=0,sg=0,st=ok:
read: 0-0-143 s=255,c=3,t=17,pt=6,l=25,sg=0:01064049BBFFF98FDAD1841895BC33ECDDA202E66BDB9D045F
send: 143-143-0-0 s=1,c=1,t=0,pt=7,l=5,sg=1,st=ok:24.0
send: 143-143-0-200 s=0,c=1,t=2,pt=7,l=5,sg=0,st=ok:1.0

log without msgHeater.setDestination(200);

send: 143-143-0-0 s=255,c=3,t=15,pt=2,l=2,sg=0,st=ok:1
read: 0-0-143 s=255,c=3,t=15,pt=2,l=2,sg=0:1
send: 143-143-0-0 s=255,c=3,t=16,pt=0,l=0,sg=0,st=ok:
read: 0-0-143 s=255,c=3,t=17,pt=6,l=25,sg=0:01B3F448E00B03DE197731D7302FC7167D50E9F50B77C63700
send: 143-143-0-0 s=255,c=0,t=17,pt=0,l=5,sg=1,st=ok:1.5.4
send: 143-143-0-0 s=255,c=3,t=16,pt=0,l=0,sg=0,st=ok:
read: 0-0-143 s=255,c=3,t=17,pt=6,l=25,sg=0:0113FB50BA8E123562556FFB438496DD27EE929E73D8B05435
send: 143-143-0-0 s=255,c=3,t=6,pt=1,l=1,sg=1,st=ok:0
sensor started, id=143, parent=0, distance=1
send: 143-143-0-0 s=1,c=0,t=6,pt=0,l=0,sg=0,st=ok:
send: 143-143-0-0 s=0,c=0,t=29,pt=0,l=0,sg=0,st=ok:
send: 143-143-0-0 s=1,c=3,t=16,pt=0,l=0,sg=0,st=ok:
read: 0-0-143 s=255,c=3,t=17,pt=6,l=25,sg=0:01064049BBFFF98FDAD1841895BC33ECDDA202E66BDB9D045F
send: 143-143-0-0 s=1,c=1,t=0,pt=7,l=5,sg=1,st=ok:24.0
send: 143-143-0-0 s=0,c=3,t=16,pt=0,l=0,sg=0,st=ok:
read: 0-0-143 s=255,c=3,t=17,pt=6,l=25,sg=0:0113FB50BA8E123562556FFB438496DD27EE929E73D8B05435
send: 143-143-0-0 s=0,c=1,t=2,pt=7,l=5,sg=1,st=ok:1.0

Arduino ide 1.6.1
the node is arduino nano and gateway is a mini pro over a Raspberry Pi via serial

I don't now if is a bug or a programming error.
Thank you for help

Stefano

p.s.: sorry for the broken english