Navigation

    • Register
    • Login
    • OpenHardware.io
    • Categories
    • Recent
    • Tags
    • Popular
    1. Home
    2. stingone
    3. Topics
    • Profile
    • Following
    • Followers
    • Topics
    • Posts
    • Best
    • Groups

    Topics created by stingone

    • stingone

      How to build a repeater
      General Discussion • • stingone  

      14
      0
      Votes
      14
      Posts
      7884
      Views

      stingone

      @mfalkvidd said: @stingone what does the serial debug output say? TSM:UPL TSP:PING:SEND (dest=0) !TSP:MSG:SEND 6-6-0-0 s=255,c=3,t=24,pt=1,l=1,sg=0,ft=0,st=fail:1 TSP:CHKUPL:FAIL (hops=255) !TSM:UPL:FAIL TSM:FPAR TSP:MSG:SEND 6-6-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc: !TSP:SEND:TNR TSP:MSG:READ 5-5-6 s=255,c=3,t=8,pt=1,l=1,sg=0:1 TSP:MSG:FPAR RES (ID=5, dist=1) TSP:MSG:PAR OK (ID=5, dist=2) !TSP:SEND:TNR TSM:FPAR:OK TSM:ID TSM:CHKID:OK (ID=6) TSM:UPL TSP:PING:SEND (dest=0) !TSP:MSG:SEND 6-6-5-0 s=255,c=3,t=24,pt=1,l=1,sg=0,ft=0,st=fail:1 TSP:CHKUPL:FAIL (hops=255) !TSM:UPL:FAIL TSM:FPAR TSP:MSG:SEND 6-6-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc: Init complete, id=6, parent=255, distance=255, registration=1 !TSP:SEND:TNR``` Starting sensor (RNNNA-, 2.0.0) TSM:INIT TSM:RADIO:OK TSP:ASSIGNID:OK (ID=6) TSM:FPAR TSP:MSG:SEND 6-6-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc: TSM:FPAR TSP:MSG:SEND 6-6-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc: TSM:FPAR TSP:MSG:SEND 6-6-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc: TSM:FPAR TSP:MSG:SEND 6-6-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc: !TSM:FPAR:FAIL !TSM:FAILURE TSM:PDT TSM:INIT TSM:RADIO:OK TSP:ASSIGNID:OK (ID=6) TSM:FPAR TSP:MSG:SEND 6-6-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc: TSM:FPAR TSP:MSG:SEND 6-6-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc: TSM:FPAR TSP:MSG:SEND 6-6-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc: TSM:FPAR TSP:MSG:SEND 6-6-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc: !TSM:FPAR:FAIL !TSM:FAILURE TSM:PDT TSM:INIT TSM:RADIO:OK TSP:ASSIGNID:OK (ID=6) TSM:FPAR TSP:MSG:SEND 6-6-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc: TSM:FPAR TSP:MSG:SEND 6-6-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc: TSM:FPAR TSP:MSG:SEND 6-6-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc: TSM:FPAR TSP:MSG:SEND 6-6-255-255 s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=bc: !TSM:FPAR:FAIL !TSM:FAILURE TSM:PDT
    • stingone

      Problems dallas tempsensor
      Troubleshooting • • stingone  

      5
      0
      Votes
      5
      Posts
      1588
      Views

      stingone

      @Boots33 said: @stingone That is a known issue with the latest dallas library. See this post for the fix Many thanks.. works all fine now had indeed the wrong datasheet...
    • stingone

      Help on code for Mysensors 2.0
      Development • • stingone  

      11
      0
      Votes
      11
      Posts
      3359
      Views

      stingone

      @mfalkvidd said: It depends on how much work you are prepared to do and how much flexibility you want in the code. If you only use one temperature sensor and don't have any plans to add more, change gw.send(msg.setSensor(i).set(temperature,1)); gw.send(msg.set(temperature,1)); Only using the ph sensor and 1 temperatuur sensor no need for more temp sensors.
    • stingone

      PH and Temp controller
      My Project • • stingone  

      1
      1
      Votes
      1
      Posts
      1423
      Views

      No one has replied

    • stingone

      Telephone line switch
      General Discussion • • stingone  

      4
      0
      Votes
      4
      Posts
      1351
      Views

      mfalkvidd

      The relay example should work fine I think.
    • stingone

      Combined sketch PH meter and Temp Sensor
      General Discussion • • stingone  

      3
      0
      Votes
      3
      Posts
      1414
      Views

      stingone

      These are the reading i got. send: 2-2-0-0 s=255,c=3,t=15,pt=2,l=2,sg=0,st=ok:0 send: 2-2-0-0 s=255,c=0,t=17,pt=0,l=5,sg=0,st=ok:1.5.3 send: 2-2-0-0 s=255,c=3,t=6,pt=1,l=1,sg=0,st=ok:0 read: 0-0-2 s=255,c=3,t=6,pt=0,l=1,sg=0:M sensor started, id=2, parent=0, distance=1 send: 2-2-0-0 s=255,c=3,t=11,pt=0,l=7,sg=0,st=ok:pHmeter send: 2-2-0-0 s=255,c=3,t=12,pt=0,l=3,sg=0,st=ok:1.0 send: 2-2-0-0 s=0,c=0,t=21,pt=0,l=0,sg=0,st=ok: send: 2-2-0-0 s=0,c=0,t=6,pt=0,l=0,sg=0,st=ok: pH:3.36 send: 2-2-0-0 s=0,c=1,t=24,pt=7,l=5,sg=0,st=ok:3.36 send: 2-2-0-0 s=0,c=1,t=0,pt=7,l=5,sg=0,st=ok:21.3 send: 2-2-0-0 s=0,c=1,t=0,pt=7,l=5,sg=0,st=ok:21.1 send: 2-2-0-0 s=0,c=1,t=0,pt=7,l=5,sg=0,st=ok:21.0 send: 2-2-0-0 s=0,c=1,t=0,pt=7,l=5,sg=0,st=ok:20.8 pH:3.86 send: 2-2-0-0 s=0,c=1,t=24,pt=7,l=5,sg=0,st=ok:3.86 The 14.79 is from the PH the rest the temp sensor. as you can see both values are on parent 0. is it possible to get the ph on parent 0 and the temp on 1?
    • stingone

      PH Probe code
      My Project • • stingone  

      6
      0
      Votes
      6
      Posts
      1733
      Views

      szybki946

      I'm not a programmer, I can not fix it
    • stingone

      PH and Temp controller with arduino
      My Project • • stingone  

      3
      0
      Votes
      3
      Posts
      3921
      Views

      stingone

      Thanks still need to find out where to start and if i need a uno or nano. i also want to make it wireless. and indeed i want to submerse it permanent. i will buy a better one