How to protect your outdoor sensor
-
This thread brought up the subject of outdoor sensor protection which I think is interesting as a separate discussion. Like said, there should be many users with experience to share? (Sensor type, supply, duty, enclosure, time, environment, inspection notes etc ?) I've only read these this far: link, link.
I'm no expert but have some experience from electric-/electronic equipment failures in outdoor enclosures with insufficient protection. I'd say temperature variation and corrosion is common (sometimes galvanically accelerated) and with electrical failure as a secondary effect. A completely sealed casing is not realistic because the temperature and pressure variation will eventually make it leak. A ventilated design (long pipe?) should be much better in this perspective.
On the other hand are there many reports of sensors in operation for years without any particular considerations. Because of this I'm not very anxious when planning my own designs. But I like to stay safe and I think it's easy to add a few Watts heating resistor when there is good power supply for it. My next level precaution measure I can think of would probably be to apply a suitable coating to pcb, solder pads and other naked parts.Tried to research the subject without finding good spot on info. Read a few (most commercial) texts. Maybe some inspiration... link, link , link, link, link,
Then there's always the harsh automotive branch to learn from (larger/faster temp variations): link, link
-
I am interested in what people have tried. For example i am creating an outdoor soil moisture + Light sensor + either temperature only or temp/humidity sensor. I am very concerned how to weatherproof while still getting accurate data.
-
I planned to have the soil moisture sticking out of my enclosure but sealed so that all the connections and electronics are inside the enclosure. The enclosure basically sitting on the soil with the prongs from the sensor in the soil.
-
lThe Light sensor I was hoping to have sealed in the enclosure but with a clear plastic window. I am not sure how to keep this from fogging up.
-
The temp/humidity sensor should be measuring outside air, so it would need to have air flow. However I do not think this sensor could handle being in the rain so it would still need to be protected. I am not really sure how to get good air flow but protect this sensor from being splashed by rain.
I would love to hear what other people have done. I will post some pictures if i ever get finished.
-
Suggested Topics
-
Pass reset on forum
General Discussion • 16 Apr 2014, 06:49 • Dvbit 17 Apr 2014, 03:28 -
Please help with rspro itx 3d printer
Enclosures / 3D Printing • 17 Mar 2021, 02:49 • malachite666 15 Nov 2022, 09:19 -
3d printing for accessories designer
Enclosures / 3D Printing • 8 Jan 2021, 11:01 • laurabarreda 25 Apr 2023, 03:37 -
3D printed housing for an MQTT-GW
Enclosures / 3D Printing • 21 Dec 2020, 11:21 • bgunnarb 3 Jan 2021, 18:53 -
Enclosure/Bumper for Easy/Newbie PCB
Enclosures / 3D Printing • 28 Mar 2017, 21:11 • barduino 23 Dec 2020, 12:46 -
Best 3d printers
Enclosures / 3D Printing • 8 Jun 2019, 09:52 • Crumpy10 20 Jan 2023, 20:57