Switching gateway issues



  • Howdy all,

    I currently have a ESP8266 Wemos based gateway that I have been using for years. I am flipping over to using a Orange Pi Zero based gateway and everything is working with the MQTT part, it connects to the MQTT gateway on my Home Assistant instance, but I only see the "/mysgw1-in/0/255/0/0/18 2.3.1" message. I see its doing things like:

    Dec 02 14:35:45 INFO  Starting gateway...
    Dec 02 14:35:45 INFO  Protocol version - 2.3.1
    Dec 02 14:35:45 DEBUG MCO:BGN:INIT GW,CP=RNNGL-Q-,REL=255,VER=2.3.1
    Dec 02 14:35:45 DEBUG TSF:LRT:OK
    Dec 02 14:35:45 DEBUG TSM:INIT
    Dec 02 14:35:45 DEBUG TSF:WUR:MS=0
    Dec 02 14:35:45 DEBUG TSM:INIT:TSP OK
    Dec 02 14:35:45 DEBUG TSM:INIT:GW MODE
    Dec 02 14:35:45 DEBUG TSM:READY:ID=0,PAR=0,DIS=0
    Dec 02 14:35:45 DEBUG MCO:REG:NOT NEEDED
    Dec 02 14:35:45 DEBUG MCO:BGN:STP
    Dec 02 14:35:45 DEBUG MCO:BGN:INIT OK,TSP=1
    Dec 02 14:35:45 DEBUG GWT:RMQ:MQTT RECONNECT
    Dec 02 14:36:00 DEBUG connected to 10.200.62.50
    Dec 02 14:36:00 DEBUG GWT:RMQ:MQTT CONNECTED
    Dec 02 14:36:00 DEBUG GWT:TPS:TOPIC=/mysgw1-in/0/255/0/0/18,MSG SENT
    Dec 02 14:36:00 DEBUG TSM:READY:NWD REQ
    Dec 02 14:36:13 DEBUG TSF:MSG:SEND,0-0-255-255,s=255,c=3,t=20,pt=0,l=0,sg=0,ft=0,st=OK:
    Dec 02 14:50:45 DEBUG TSF:SAN:OK
    

    But the nodes I have deployed dont want to talk to this new gateway. Even though its the same gateway ID and such. Here is a debug from one of my sensors. Any ideas?

     __  __       ____
    |  \/  |_   _/ ___|  ___ _ __  ___  ___  _ __ ___
    | |\/| | | | \___ \ / _ \ `_ \/ __|/ _ \| `__/ __|
    | |  | | |_| |___| |  __/ | | \__ \  _  | |  \__ \
    |_|  |_|\__, |____/ \___|_| |_|___/\___/|_|  |___/
            |___/                      2.3.1
    
    208 MCO:BGN:INIT NODE,CP=RNNNA---,REL=255,VER=2.3.1
    331 TSM:INIT
    344 TSF:WUR:MS=0
    368 TSM:INIT:TSP OK
    389 TSM:INIT:STATID=14
    413 TSF:SID:OK,ID=14
    436 TSM:FPAR
    483 TSF:MSG:SEND,14-14-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
    2560 !TSM:FPAR:NO REPLY
    2584 TSM:FPAR
    2633 TSF:MSG:SEND,14-14-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
    4710 !TSM:FPAR:NO REPLY
    4734 TSM:FPAR
    4784 TSF:MSG:SEND,14-14-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
    6860 !TSM:FPAR:NO REPLY
    6885 TSM:FPAR
    6934 TSF:MSG:SEND,14-14-255-255,s=255,c=3,t=7,pt=0,l=0,sg=0,ft=0,st=OK:
    9011 !TSM:FPAR:FAIL
    9031 TSM:FAIL:CNT=1
    9052 TSM:FAIL:DIS
    9070 TSF:TDI:TSL 
    


  • @brian-morris Maybe clear eeprom and reflash all devices? Could be old routing data retained? Just a thought.



  • Tried that. No change.



  • Are you sure the node can reach the gateway? So is the connection okay?


Log in to reply
 

Suggested Topics

31
Online

11.2k
Users

11.1k
Topics

112.5k
Posts