@Cliff-Karlsson said:

int numSensors=0;

It seems that you have 0 temp sensors
treb0r

The sketch works with both reeds switches (2 windows) but how to integreate it with DS18B20 temp sensor? I also power it with battery, so I would like to check the temp eg every 5min and if it is changed then send the new value to the controler. How to wake up arduino only if any window is opened or temp is changed (after 5 min)
Thanks
treb0r

When you add scene it is displayed in Scenes section, not in the switches section.

@Cliff-Karlsson said:

int numSensors=0;

It seems that you have 0 temp sensors
treb0r

@jribera Your sketch works perfectly
I am trying to add also 433 receiver to allow domoticz update states of the switches is the Socket is switched on or off by remote control. Does anybody know how to do that? After receiving certain code change the state of the corresponding socket.
treb0r

@NeverDie said:

That seems like a great prices on the wind sensor. Unfortunately, it looks as though Malin won't ship to the USA.

You can always find somebody who can buy and send it for you I have this privilege that my friend goes to UK very often so he brought me some pcs from Maplin
treb0r

I have this one:http://www.maplin.co.uk/search?text=Maplin+Replacement+Wind+Speed+Sensor+for+N96FY
Is much cheaper and works. It has one reed switch, and one turn/s indicates 2,4 km/h
For rain gauge I have also this part. http://www.maplin.co.uk/search?text=Maplin+Replacement+Wind+Speed+Sensor+for+N96FY
Works in the same way
Here you have how it looks inside: http://www.philpot.me/weatherinsider.html
and here you have some code:
http://sandaysoft.com/forum/viewtopic.php?f=16&t=10868

treb0r

@marceltrapman
Because in case of door/window sensor it is better looking, when you have sth small sticked to the frame

I found such board with ATtiny84 and NRF24L01.
http://nettigo.pl/products/bezprzewodowy-sensor-tinybrd
I am trying to find out from the producers if mysensors library will also work on it.
What do you think? Hardware site is already done. Will it be possible to run sketches with mysensors on it?
Regards

Hi
I have found such connection of NRF24L01 and ATtiny84. Do you think that mysensors could also work on such "tinyBrd" If you need some help with translation, do not hesitate to ask. I am at your disposal
http://nettigo.pl/products/bezprzewodowy-sensor-tinybrd
treb0r

@BulldogLowell
OK, I will post the video. If I will manage I will also post serial output
treb0r